Complaint
| Factory Direct |
| For Plastics, metal, wood, rubber, paper, and leather.And other requirements |
| Fast curing speed, 1 to 3 seconds for the first time curing, 15 seconds for all curing |
| The viscosity, high strength, and high strength of the adhesive is suitable for various purposes. |
| One-drop applicator for accurate gluing & leak-proof cap to prevent drying |
Item No. | HCP-107 | |
Chemical Composition: | One part cyanoacrylate | |
Appearance | Liquid | |
Color: | Clear | |
Application temperature | Room temperature | |
Service Temperature | -65°F to 180°F (-54 to 82°C) | |
Set Time: | 10-30s | |
Full Strength: | 24 hours | |
Shelf life | 2 years | |
Packing | 3g*12pcs/card 24cards/ctn | |
GW | 4.7kgs | |
CTN | 42*24*36cm | |
| 1. Use a dry cloth or paper make surface dust, oil agent, and steel embroidery removed |
| 2. Open the front cover and with the flick of a fingertip part, so there is no residual liquid, and then attached to the needle poke open cavity |
| 3. On the face, drop a little agent, then immediately, and keep hardening, hardening time is a few seconds to a few minutes; about 30 minutes to reach the practical strength, 1-2 hours after the highest strength |
| 4. After use wipe the container tip, and the lid. |
Company Profile
