High quality/High cost performance Inch Taper Roller Bearing Automotive Bearing 33022 & 30221j2 for Car Front Wheel

Min.Order: 1

Product origin: Luoyang, Henan, China

Infringement complaint:

Complaint

US$ 0.5 ~ 15

Description

Tapered roller bearing refers to radial thrust type rolling bearing with tapered roller rolling body. There are two kinds of small cone Angle and large cone Angle. Small cone Angle mainly bear radial load mainly radial and axial combined load, often in double use, reverse installation, inner and outer seat ring can be installed separately, radial and axial clearance can be adjusted during installation and use; The large cone Angle is mainly used to bear the combined axial and radial loads mainly based on axial loads. It is generally not used to bear pure axial loads alone, but can be used to bear pure radial loads when it is configured (the same end is installed relatively).

Tapered roller bearings belong to separation bearings, bearing inner and outer rings have tapered raceway. The bearings can be divided into single row, double row and four row tapered roller bearings according to the number of roller rows. Single row tapered roller bearings can withstand radial load and single direction axial load. When the bearing bears radial load, there will be an axial component, so when another bearing that can withstand the axial force in the opposite direction is needed to balance it.

The structure, assembly dimension accuracy and rotation accuracy of inch tapered roller bearings are different from those of metric bearings .It is mainly used for imported machinery or industries with special needs.

The inch tapered roller bearing refers to the tapered roller bearing whose overall dimensions are measured in inches , originated from Britain and the United States.

Product Specification

30200 Series

Bearing No.	Dimensions			Basic load Rating (KN)		Pu	Rotation speed (rpm)		Weight (kg)
Bearing No.	d1	D	B	Cr	Cor	Pu	Speed grade	Speed limit	Weight (kg)
30244J2	220	400	72	990	1400	129	1200	1600	40.0
30240J2	200	360	64	792	1120	106	1300	1700	25.0
30238J2	190	340	60	721	1000	95	1400	1800	24.0
30236J2	180	320	57	583	815	80	1500	2000	20.0
30234J2	170	310	57	616	865	83	1500	2000	19.0
30232J2	160	290	52	528	735	72	1600	2200	13.0
30230	150	270	49	429	560	57	1800	2400	11.0
30228J2	140	250	45.75	418	570	58.5	1900	2600	8.65
30226J2	130	230	43.75	369	490	53	2000	2800	7.60
30224J2	120	215	43.5	341	465	49	2200	3000	6.15
33024	120	180	48	292	540	56	2600	3400	4.20
30222J2	110	200	41	308	405	45	2400	3200	5.10
33022	110	170	47	281	500	53	2600	3600	3.85
30221J2	105	190	39	270	355	40	2600	3400	4.25
33021/Q	105	160	43	246	430	45.5	2800	3800	3.05
30220J2	100	180	37	246	320	36	2800	3600	3.65
33020/Q	100	150	39	224	390	41.5	3000	4000	2.40
30219J2	95	170	34.5	216	275	31.5	2800	3800	3.00
30218J2	90	160	32.5	194	245	28.5	3000	4000	2.55
30217J2/Q	85	150	30.5	176	220	25.5	3200	4300	2.05
30216J2/Q	80	140	28.25	151	183	21.2	3400	4800	1.60
30215J2/Q	75	130	27.25	140	176	20.4	3800	5000	1.40
30214J2/Q	70	125	26.25	125	156	18	4000	5300	1.25
30213J2/Q	65	120	24.75	132	134	16.3	4500	5600	1.15
30212J2/Q	60	110	23.75	112	114	13.2	5000	6000	0.88
30211J2/Q	55	100	22.75	104	106	12	5300	6700	0.70
30210J2/Q	50	90	21.75	86.5	91.5	10.4	6000	7500	0.54
30209J2/Q	45	85	20.75	76.5	76.5	8.65	6300	8000	0.48
30208J2/Q	40	80	19.75	71	68	7.65	7000	8500	0.42
30207J2/Q	35	72	18.25	58.5	56	6.1	8000	9500	0.32
30206J2/Q	30	62	17.3	46.5	44.0	4.8	9000	11000	0.23
302/28J2	28	58	17.3	38.0	41.5	4.4	9000	12000	0.25
30205J2/Q	25	52	16.3	35.5	33.5	3.5	11000	13000	0.15
30204J2/Q	20	47	15.3	32.0	28.0	3.0	12000	15000	0.12
30203J2	17	40	13.3	19.0	18.6	1.8	13000	18000	0.08

30300 Series

Bearing No.	Dimensions (mm)			Basic Load Rating (KN)		Pu	Rotation Speed (rpm)		Weight (Kg)
	d1	D	B	Cr	Cor		Rotation Speed (rpm)
	d1	D	B	Cr	Cor		Speed Grade	Speed Limit
30352J2	260	540	113	2120	3050	250	850	1200	110
30332J2	160	340	75	913	1180	114	1500	2000	29.0
33030	150	225	59	457	865	86.5	2000	2600	8.15
30326J2	130	280	63.75	627	800	83	1800	2400	17.0
30324J2	120	260	59.5	561	710	73.5	2000	2600	14.0
30322J2	110	240	54.5	473	585	62	2200	2800	11.0
30320J2	100	215	51.5	402	490	53	2400	3200	8.05
30319	95	200	49.5	330	390	42.5	2600	3400	6.70
30318J2	90	190	46.5	330	400	44	2600	4000	5.65
30317J2	85	180	44.5	303	365	40.5	2800	4000	4.85
30316J2	80	170	42.5	270	320	38	3000	4300	4.10
30315J2/Q	75	160	40	246	290	34	3200	4300	3.45
30314J2/Q	70	150	38	220	260	31	3400	4500	2.90
30313J2/Q	65	140	36	194	228	27.5	3600	4800	2.40
30312J2/Q	60	130	33.5	168	196	23.6	4000	5300	1.95
30311J2/Q	55	120	31.5	166	163	19.3	4800	5600	1.55
30310J2/Q	50	110	29.25	143	140	16.6	5300	6300	L25
30309J2/Q	45	100	27.25	125	120	14.3	5600	7000	0.97
30308J2/Q	40	90	25.25	100	95	10.8	6300	8000	0.72
30307J2/Q	35	80	22.75	83	73.5	8.3	7500	9000	0.52
30306J2/Q	30	72	20.75	64	56	6.4	8000	10000	0.39
30305J2	25	62	18.25	44.6	43	4.75	9000	12000	0.26
30304J2/Q	20	52	16.25	39	32.5	3.6	12000	14000	0.17
32303J2/Q	17	47	20.25	40	33.5	3.65	12000	16000	0.17
30303J2	17	47	15.25	28.1	25	2.75	12000	16000	0.13

31300 Series

Bearing No.	Dimensions (mm)			Basic Load Rating (KN)		Pu	Rotation Speed(rpm)		Weight (Kg)
Bearing No.	di	D	B	Cr	Cor	Pu	Speed Grade	Speed Limit	Weight (Kg)
31330XJ2	150	320	82	781	1020	100	1400	2000	29.5
31328XJ2	140	300	77	693	900	88	1500	2200	24.5
31326XJ2	130	280	72	605	780	81.5	1600	2400	18.5
31324XJ2	120	260	68	539	695	73.5	1700	2400	15.5
31322XJ2	110	240	63	457	585	62	1900	2800	12.0
31320XJ2/CL7CVQ051	100	215	56.5	430	465	51	2400	3000	8.60
31319J2	95	200	49.5	292	355	39	2400	3400	6.95
31318J2	90	190	46.5	264	315	36.5	2400	3400	5.90
31317J2	85	180	44.5	242	285	33.5	2600	3800	4.60
31316J1/QCL7C	80	170	42.5	260	265	32	3000	4000	4.05
31315J2/QCL7C	75	160	40	240	245	29	3200	4300	3.50
31314J2/QCL7C	70	150	38	216	220	27	3400	4500	2.95
31313J2/QCL7C	65	140	36	190	193	23.6	3600	4800	2.35
31312J2/QCL7C	60	130	33.5	166	166	20.4	3800	5300	1.90
31311J2/QCL7C	55	120	31.5	140	137	16.6	4300	5600	1.55
31310J2/QCL7C	50	110	29.25	122	120	14.3	4500	6000	1.20
31309J2/QCL7C	45	100	27.25	106	102	12.5	5000	6700	0.95
31308J2/QCL7C	40	90	25.25	85	81.5	9.5	5600	7500	0.72
31307J2/Q	35	80	22.75	71	67	7.8	6300	8500	0.52
31306J2/Q	30	72	20.75	55	50	5.7	7500	9500	0.39
31305J2	25	62	18.25	38	40	4.4	7500	11000	0.26

32000 Series

Bearing No.	Dimensions (mm)			Basic Load Rating (KN)		Pu	Rotation Speed (rpm)		Weight (Kg)
Bearing No.	di	D	B	Cr	Cor	Pu	Speed Grade	Speed Limit	Weight (Kg)
32064X	320	480	100	1540	3100	255	850	1100	64.0
32060X	300	460	100	1540	3000	250	900	1200	58.0
32056X	280	420	87	1210	2360	200	1000	1300	40.5
32052X	260	400	87	1170	2200	190	1100	1400	40.0
32048X	240	360	76	935	1800	160	1200	1600	27.5
32044X	220	340	76	897	1660	150	1300	1700	25.5
32040X	200	310	70	748	1370	127	1400	1900	19.5
32038X	190	290	64	660	1200	112	1500	2000	15.0
32036X	180	280	64	644	1160	110	1600	2200	14.5
32034X	170	260	57	512	915	90	1700	2200	10.5
32032X	160	240	51	429	780	78	1800	2400	7.75
32030X	150	225	48	369	655	65.5	2000	2600	6.35
32028X	140	210	45	330	585	58.5	2200	2800	5.25
32026X	130	200	45	314	540	55	2200	3000	4.95
32024X	120	180	38	242	415	44	2400	3400	3.25
32022X/Q	110	170	38	233	390	42.5	2600	3600	3.05
32021X/Q	105	160	35	201	335	37.5	2800	3800	2.40
32022X/Q	110	170	38	233	390	42.5	2600	3600	3.05
32021X/Q	105	160	35	201	335	37.5	2800	3800	2.40
32019X/Q	95	145	32	168	270	30.5	3200	4300	1.80
32018X/Q	90	140	32	168	270	31	3200	4300	1.75
32016X/Q	80	125	29	138	216	24.5	3600	5000	1.30
32015X/Q	75	115	25	122	163	18.6	4300	5300	0.90
32014X/Q	70	110	25	116	153	17.3	4500	5600	0.84
32012X/QCL7C	60	95	23	95	122	13.4	5300	6700	0.59
32010X/QCL7CVB026	50	80	20	69.5	88	9.65	6300	8000	0.37
3201OX/Q	50	80	20	69.5	88	9.65	6300	8000	0.37
33209/Q	45	85	32	108	143	16.3	5300	7500	0.82
32008XTN9/Q	40	68	19	60	71	7.65	7500	9500	0.27
32008X/Q	40	68	19	60	71	7.65	7500	9500	0.27
32008/38X/Q	38	68	19	60	71	7.65	7500	10000	0.28
320/32X/Q	32	58	17	42.5	46.5	4.8	9000	11000	0.19
32006X/Q	30	55	17	40.5	44	4.55	10000	12000	0.17
320/28X/Q	28	52	16	36.5	38	4	10000	13000	0.15
32005X/Q	25	47	15	31	32.5	3.25	12000	14000	0.11
320/22X	22	44	15	25.1	29	2.85	11000	15000	0.10
32004X/Q	20	42	15	28	27	2.7	13000	16000	0.097

Luoyang solarich machinery Co., Ltd. is a professional manufacturer of bearings, We can design and manufacture single-row ball slewing bearings, double-row ball slewing bearings, three-row roller slewing bearings, ball combination slewing bearings, crossed roller bearings, crossed tapered roller bearings Bearings, slewing drives and custom bearings.

Subordinate factories use high-quality chrome steel and stainless steel as raw materials, specializing in the design, development and manufacture of deep groove ball bearings, stainless steel bearings, stainless steel outer ball bearings , tapered bearings , cylindrical bearings, needle bearing , thrust bearing , bearing housing and non-standard bearings.

Adhering to the business philosophy of "Quality and Integrity", we will continue to provide excellent bearings and high-quality services to serve global customers.

With a professional team and advanced manufacturing technology, it is in a leading position in the research and development of slewing rings and customized bearings, with reasonable design structure, light weight, strong bearing capacity and strong versatility. Bearing diameters range from 200 to 15000mm, with accuracies covering P0, P6 and P5 grades. Our slewing rings, precision bearings and custom bearings are used in a wide range of industries including construction, engineering, mining, marine, chemical, wind turbines, medical equipment etc.

Playground Equipment

Slewing bearing can provide excellent performance experience and safety guarantee for amusement equipment, and the durability of slewing bearing is also the main concern of technical engineers. For more than 20 years, slewing bearing solutions have been used in many key applications of large amusement equipment. reflect.

We designed the cross-sectional area to remain the same as the raceway center distance increased, and the slewing ring achieves better dynamic capabilities with less mass.

Key advantages include:
* Lighter weight
* Save spaighter weightce
* Long life and lower maintenance costs
* Better stiffness
* Better lubrication in extreme conditions

Medical Device
With the comprehensive development of scientific and technological strength, the social economyu has been improved faster, and the medical equipment has also been comprehensively improved.

Mining & construction machinery

Mining machinery and heavy construction machinery industry uses a range of different types of highly specialized mobile machinery. . The places where mining machinery and construction machinery are active are mostly mining sites such as mountains and deserts that are far away from ordinary human life. These heavy machinery work in the harshest environments and require continuous low-friction work without reducing load capacity and minimum. assembly and adjustment time. Solving the bearing heating problem caused by the large exciting force, high vibration frequency and continuous operation of vibratory rollers for users has become the focus of the work. Mineral crushing machinery, cutting machinery, screening machinery, loading machinery, conveying machinery and other equipment in the use environment of bearings, users desire products with robustness, durability and high reliability to resist these harsh working conditions.

Transportation vehicle

Metric and inch needle roller bearings have various structural types, mainly including open drawn cup needle roller bearings, closed drawn cup needle roller bearings, needle roller bearings with inner ring and needle roller bearings without inner ring/without inner ring Cage needle roller bearings, caged and cageless needle roller bearings. Widely used in automobiles, motorcycles, mopeds, power tools, textiles, agricultural machinery, printing machinery, construction machinery, automatic instruments and other fields.

Automatic machinery

Industrial robot bearings mainly include two categories: one is thin-walled bearings, and the other is crossed cylindrical roller bearings. In addition, there are harmonic reducer bearings, linear roller bearings, spherical plain bearings, etc. Bearings with good performance have large bearing capacity, good rigidity, high rotation precision and easy installation.

Q: Are you trading company or manufacturer?
A: We are bearing manufacturer.

Q: How do you control quality of bearing?
A: All products and services passed ISO9001-2008 Quality Certificate.

Q: What is the MOQ?
A: It depends on the bearing type. You can send inquiry or send e-mail for more information.

Q: How about the package?
A: Industrial packing in general condition (Plastic tube+ carton+ pallet). Accept design package when OEM.

Q: How long is the delivery time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days., depends on the model and quantity.

Q: How about the shipping?
A: We can arrange the shipment or you may have the forwarder.

Q: Is sample avaiable?
A: Yes, sample order is acceptable.

Q: Can we use our own LOGO or design on bearings?
A: Yes. OEM is acceptable. We can design the bearing with your requirements and use your own LOGO and package design.