Description
Hot Runner-Face-fit Valve Gate
Feature:
Time cumsuming in installation.Pertential leakage between manifold and nozzle.Used for large size household appliances and high cavitation.
Product Terminology:
| No. | Name | No. | Name | No. | Name |
| 1 | Top Plate | 11 | Centre Locator | 21 | Valve Pin Seal |
| 2 | Manifold | 12 | Manifold Tubular Heater | 22 | Holder Block |
| 3 | Manifold Plate | 13 | Gate Seal | 23 | Pressure Disk |
| 4 | Dowel Pin | 14 | Insulation Cap | 24 | Connector |
| 5 | Spacer Plate | 15 | Protect Cover | 25 | Hydraulic Cylinder |
| 6 | A-Plate | 16 | Nozzle Heater | 26 | Pneumatic Cylinder |
| 7 | Gate Seal | 17 | Thermocouple | 27 | Locating Ring |
| 8 | Nozzle Tip | 18 | Holder Ring | 28 | Inlet Nozzle |
| 9 | Torpedo | 19 | Nozzle Shank | 29 | Thermocouple |
| 10 | Nozzle Locating Ring | 20 | Valve Pin | 30 | Support |
Product Series--Brass Heater Type:
| Item | Series |
| I-05 | I-08 | I-12 | I-16 | I-20 |
| ΦA | 8 | 12 | 16 | 22 | 25 |
| ΦB | 8 | 12 | 16 | 22 | 25 |
| Φg1 | 1.5-2.0 | 20.-2.5 | 2.0-3.0 | 3.5-6.0 | 5.0-7.0 |
| Φg2 | 1.2-1.5 | 1.5-2.5 | 1.5-3.0 | 2.0-3.5 | 3.0-4.0 |
| ΦD1 | 23 | 30 | 35 | 48 | 53 |
| ΦD2 | 32 | 37 | 42 | 56 | 65 |
| Φd | 5 | 8 | 12 | 16 | 20 |
| Φd1 | 5 | 8 | 12 | 16 | 20 |
| Φp | 3 | 3 | 5 | 8 | 10 |
| L | 56-156 | 56-356 | 62-622 | 82-722 | 82-802 |
| Xmin | 60(Air) | 60(Air) | 60(Air) | 75(Air) | 85(Air) |
| 55(Oil) | 55(Oil) | 55(Oil) | 70(Oil) | 70(Oil) |
| Ymin | 35 | 35 | 40 | 45 | 50 |
| K | ~ | 5 | 5 | 5 | 5 |
Shot weight for each product lines:| Product Series | I-05 | I-08 | I-12 | I-16 | I-20 |
| Approximate Shot weight per nozzle | <10g | 10-100g | 100-500g | 500-3000g | >3000g |
| The above data are for reference only. In addition to the shot weight,material properties,part size,shape,wall thickness and gate type all need to be considered,to choose the most suitable product series. |
Complaint
