Product Name | Carbon steel H beam |
Grade: | G350 S275JR S355JR,SS400,ASTM36,S235jr,S235jo, Q235B and Q345B etc. |
Size | 1.Web Width (H): 100-900mm 2.Flange Width (B): 100-300mm 3. Web Thickness (t1): 5-30mm 4. Flange Thickness (t2): 5-30mm Or Customers' requirements |
Delivery time: | 20 days after payment |
Advantages | 1. Lower cost with better quality. 2. High safety performance. 3. Easy to assemble and dismantle. 4. Manufacture under complete quality control system - ISO9001. 5. Installation with instruction of experienced engineers 6. Non-pollution. |
Surface treatment | Bare, black,galvanized,coated,painted or as your request |
Supply ablitity: | 10000 Metric Ton/Metric Tons per Month |
Trade terms | Ex-Work, FOB/CFR/CIF |
H-beam:
H-shaped steel is an economical cross-section high-efficiency section with more optimized cross-sectional area distribution and a more reasonable strength-to-weight ratio. It is named because its cross-section is the same as the English letter "H". Since all parts of the H-shaped steel are arranged at right angles, the H-shaped steel has the advantages of strong bending resistance in all directions, simple construction, cost saving and light structural weight, and has been widely used.
H-shaped steel is a widely used profile in steel structure buildings today, and it has many differences compared with I-shaped steel. The first is the flange, and second, the inner surface of the flange has no inclination, and the upper and lower surfaces are parallel. The cross-sectional properties of H-beams are significantly better than traditional I-beams, channel steels and angle steels.
The two outer and inner sides of the H-shaped steel have no slope and are straight. This makes the welding and splicing of H-beams easier than I-beams, and has better mechanical properties per unit weight, which can save a lot of materials and construction time. The section of the I-beam is well subjected to vertical pressure and resistant to tension, but the section size cannot resist torsion because the wing plate is too narrow. H steel is the opposite, both have their own advantages and disadvantages.
Our main items are:
1. Cold rolled steel/ galvanized steel/ galvalume steel/ prepainted steel/ corrugated steel
2. steel profiles, such as, steel angle section/ H beams/ I beams/ Channel section etc..
3. HRC MS plate, checkered steel plate, alloy steel plate /coil etc..
4. also the carbon steel/ galvanized steel round and square tubes, and stainless steel etc.