| The Specifications of electromagnetic flowmeter |
| Measuring fluid | conductive fluid |
| Caliber | DN10-DN3000 |
| Electrode materials | 316L,Mo2Ti HC HB Pt Ta Ti |
| Lining Material | PTFE, PFA (resistance to negative pressure), chloroprene rubber, polyurethane, hard rubber (optional conductive ground rubber ≥ DN125) |
| Electrode Type | Standard type 316L, scraper-type (DN ≥ 50) |
| Dielectric conductivity | > 5μs/cm (water> 20μs/cm) |
| Accuracy grade | ±0.5% RS. |
| Repeatability | ±0.1% |
| Flow Range | 0-10m/s |
| Maximum temperature of medium | A size ≤ 90 , min size ≤ 180 (rubber ≤ 65 ) |
| Temperature | -25 °c - 65°c |
| Working pressure | 1.0Mpa-4.0Mpa, the special supplier overpressure |
| Protection Level | IP65, IP67, IP68 (optional) |
| Output | 4-20mA current output ,0-1kHz frequency output, pulse output per unit volume |
| Power | 220VAC 110VAC |
| Standard | Q/SMAU2-2006 |
| Auxiliary converter | BF900C/F |
| Flange | National standard GB9115, ANSI, JIS |
| Installation Type | Split, integrated |
Complaint
