Peek Plastic Granules 150ca30 450ca30 Carbon Fibre Reinforced 30 Medical Grade Raw Materials

Min.Order: 10

Product origin: Guangzhou, Guangdong, China

Infringement complaint:

Complaint

US$ 16

Description

Prouduct Parameters

The Main Properties Of PEEK Raw Material

property	Item no.	Unit	PEEK-1000	PEEK-CA30	PEEK-GF30
1	Density	g/cm³	1.31	1.41	1.51
2	Water absorption(23ºC in air)	%	0.20	0.14	0.14
3	Tensile strength	MPa	110	130	90
4	Tensile strain at break	%	20	5	5
5	Compressive stress(at 2% nominal strain)	MPa	57	97	81
6	Charov impact strength(unnotched)	KJ/m²	No break	35	35
7	Charov impact strength(notched)	KJ/m²	3.5	4	4

8	Tensile modulus of elasticity	MPa	4400	7700	6300
9	Ball indentation hardness	N/mm²	230	325	270
10	Rockwell hardness	--	M105	M102	M99

PEEK Material Characteristics

1.Mechanical properties (variable stress and excellent fatigue resistance)
2.High temperature resistance (long-term use at 260ºC)
3.Self-lubricity (low coefficient of friction and wear resistance)
4.Chemical resistance (corrosion resistance)
5.Flame retardant (can reach the highest flame retardant standard)
6.Peeling resistance (can be made into thin coated or electromagnetic wire)
7.Fatigue resistance (resin material has the best fatigue resistance)
8.Hydrolysis resistance (excellent in high temperature and high pressure water)
9.Radiation resistance (up to 1100Mr AD)
NO.1 Mail samples
Customized samples, our engineers can make exactly the same products according to the samples you provide, measure the specifications and test the product materials.
NO.2 Provide Drawings
We support CAD drawings, PDF files, 3D formats for customization, such as STP, STEP, X-T, etc.Confidential handling of products according to your needs.
NO.3 Provide Photos
If there are only photos and no detailed drawings and samples, you can provide detailed size specifications of the product, and we can also help you process and produce the product.

Finished Product Display
We support customized screw, gears, bushings, valve seats, seal, special-shaped pieces of PEEK injection products, tolerance is not more than 0.03 mm.

We are a company that focuses on the research, manufacture, and sale of engineering and high-performance plastics. At the same time, we offer machined plastic components. If you have any problems or want to get the quoted price of any plastics or machined components, please feel free to contact us. Our engineers will reply to you as soon as possible.

Product Advantages
PEEK is a kind of heat-resistant, high performance thermoplastic special engineering plastics.It has good mechanical properties and chemical resistance, abrasion resistance, and hydrolysis resistance properties etc.; it has a light proportion and self-lubricating properties. Guandong Engineering Plastics Industries (Group) Company, has studied and applied this material in many industries for many years. Due to very good processing properties, it can be filled with carbon fiber and MoS2 etc. to improve lubrication performance and mechanical strength further.

Heat-resistance
PEEK has a higher glass transition temperature and melting point(334°C). It is one of the reasons that it can be a reliable application in the requirement ofthe heat.Its heat load variable-tem perature can be 316°C ,continuous use temperature is 260ºC.
Self-lubricating
PEEK has outstanding sliding characteristics in all plastics;it is suitable for stringent requirements for low coefficient of friction and resistance to friction used. Especially the self-lubricating properties of PEEK will be better if it is modified by carbon fiber and graphite mixed in the proportion of each of them.

Chemical Resistance
PEEK has excellent chemical resistance. In ordinary chemicals, it can be dissolved or damaged only by concentrated sulfuric acid; its corrosion resistance is similar to those of steel and nickel.
Hydrolysis Resistance
PEEK and its composites will not be affected chemically by water and high pressure steam. The products that are made from this material will maintain the outstanding characteristics in continuous use in high temperature and high pressure water

Besides, PEEK can be used to produce some exact medical equipments for the OPS and dentistry,which can annihilate bacterium and can be used time after time, the most important application of PEEK, which is used to produce the artificial bone instead of metal. The artificial bone, which is made of PEEK, has the good performance of light-weight, non-toxic and good-chemical-resistance and so on, and can integrate with the organism of human body. So PEEK is also successfully applied in medical industries.

Test Creatificate

Factory Tour

The plant covers an area of 10,000 square meters, and the production equipment includes Haas imported from the United States, CNC machining centers, wire cutting, spark machines, punching machines, injection molding machines, CNC engraving and milling machines, CNC gear hobbing machines, CNC lathes, CNC milling machines, grinding machines and other machinery equipment .

Our company is developing in the mode of quality for survival,brand for development and customer's demand,welcome new and old customers to visit our factory for guidance

Our Exhibition
The company has rich experience, strong strength and participated in many high-end exhibitions;Many partners from other countries are visiting.

Q1. We don't have drawings, can we produce according to the samples we provide?

A1. OK

Q2. How to customize plastic parts?

A2. Customized according to drawings

Q3. Can I make a sample for testing first?

A3. OK

Q4. How long is the proofing cycle?

A4. 2-5 days

Q5. What are your processing equipment?

A5. CNC machining center, CNC lathe, milling machine, engraving machine, injection molding machine, extruder, molding machine

Q6. What craftsmanship do you have for processing accessories?

A6. According to different products, different processes are used, such as machining, extrusion, injection molding, etc.

Q7. Can injection products be surface treated? What are the surface treatments?

A7. OK. Surface treatment: spray paint, silk screen, electroplating, etc.

Q8. Can you help assembling the product after it is made?

A8. OK

Q9. How much temperature can the plastic material withstand?

A9. Different plastic materials have different temperature resistance, the lowest temperature is -40ºC, and the highest temperature is 300ºC. We can recommend materials according to the working conditions of your company.

Q10. What certifications or qualifications does your company have?

A10. Our company's certificates are: ISO, Rohs, product patent certificates, etc.

Forward

Related products