Material | Ccutting Speed VC(m/min) | Feed Rate (fz/mm/U) | Coolant | ||
D 4~6 | D 7~11 | D 12~20 | |||
Al-Alloys Si<1% | 150--6000 | 0.02--0.15 | 0.02--0.20 | 0.04--0.3 | Emulsion,MQL |
Al-Alloys Si<12% | 150--4000 | 0.02--0.15 | 0.02--0.15 | 0.04--0.3 | Emulsion,MQL |
Al-Alloys Si>12% | 150--2000 | 0.02--0.15 | 0.02--0.15 | 0.04--0.3 | Emulsion,MQL |
Magnesium Alloys | 150--6000 | 0.02--0.15 | 0.02--0.15 | 0.04--0.3 | Emulsion,MQL |
Copper Alloys | 150--5000 | 0.02--0.15 | 0.02--0.15 | 0.04--0.3 | Emulsion,MQL |
Brass Alloys | 150--4000 | 0.02--0.15 | 0.02--0.15 | 0.04--0.3 | Emulsion,MQL |
Ti-Alloys | 50--400 | 0.02--0.15 | 0.02--0.15 | 0.04--0.3 | Emulsion,MQL |
Graphite | 150--3000 | 0.02--0.15 | 0.02--0.15 | 0.04--0.3 | Emulsion,MQL |
GFRP glass fibre composites | 150--3000 | 0.02--0.15 | 0.02--0.15 | 0.04--0.3 | Dry,Air pressure |
CFRP carbon fibre composites | 150--4000 | 150--3000 | 0.02--0.15 | 0.02--0.15 | Dry,Air pressure |
PTFE | 150--2000 | 0.02--0.15 | 0.02--0.15 | 0.04--0.3 | Dry,Air pressure |
Acrylic | 150--1800 | 0.02--0.15 | 0.02--0.15 | 0.04--0.3 | Emulsion,MQL |
Thermoplastics,Duroplastics | 150--1800 | 0.02--0.15 | 0.02--0.15 | 0.04--0.3 | Emulsion,MQL |
1: How to get your quotation in a short time?