Complaint
Initially, wood chip crusher machine was mainly used for the efficient removal of branches and green waste in areas such as parks and woodland, but as wood chip came to be regarded as an important natural resource, wood chipping has taken on a new, economic dimension.
Wood chip is valuable if the quality is consistent and meets designated requirements. Wood chippers ensure these requirements are met. Our entire product range is designed to deliver high quality wood chip and on many of our machines the knives can be adjusted to produce different sizes, depending on what the wood chip wi be used for.
Large quantities of wood chip are already being used as a fuel supply for energy and heating, and for industrial purposes such as MDF board and paper production. In addition, wood chip is extensively used as ground cover or as surfacing material for paths as an environment-friendly weed killer, which reduces or eliminates the need for chemical sprays.
Product introduction:
This type wood chipper shredder is driven by diesel enginer power. The wood chipper shredder can be towed by vehicles to worksites. It is convenient wood shredding equipment and for the recycling of tress branches after trimming.
| Model | Capacity | |
| EW-6130 | 25HP | 1-2 T/H |
| 32HP | ||
| 55HP | ||
| EW-6145 | 102HP | 3-5 T/H |
| Modle | 6130 |
| diesel engine drive | |
| Capacity | 1-2T/h |
| Size | L2300*W1300*H1800mm |
| Power | 25/32/55HP diesel engine |
| start method | electric start |
| Host speed | 2900r/min |
| Feeding roller diameter | 280mm |
| Feeding roller power | hydraulic motor |
| Knife roll diameter | 300mm |
| Number of blades | 3 moving knives, 1 static knife |
| Blade length | 300mm |
| battery specification | 12V |
| generator power | 800W |
| Diesel tank volume | 20L |
| Hydraulic oil tank volume | 25L |
| Feed stall | Forward-reverse-stop three-speed manual control |
| Feed size | 700*500mm |
| Feed throat size | 300*250mm |
| wheel | aluminum alloy wheels |
| tire size | 165/70r13 |
| Throttle adjustment method | Accelerator flameout integrated operating handle |
| Outlet direction | 360-degree quick adjustment device, height adjustment of discharge nozzle |
| other configuration | Tail light, feed light, collapsible hand jack, tow height adjustable |
1.Quality Warranty
You May Have Following Questions:
