Complaint
Product Selling Point
Even for large houses, a water heater is enough.
Level 1 energy efficiency,Compared with the traditional electric water heater, 75% savings in electricity bills
Low energy consumption, which is only 1/3 of gas water heater and 1/2 of the solar water heater.
Product Introduction:
This product is mainly suitable for apartment penthouse users.. The air-only source heating mode can reach 65ºC, while the highest water temperature can reach 75ºC. High temperature hot water capacity increasing and antibacterial effect can solve the pain point of health hot water quality. It can realize no cold water and no waste of hot water, open-hot.
Main features:
1. Level 1 energy efficiency, electricity saving 76%
Under standard working conditions, COP>4.2, compared with electric water heater, Each kw/h of electricity can produce more than four times the heat which equals electricity saving above 76%.
2. Library level silence 40dB
3. High efficient heat transfer, electricity and water separated
By using efficient cellular array structure and flexible fitting process, the heat exchange area is larger and the heat transfer effect is better; Moreover, the performance is more lasting, the system energy efficiency level can reach above 4.2. The heat exchanger is not in contact with the water in tank without any risks of corrosion, scaling or leakage, etc. The whole body adopts intelligent high pressure foaming, and the insulation layer is meticulous, uniform and tight, which greatly improves the heat preservation efficiency and delays the heat loss, as well as improves the energy efficiency of the system.
4. Higher water temperature, Larger amount of hot water
The heat pump heating mode can reach above 65ºC; The usage amount of hot water is 30% more than the ordinary model.
5. Special compressor, strong and more stable
Compressor special for heat pump, compared with the traditional air conditioning compressor, it has better wear resistance performance and a wider operating range. It can deal with the external environment changes and release lasting power.
6. Enamel water tank, more healthier water quality, longer service life, more stable performance
Enamel water tank features pressure resistance, fatigue resistance, long service life and no deformation after 280K times of pressure-bearing pulse test, far above China's national standard. Enamel has good adherence strength, acid resistance, alkali resistance, corrosion resistance and hot water corrosion resistance. The water quality is clean.
7. Large-screen touch control, intelligent and convenient
Technical Parameters:
| Model | KRS38A-160V | KRS38A-200V | KRS75B-300V |
| Weight(kg) | 102 | 114 | 129 |
| Product Dim.(mm) | 525*525*1735 | 525*525*1955 | 650*650*1950 |
| Packing size(mm) | 600*600*1830 | 600*600*2050 | 705*705*2010 |
| Rated capacity(L) | 160 | 200 | 300 |
| COP | 4.24 | 4.24 | 4.05 |
| Compressor | Professional heat pump compressor | ||
| Heat transfer mode | Micro-Channel Heat Exchanger | ||
| Refrigerant | R134a/870g | R134a/870g | R134a/870g |
| Noise(dB) | 40 | 40 | 48 |
| Rated max. water temp.(ºC) | 75 | 75 | 75 |
| Heating capacity(W) | 1780 | 1780 | 3300 |
| Hot water supply capacity(L/H) | 38 | 38 | 75 |
| Max Input(W) | 3200 | 3200 | 4000 |
| Heat pump rated power(W) | 420 | 420 | 815 |
| Rated power of electric heat pipe(W) | 2500 | 2500 | 2500 |
| Rated voltage and frequency | 220V~/50Hz | 220V~/50Hz | 220V~/50Hz |
| Rated water pressure(MPa) | 0.8 | 0.8 | 0.8 |
| Waterproofing grade | IPX4 | IPX4 | IPX4 |
| Max. suction/exhaust working pressure(MPa) | 0.7/2.6 | 0.7/2.6 | 0.7/2.6 |
| Allowable working pressure on low/high pressure side(MPa) | 0.7/2.6 | 0.7/2.6 | 0.7/2.6 |
| Max. working pressure of heat exchanger(MPa) | 2.6 | 2.6 | 2.6 |
