High Strength Ceramic Prefabricated Composite Plate for Construction

Min.Order: 300
Product origin: Xiamen, Fujian, China
Infringement complaint: complaintComplaint
US$ 9.9 ~ 16.78

Description

 High strength ceramic prefabricated composite plate for construction
EPS Cement Sandwich Panels Introduction
 

 ZJT ceramic prefabricated composite plate is used to embed strong electric box, weak electric box, thread pipe and other components needed for interior decoration into the wall in the process of producing silicate lightweight composite sandwich wall board.
Products have solid, light, thin body, high strength, impact resistance, strong hanging force, heat insulation, sound insulation, fire prevention, waterproof, easy to cut, without approval of swing, dry operation, environmental protection and other wall materials can not


 

Product Application                    

widely used:

1. residential building,school,hospital,prefab house,office,

hotel,public construction,entertainment place.
 

2. wall/exterior wall/interior wall/super high wall/abnormity wall,

roof,floor,pipe,fire well,equipment partiton



                 



 

 

Product Parameter                                    

 Product Specification

LengthWidthThickness
 
 
2270mm
2440mm
 
 
610mm
60mm
75mm
90mm
100mm
120mm
150mm


Technical Index 

 ItemTesting Indexes
 Model (Thinkness/mm)60mm75mm90mm120mm150mm
1Anti-impact Capacity
[Standard sandbags/times]
≥5≥5≥5≥5≥5
2Anti-bending Damage Load 
[times over deadweight]
≥3.0≥3.0≥3.0≥5.0≥5.0
3Compressive Stregth [Mpa]≥3.5≥3.5≥3.5≥3.5≥3.5
4Softening Coefficient≥0.8≥0.8≥0.8≥0.8≥0.8
5Surface Density [kg/]≤70≤70≤90≤110≤110
6Moisture Rate [%]≤10≤10≤10≤8≤8
7Drying Shrinkage Value [mm/m]≤0.5≤0.5≤0.5≤0.5≤0.5
8Hang Force [N]≥1000≥1000≥1000≥1000≥1000
9Sound Insulation Capacity In the Air[dB]≥35≥35≥40≥45≥50
10Fire Endurance [H]≥1.5≥1.5≥2.5≥3.0≥4.5
11Heat Transfer Coefficient [W/m2.k]≤2.0≤2.0≤2.0≤2.0≤2.0
12Inner Radiation Index≤1≤1≤1≤1≤1
13Outer Radiation Index≤1≤1≤1≤1≤1


Loading Information

Items(mm)Single(piece)Load by 20'GPLoad by 40'GP
Kg/pcsKg/m2Qty(pcs)m2TonsQty(pcs)m2Tons
2270×610×600.0847343134331552572726
2270×610×750.1067482523491736450426
2270×610×900.1277562072871632244626
2270×610×1000.1487631892621828038826
2270×610×1200.1798711622241625234926
2270×610×1500.211471061261741814720426
 
2440×610×600.0960402403571542062526
2440×610×750.1180542043041730845826
2440×610×900.1390601682501633650026
2440×610×1000.15100671442141524035726
2440×610×1200.18110741081611221632126
2440×610×1500.22160107781161615623226

 

How to install 

  1. Set line:set line and carry panel in position.
  2. Saw panel:use hand-hold eletrict saw to cut freely.
  3. Sizing:sizing cement on tenon side of two panels then spread ploymer mortar on one tenon.
  4. Installation:carry panel prepared to be installed panel.
  5. Plant bar in wall and pillar:dry one hold in the original pillar or wall and fix panel by one steel bar.
  6. Corret and fix:use one guiding ruler to check and level correction.
  7. Plant bar in structure beam:drill one hole in structure beam and plant one reversed 7 type shaped steel bar to fix with wall panel.
  8. Plant bar in floor:dirll one hole in floor and panlt 7 types shaped steel bar to fix with wall panel.
  9. Plant bar between wall panel:plant one 200mm length steel bar in the angle or 45 degree to fix between two panels.
  10. Install electric wire and switch:set lines on the place required to be settled with concealed wire and switch box.
  11. Grout and fill slurry:fill and handle corrected wall panel with ploymer mortar.
  12. Scrapping ash and sticking anti-crack cloth,coating:stick anti-crack cloth and brush coating after grouting slurry.




About Us                                                  

In the trend of low-carbon and energy-saving in domestic, ZJT is on a mission environmental protection, and actively promoting the development and popularization of green building materials. The composition of the materials of ZJT energy-saving wall panel strictly implements national GB6566-2001Building Materials Radionuclide Limited standard, which belong to the main of the radioactive building materials and a kind of decoration materials, 100% do not contain harmful substances in humans, and in high temperature combustion state, the release of excessive part also can be operated in an efficient range so it has no direct threat to human. 

 



Production area:  40,000m2

Stacking area: 60,000m2

Production capacity: 2,000,000m2 per year

Export quantity: over 600 containers per month

Customers' satisfication will be the best compliment for us!

 



Our capabilities speak for us!

 
 

 You can always truth us!

 

 

FAQ  

1. Q:How about your packing?

  A:Free packing: we use normal pallet and packing belt for panels.

  • Standard exporting packing:good pallet,pearl wool,corner protective paper,packing belt,plastic thin film. 
  • Packing size: 2270/2440*610*(60-150)mm 

2. Q:How about your loading?

  A:Our loading is normally 18 pallets per 20' container or according to clients'  requirements.

3. Q:What is your MOQ?

  A:A 20 feet container.

4. Q:How about your time of delivery?

  A:It's about 15 days after receiving deposit.

5. Q:How can we get samples.

  A:Our samples are free for your reference,you just need to pay for the freight.

6. Q:How about the payment terms?

  A:30% T/T in advance T/T balance before delivery.


Contact Information   



 

Product Tag:
Related categories:
Scroll to Top