Description
The product is a kind of reinforced self-adhesive waterproof membrane, made of long fiber polyester felt, self-adhesive polymer modified asphalt as dip coating material, polyethylene film, fine sand or isolation material as surface material, and silicone oil anti-adhesive as isolation layer.
| Thickness | 2.0mm / 3.0mm / 4.0mm |
| Length | 10m |
| Width | 1m |
| Certificate | ISO9001/14001/45001 |
Physical Property
Applicable Range
- Roof, basement, interior, tunnel, subway and municipal works of industrial and civil buildings.
- Special structure roofing, such as wooden roof.
- Oil depot, chemical factory, textile factory and other waterproof works that are not suitable for open fire construction.
Construction Method
- Adhesion method:
On the dry, flat and dust-free base layer, first brush the base treatment agent. After drying, remove the isolation film from the self-adhesive surface of the coil, and then bond directly with the substrate.- Construction Points: Substrate should be evenly coated with the base treatment agent, and the coiled material shall be timely paved after drying. Tear off the bottom isolation material when paving the membrane. Air under the coiled material shall be exhausted and firmly bonded by rolling. Waterproof membrane shall be flat and straight, and the lap size shall be accurate.- Notes: Do not pave membrane in rainy, snowy or windy weather. During construction, it is necessary to ensure the cleanliness of surface at the overlap. When construction at low temperature, hot air should be used to assist the construction of the overlapping part. Pay attention to the protection of finished products, temporary protection measures should be set on coils for self-adhesive materials.Packaging & Shipping
| Port: | Tianjin Xingang Port |
| Shipping: | Support Sea freight |
Complaint
