Hot Selling Passive Fixed Four Channel Reader/ Four Ports UHF RFID Reader

Min.Order: 1

Product origin: Jinan, Shandong, China

Infringement complaint:

Complaint

US$ 400 ~ 500

Description

UHF Four Port Reader
(Impinj R2000 Chip)

Model Number: ST-8604
General Descriptions
ST-8604 is high performance UHF Long range RFID Reader integrated with Impinj R2000 module with excellent reading performance. The reading distance up to 10 meters. It supports fast tag read/write with high identification rate. The reader is widely used in RFID system such as logistics, vehicle access control, and anti-counterfeit and industrial production process control system.

Technical Specifications

Integrated Impinj R2000 reading module
Protocol: ISO18000-6B, ISO18000-6C(EPC C1G2)
Work Frequency :865~868MHz, 902~928MHz frequency band(EU&US standard or customization);
FHSS or Fix Frequency transmission;
RF output power 30dbm in Max (adjustable);
Built-in 8dBi antenna with effect distance up to 10m;
Power supply: DC +9V-24V
Communication: RS232/RS485/Wiegand26/TCP/IP
Size: 305*305*70mm
Free SDK and demo software is provided

PS: Effective distance depends on protocol, tag and environment.

Absolute Maximum Rating

ITEM	SYMBOL	VALUE	UNIT
Power Supply	VCC	16	V
Operating Temp.	TOPR	-10~+60	ºC
Storage Temp.	TSTR	-20~+75	ºC

Electrical and Mechanical Specification
Under TA=25ºC,VCC=+9V unless specified

ITEM	SYMBOL	MIN	TYP	MAX	UNIT
Power Supply	VCC	8	9	12	V
Current Dissipation	IC		800	1500	mA
Frequency	FREQ	902	902~928	928	MHz
Size	Size		310×210×41		mm

MECHANICAL DATA(UNIT mm):

INTERFACE

1.Power J1

No.	Symbol	Comment
2	PWR	+9VDC
4	GND	Ground
1,3	NC	Reserved

2.WiFi Antenna J2 (SMA Female)
3. USB J3 (Slave)
4. USB J4 (Reserved)
5. CPIP RJ45 Socket J5
6. UART J6 (RS232 DB9 Female)

No.	Symbol	Comment
1	NC	Reserved
2	TXD	Data output in RS232
3	RXD	Data input in RS232
4	NC	Reserved
5	GND	Ground
6	NC	Reserved
7	NC	Reserved
8	NC	Reserved
9	NC	Reserved

7. GPIO J7 (DB15 Female)

No.	Symbol	Comment
1	Output1	General output1
2	Output2	General output2
3	Output3	General output3
4	Output4	General output4
5	Input1	General Intput1 with Internal 47k resistor pulled-down to ground
6	Input2	General Intput2 with Internal 47k resistor pulled-down to ground
7	Input3	General Intput3 with Internal 47k resistor pulled-down to ground
8	Input4	General Intput4 with Internal 47k resistor pulled-down to ground
9	TGIN	Trigger input with internal 10k resistor pulled-up to +5V
10	R+	R+ in RS485
11	R-	R- in RS485
12	GND	Ground
13	NC	Normal-Close terminal of internal relay
14	NO	Normal-Open terminal of internal relay
15	CM	Common terminal of internal relay

8.TNC Antenna Port1~Port4 J8~J11

9.LED indicator

Symbol	Comment
POWER	Power on indicator
RUN	Command-executing indicator
TAG	Tag-detected indicator
WIRELESS	WiFi active indicator
ALARM	Alarm indicator
1~9	RSSI indicator