Water Make-up Units for Power Plants Condensers

Min.Order: 1

Product origin: Lianyungang, Jiangsu, China

Infringement complaint:

Complaint

US$ 580000

Description

Water make-up units for power plants Condensers

I,Definition

1.Condenser is a kind of heat exchanger that condenses steam turbine exhaust into water, also known as rehydrator. Condensers are mainly used in power units of steam turbine , and are divided into water-cooled condensers and air-cooled condensers.

2.The condenser can not only condense the steam turbine exhaust into water for the boiler to reuse, but also establish and maintain vacuum at the steam turbine exhaust.

II,Classification of Steam Condensation Methods

1.surface
In the surface condenser, the steam separated from the cooling medium is condensed into liquid on the cooling wall (usually metal pipe). The cooling medium can be water or air.

2.mixing
In the hybrid condenser, steam is condensed into liquid when mixed with cooling medium. The condensed steam can be either water vapor or vapor of other substances.

III,How to clean?

1.Isolate the equipment system, and discharge the water inside the condenser.

2.Use high-pressure water to clean the sludge, algae and other impurities in the pipeline, and then close the system.

3.Install a ball valve between the isolation valve and the exchanger, and both the inlet and outlet should be installed.

4.Connect the delivery pump and connecting pipe, so that the cleaning agent is pumped in from the bottom of the condenser and flows out from the top.

5.Start pumping the required cleaning agent into the condenser.

6.Repeated cleaning to the recommended cleaning time, with the progress of the cycle and the dissolution of sediment, the gas generated during the reaction will also increase, and the excess air should be discharged through the vent valve at any time.

7.With the discharge of air, the space in the condenser will increase. Appropriate water can be added. Do not inject a large amount of water at the beginning, which may cause water overflow.

Air-cooled condenser Technical data sheet

Specification	Brass	Heat exchange area (m²)	Heat Discharge Volume (W)	Dimensions Length X Width X Height (mm)	Fans				Motor Electricity (V)
Specification	Brass	Heat exchange area (m²)	Heat Discharge Volume (W)	Dimensions Length X Width X Height (mm)	Quantity (units)	Fans Diameter (mm)	Air volume (m²/ h)	Motor Power (W)	Motor Electricity (V)
1/4 small	2*4	1	360	17545210	1	150	300	75	220
1/4 medium	2*4	1.1	370	19545210	1	150	300	75	220
1/4 large	2*4	1.2	380	20545210	1	150	300	75	220
1/4(80 pieces)	2*4	1.3	380	22545210	1	200	500	75	220
3/8	3*4	3.4	800	250135230	1	250	800	75	220
1/2	3*5	4.4	1000	320135280	1	300	1250	75	220
3/4	3*6	5.4	1150	365180340	1	300	1250	75	220
1HP	3*6	8.4	1600	460180340	1	300	1250	75	220
1.5HP small	4*6	9.8	1850	385160300	1	300	1800	75	220
1.5HP large	3*8	11.3	2500	440170425	1	350	1800	120	220
2HP	4*8	13	3000	440170430	1	350	1800	120	220
2.5HP	4*9	16.5	4400	460180460	1	350	1800	120	220
3HP	4*10	20	5500	510180530	1	400	3000	120	220
3HP large	5*10	22	6500	510200530	1	400	3000	2*120	380
3HP double air outlet	4*8	26	7500	820180440	2	400	2*1800	2*120	380
4HP double air outlet	3*11	30.0	8800	960200610	2	400	2*3000	2*120	380
5HP small twin air	4*11	42	10800	980200590	2	400	2*3000	2*120	380
5HP large twin air	5*13	50	14000	950200520	2	400	2*3000	2*120	380
6.5HP twin air	5*14	53	15200	980200600	2	400	2*3000	2*120	380
7.5HP twin wind	5*12	63.0	19000	960200600	2	400	2*3000	2*120	380
8.5HP twin wind	6*12	70	22000	960220630	2	400	2*3000	2*120	380
10HP Four Winds	5*20	88	24200	9602001030	4	400	4*3000	4*120	380
15HP Four Winds	5*20	130	36000	11802001030	4	400	4*3000	4*120	380
20HP Four Winds	5*24	150.0	42000	11402001230	4	400	4*3000	4*120	380

Lianyungang Jiusheng Electric Power Auxiliary Machinery Co., Ltd.

a national high-tech enterprise, is located at the foot of Jinping Mountain and beside the Qiangwei River. The factory is located in Lianyungang City, Jiangsu Province, the intersection of the the Belt and Road, and the east bridgehead of the Eurasian Continental Bridge.

It is adjacent to the 5A scenic spot of Huaguo Mountain and Liu Zhizhou Sports Park.

It is 5 kilometers away from the entrance and exit of the expressway, 13 kilometers away from the airport, and 36 kilometers away from the port.

It has convenient transportation by land, sea and air.

The company was founded in 2012 with a registered capital of 51 million yuan and an area of 20,000 square meters. It has 6 standardized industrial plants, supporting office areas, living quarters and finished goods yards, with a building area of about 11,000 square meters.

Jiusheng Company has honed a sword for ten years, casting the soul of the enterprise with the spirit of craftsman.

Under the careful creation of Chairman Xie Qizhi, it has grown into a well-known enterprise in the domestic power auxiliary machinery industry.

It integrates the design, production and sales of electric auxiliary machinery, pressure vessels, chemical equipment and pipeline engineering installation services.

It has the qualification of designing & manufacturing
D1 and D2 level pressure vessel , and the qualificaton of GB2 and GC2 pipeline engineering installation.
It passedISO9001 international quality system,ISO14001 environmental health management system, ISO45001 occupational health management system certification in the industry, and also owns Madrid international trademark and product import and export qualification.

It has certain manufacturing experience in American standard and European standard pressure vessels and other products and has been recognized as a qualified supplier by more than 10 central enterprises in the industry, including CNNC, Sinopec, PetroChina, Huadian, Huaneng, China Resources, China Railway, China Energy Construction, China Power Construction, Guoneng, Everbright, etc.

Forward

Related products