Complaint
| TDS OF LC301A-002 | |||
| Name of indicators | Unit | Value | Test Method |
| Relative density | g/cm 3 | 1.73-1.79 | ASTM D792 |
| Melt flow rate | g/10min | customizable | ASTM D1238 |
| Melting point | ºC | 265±5 | GB/T 16582 |
| Tensile strength | MPa | ≥25 | ASTM D638 |
| Elongation at break | % | ≥200 | ASTM D638 |
| Hardeness | Shore hardness | 60 | ASTM D2240 |
| Yield strength | MPa | - | - |
| Dynamic friction coefficient | - | 0.4 | GB/T 10006 |
| Maximal Temperature of Continuous Work | ºC | 180 | - |
| Heat distortion temperature | ºC(1.82MPa) | 74 | GB/T 19466 |
| Thermal expansion Coefficient | (-10 -5 /ºC) | 9-9.3 | ASTM D696 |
| Volume resistivity | Ω.cm | 10 17 | ASTM D257 |
| Insulation breakdown Voltage | KV(3.2mm) | 16 | ASTM D149 |
| Relative dielectric Constant | 10 3Hz | 2.4-2.6 | ASTM D150 |
| Dielectric loss angle tangent | 10 6Hz | <0.005 | ASTM D150 |
| Note: The above data is the representative value of our self -test, which is not applicable to the only basis for formulating specifications or as designed. | |||
1. Polytetrafluoroetylene(PTFE): two series of dispersion resin and suspension resin.
2. Fluorinated ethylene propylene(FEP): insulation series, sheath series, transparent
series and high strength series.
3. Polyfluoroalkoxy (PFA) : injection molding, extrusion, molding three series.
4. Polyvinylidene fluoride (PVDF): There are three series of injection molding, extrusion and molding.
5. Ethylene tetra fluoro ethylene(ETFE): three series of injection molding, extrusion
and molding.
6. Polyether ether ketone (PEEK): four series of multifunctional composite, carbon
fiber, pure resin, and glass fiber.
7. Color masterbatch: fluororesin master batches in 10 common colors of black, white, blue, brown, red, yellow, green, gray, orange and purple are provided. We can also customize color master batches for customers to meet market and customer needs.
1. Are youtrading company or Manufacturer ?
We are factory.
2.About Sample
We provide samples, but you need to pay the sample fee and freight.
3. About Material
We can customize the material according to customers' requirement.
4. About Quality
All the products must be tested strictly according to the testing procedure before shipment.
5. About Delivery Period
Normally delivered in 7 working days after the confirmation of order& payment. And it varies according to the material and
quantity.
6. About Payment term
It's flexible, T/T, L/C at sight,100% in advance,30% in advance, the balance by copy B/L
