Complaint
MT series laser cleaning machine has advanced technology, humanized design, small size, flexible operation, low energy consumption, environmental protection and other characteristics, with a certain degree of practicality and operability. The customer can preset the cleaning mode through the software, and can directly switch the node for operation without adjusting the parameters, and start the cleaning without chemical reagent medium, dust and water. Through auto focusing , surface fitting cleaning , removing resin, stain, rust, coating, paint, etc, the cleaning is high.
| Model | MT-CL100 | MT-CL200 |
| Laser Power | 100W | 200W |
| Laser Type | Pulsed | |
| Wavelength | 1070nm | |
| Frequency Range | 1-3000KHz | |
| Pulse Width | 10-500ns | |
| Scan Line Speed | <20m/s | |
| Cleaning Head Weight | <1.2Kg(No Isolator ) | |
| Armor Cable Length | 5M | |
| Cleaning Width | Single Axis: 0-120mm (Adjustable) Dual Axis: >100mm (Six Cleaning Modes) | |
| Voltage | AC 110/220V, 50/60Hz, 20A | |
| Cooling Method | Air Cooling | |
| Beam Quality | <2m2 | <5m2 |
| Single Pulse Energy | 2mJ | 5mJ |
| Cleaning Efficiency Comparison | ||
| Clean Paint/Rust /(20μm)) | 4.0m2/h | 8.0m2/h |
| Clean Oil /(20um) | 4.5m2/h | 9.0m2/h |
| Clean Titanium/Stainless Steel Oxides(100μm) | 4.0m2/h | 8.0m2/h |
| Clean Aluminum Alloy Oxide Film | 3.0m2/h | 6.0m2/h |
Dongguan Mactron Technology Co., Ltd (Short For: MACTRON ) was formerly known as Mactron Technology (Hong Kong) Co., Limited., with two brands: MACTRON and LYUSTEC, specializing in developing, manufacturing and selling of industrial laser equipment system and customized automation devices. At present, it has developed into a global laser intelligent equipment service provider integrating laser equipment, precision machinery, software engineering and modern management.
Q: When I got this machine, but I don't know how to use it. What should I do?
A: We provide a complete industrial laser equipment service package (including: hardware instructions, software operation manuals, operation videos, technical parameters, daily maintenance, etc.)
