| MODEL | 60KW | 120KW | 180KW |
| INPUT |
| Nominal Input Voltage | 380 VAC ± 15% |
| Acceptable Input Voltage Range | 3-phase, 3ph + N + PE |
| Working Voltage Range | 50 - 60 Hz |
| Maximum Input Current | 100A | 260A | 300A |
| Frequency Range | <= 5% |
| Input Power Factor | > 0.99 @nominal voltage (100% load) |
| OUTPUT |
| Output Current Range (based on 2-output) | 2 ~ 200A | 2 ~ 250 A | 2 ~ 250 A |
| Output Voltage Range | 200~750VDC (600~750VDC in constant power mode) |
| Power Module | 30kW x 2 pcs | 30kW x 4 pcs | 30kW x6 pcs |
| Efficiency | > 94% |
| Module Output Current Unbalancce | < 5% |
| Module Output Voltage Ripple | < 0.5 |
| Module Output Voltage Precision | < 0.5% |
| MModule Output Current Precision | < 1% |
| Connector Single Mode (max.) | CCS2 (60kW) ChAdeMO (50kW) | CCS2 (120kW) | CCS2 (180kW) ChAdeMO (50kW) |
| ChAdeMO (50kW) |
| Connector Double Mode (max.) | CCS2 (30kW) ChAdeMO (50kW) | CCS2 (60kW) | CCS2 (90kW) |
| ChAdeMO (50kW) | ChAdeMO (50kW) |
| Power Distribution | Single plug mode / Average output mode |
| PROTECTION |
| Charger Safety Protection | Over/Under voltage, overload, output power limit function, short circuit, anti-access, earth leakage, lightning and overheat |
| protection |
| Interface Safety Portection | Circuit discharge function, insulation monitoring device (IMD) and battery reverse parity protection |
| USER INTERFACE |
| Status Indiators | Power on, charging and fault |
| Communication Protocol | OCPP 1.6 |
| Connection Communication Mode | In accordance with DIN 70121 and ISO 15118 standard |
| Connection Standard | CCS2 (IEC61851-23) and CHAdeMO 1.0 |
| ENVIRONMENT |
| Operating Temperature | -25°C to 50°C |
| Humidity | 0 - 95% (non-condensing) |
| Altitude | < 2000m |
| Noise Level | <65dB |
| PHYSICAL |
| IP Protection | IP54 |
| Cable Length | 5m |
| Dimension, D x W x H (mm) | 750 x 530 x 1685, excluding plug and cable |
| Net Weight (kgs) | 275 | 310 | 328 |
Complaint
