Complaint
Heat dissipation system
The heat dissipation system uses a large-capacity tube-and-belt radiator and an optimized heat dissipation channel to further improve the heat dissipation capability of the vehicle and ensure reliable operation of the engine.
Hydraulic system
The hydraulic system adopts Shimadzu multi-way valve and gear pump, and the combination of soft and hard pipes can greatly reduce the oil pressure and improve the lifting and tilting of the gantry. The hydraulic cylinder uses Japanese "NOK" seals and has undergone tens of thousands of fatigue tests. It can better ensure the sealing performance and make the whole vehicle safer, more stable and more reliable.
Transmission system
The transmission system is equipped with brands such as Zhongnan and Shaodong Transmission, which are equipped with Japanese technology. The drive axle is equipped with brands such as Anqing Axle and Brilliance Machinery. The performance is mature and the quality is reliable.
Electrical System
The electrical system adopts the latest technology of harness and waterproof connector, multi-pass fuse arrangement to ensure the safety and stability of the circuit system, the entire circuit system integrated board design, easy to repair and maintain.
Door frame
Door frame design, high operating sensitivity and smooth start, flexible steering and small turning radius, ensuring controllable, flexible, lightweight and efficient operation of the whole machine; lifting cylinder with buffer device, piping system setting safety setting Even if the pipeline breaks, it will not cause the gantry or cargo to run out of control. Safety indicators are checked before leaving the factory to ensure the safety of the whole machine.
BROAD VIEW MAST DESIGN
| Model | FD15 | FD20 | FD25 | |
| Rated lifting load | kg | 1500 | 2000 | 2500 |
| Load center distance | mm | 500 | ||
| Free lifting height | mm | 100 | 1500 | |
| overall length ( With fork/Without fork ) | mm | 3180/2260 | 3422/2502 | 3646/3576 |
| Width | mm | 1090 | 1170 | |
| Overhead guard height | mm | 2050 | 2070 | |
| Wheelbase | mm | 1400 | 1600 | |
| Minimum ground clearance | mm | 110 | ||
| Mast tilt angle (front/rear) | % | 6°/12° | ||
| Tire no. (before) | 6.5-10-10PR | 7.00x12-12PR | ||
| Tire no. (after) | 5.00-8-10PR | 6.00x9-10PR | ||
| Minimum turning radius (outer side) | mm | 1950 | 2170 | 2240 |
| Minimum right angle aisle width | mm | 3630 | 3900 | 3970 |
| Fork size | mm | 920x100x35 | 1070X100X45 | |
| maximum working speed(Full-load/No-load ) | km/h | 14/15 | 17/19 | |
| maximum lifting speed(Full-load/No-load ) | mm/s | 500/480 | 530/550 | |
| maximum gradeability(Full-load/No-load ) | % | 20/21 | ||
| Forklift weight | kg | 2900 | 3320 | 3680 |
| Engine model | Quanchai/B02-082 | Quanchai4C2-50V32( Three stages)/ Quanchai4C2-50C41 or XINCHAI engine,S4S,4JG2 | ||
