Low MOQ OEM Food Grade Mineral Oil for Wooden Furniture

Min.Order: 2,000
Product origin: Maoming, Guangdong, China
Infringement complaint: complaintComplaint
US$ 2.1 ~ 2.5

Description

Product Description

 


High-quality ZMPC mineral oil, with the advantages of food grade and USP grade, is suitable for cutting boards, counters, counter tops, and imitation cutting board surfaces! Preserve the wood to extend its life and restore the  beauty of cutting boards,counters, tableware and imitation cutting boards.

Our Advantages

 

Production visualization, 24-hour progress follow-up, free videos andpictures, customized logo for 1 piece, free box design or multiple pack-aging, spot supply, etc.
 
 

Product advantages

Specially refined, highest quality
1.Colorless and tasteless 
2.Restore and protect wood 
3.Clean and maintain the knife 
4.Food and USP grade
5. Non-GMO

Product applications

1. Treat wooden cutting boards and cutlery
2. Remove oil and latex paint from the skin
3. Lubricate food processing equipment
4. Clean the stainless steel surface
5. Remove the sticker from the surface
6. Antifreeze tools
7. Moisturizer

Instructions

1. Wash the board with warm water and mild soap and dry thoroughly.

 
2. Apply the oil directly on the surface of the board.
 
3. Use the product in large quantities when using it, especially when the wood is dry or the cutting board or chopping board is new, and the surface of the oiled object should be wet.
 
4. We recommend using a small towel or a new paint brush to apply oil (try not to be soaked by oil), because direct contact with the oil may cause accidental damage.
 
5. Let the oil soak on the cutting board as long as possible; at least a few hours, preferably overnight.
 
6. After the above steps are completed, let the cutting board lean on the wire rack or stand upright to dry.
 
7. If you want to restore the old cutting board or adjust a new cutting board, hope that this process may be repeated to ensure that the cutting board is fully adjusted. We recommend that you oil it every month or when the cutting board is dry.

Detailed Photos

 


 
Certifications
 
 
 

About ZMPC

 

 
 
 
 
Product packaging

 
 
Points for attention
1. In the process of transportation, storage and transportation, pipelines, containers and pumps shall be specially applied. No fireworks shall be used in the storage and transportation site;
2. Copper tools shall be used for loading and unloading. When pumping oil or pouring cans, the oil tank and the live pipe must be grounded with conductive metal wire;
3. Please keep the ground clean, so that oil leakage can be dealt with in a timely manner, and no flammable items can be placed around;
4. Transportation and storage of the product must comply with SH0164 "Petroleum Products Packaging, Storage and Delivery Acceptance Rules";
5. Inflammable special oil or chemical solvent should be separated and stored, and the marks of inflammable goods should be placed.
 
 
Purchase Guide
 
 
Purchase Guide
1.Since all products sold by our company are chemicals, please read the product description on the product details page or consult customer service before purchasing to ensure that you can use the products you have purchased correctly. Due to improper product selection will not be accepted. (special note: the products in this store contain dangerous chemicals, please be careful to buy)
 
2.Please carefully check the storage conditions and other safety technical instructions before purchase. Zhengmao petrochemical will not be responsible for any loss or damage caused by improper use of the products or the storage conditions do not conform to the product instructions.
 
3.The company only shows some products, if you need other products, please contact customer service online.
 

 

Product Consultation
For consultation on relevant products, please communicate with customer service personnel through the phone number announced by alibaba or our store. 
 
Hours of service : Monday to Friday (8:00-20:00)East eight area
Due to the global time difference, non-working hours, weekends and statutory holidays may not be timely reply, you can leave a message, we will reply you within 24 hours!
  
 
FAQ
 
#Q1:Can I get some samples?
Yes, we can supply the free sample, but the shipping cost be paid by customers.
 
#Q2:How to start orders or make payments? 
Proforma invoice will be sent first after confirmation of order,enclosed our bank information. 
Payment term:Alibaba Tradeassurance,T/T, Western Union,L/C at sight.
#Q3:What's your MOQ? 
Our MOQ is 500 bottles, but the MOQ of individual products needs to consult customer service.
#Q4:How about delivery leadtime? 
Delivery lead time: About 5-7 days after payment confirmed(Chinese holiday not included)
#Q5:Is there a discount? 
Different quantity has different discount.
#Q6:How to confirm the Product Quality before placing orders? 
You can get free samples for some products,you only need to pay the
shipping cost or arrange a courier to us and take the samples. (Individual products cannot provide samples to provide measured indicators)
 
 
Scroll to Top