Complaint
Universal high-performance lubricant.
Benefits for your application:
Application:
MICROLUBE GB 0 was especially developed for friction points subject to high loads and mixed friction conditions. It is a universal grease suitable for the lubrication of eccentric presses (e.g. make Müller-Weingarten), heavy-duty spur and bevel gears with steel/steel components (e.g. gear motors that are not oiltight), slideways, guides and sump lubricated rolling bearings.
Application notes:
MICROLUBE GB 0 is applied by brush, spatula, grease gun or centralized lubrication system. Immersion lubrication of gears is possible up to a peripheral speed of approx. 3 m/s or via forcedfeed lubrication.
Product data:
| Article number | 020232 |
| Texture | homogeneous |
| Color space | red |
| Appearance | transparent |
| Density at 20 °C | approx. 0.90 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 355 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 385 x 0.1 mm |
| Base oil viscosity at 40 °C, calculated value | approx. 590 mm²/s |
| Base oil viscosity at 100 °C, calculated value | approx. 31.5 mm²/s |
| Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer | approx. 3 000 mPas |
| Drop point, DIN ISO 2176, IP 396 | > 180 °C |
| Flow pressure of lubricating greases, DIN 51805, test temperature: -25 °C | < 1 400 mbar |
| FZG scuffing test, based on DIN ISO 14635, A/2,76/50, scuffing load stage | >= 12 |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 36 months |
