Description
The output range of DS / 1 series of burner is 45-550 - kw , suitable for the low and medium temperature hot water boiler, hot air or steam boiler, heat conduction oil furnace.
The running mode of this burner is smooth two stage fire. This series burner can reach high running level in all applied field, and lower fuel consumption and running cost. Special design makes the burner small, easy to use and maintain. All parts are completed to ensure the flexibility of working.
| TS34 | 70/130÷390kW |
| TS44 | 101/203÷550kW |
| TS50 | 116/290÷580kW |
| TS70 | 192/456÷814kW |
| TS100 | 232/698÷1163kW |
| TS130 | 372/930÷1512kW |
| TS190 | 470/1279÷2290kW |
| TS250 | 630/1252÷2715kW |
Burner headTS series burner heads of different length can be optioned by the thickness of boiler foreplate and boiler type. Depending on the type of boiler, check if the depth installed in the combustion chamber is correct.
The relative position of burner inner cylinder can be changed by regulating the screws fixed on the flange , thus to adjust the required maximum output..
Gas valve groupThe burner is equipped with a butterfly valve used to adjust fuel delivery, which be controlled by a motor with variable line CAM.
Fuel can be supplied from the left or the right of the burner.
If the pressure of fuel gas supply pipe ( parts of TS 34-44) is too high, the largest gas pressure switch will stop burner .
The required gas valve can be optioned according to the gas output and pressure of supply pipeline.
EACOON R&D team is constantly seeking to use the latest 3D CAD system and well-equipped laboratory and high-tech simulated working environment to achieve better performance. In particular, R&D laboratories are equipped with precise electronic quasi-magnetic infrared and ultraviolet combustion analysis equipment, digital multiscale acoustic equipment, evolutionary oscillators interfaced with computerized data acquisition systems, and integrated multifunctional tools for performance analysis and long-term testing . In addition, EACOON has independently developed two-fluid, low-nitrogen and ultra-low-nitrogen, and high-concentration organic waste liquid incinerators based on European advanced cutting-edge technology and according to the special working conditions of domestic hazardous waste and waste-to-energy projects. And other technologies, a total of more than 60 national patents. Combustion and electronics specialists analyze and implement new technology solutions ensuring superior performance and reliability.
CFD simulation technology
Using CFD simulation technology, the finite element analysis and calculation of the flow field inside the burner and the furnace is carried out, and the basis and theoretical data of the temperature, pressure, flow rate, and flue gas composition in the entire combustion reaction area are obtained, providing guidance for the development of new technologies for combustion equipment .
Pre-sale Service
· Arrange professional salesmen to contact with customers timely, and understand the needs of customers preliminary.
· According to customer needs to provide professional technical support, but also canprovide video quidance and simulated experiment;
· Based on the final actual conditions to provide the best technical parameters and select the best pump type.
After-sales Service
· Once the salesman receives the customers feedback, communicate and provide the best solution timely.
· When the customer's improper operation causes the problems, the salesman should inform the customer correct use method timely;
· Salesman mail return to visits regularly and ensure every customer will satisfaction.
Complaint
