Description
10 Wire AED Cable 2 core 22 AWG with Low Noise Layer and Shielded 8 core 26AWG for signal OD 7.6mm TPU Jacket
(Free Design)
Defibrillator Coil & Defibrillator Wire
Defibrillator wires have 3 main forms:Coil & Round;Straight & Round and Flat Ribbon.The most used is Coil cord for AED paddle,and Flat Ribbon cable for AED Pad.
The Defibrillator cable usually contains 3 to 10 depends on its purpose and applications. A simple 3 wire defibrillator (it could be a aed training machine) only need 3 wires for the paddle. And ECG Defibrillator will use 4-8 signal wire to get ECG signal,indicates the operator if it is necessary to make difibrillation and when to make it. The more Intelligent a ECG Monitor with defibrillator is,the more wires it need.ECG Defibrillator monitor the heart and indicates the operator when is the best time to defibrilate and how many joules power is needed.It make defibrillation easier and more accurate.
As a China Medical cable manufacturer ,we custom AED cable ( AED leads) to interconnect between its power unit and the patient paddle or Pads according to customer,s requirement
AED electrode pads become a mainstream,compared with Paddles,AED Pads/Gel are used to reduce transthoracic impedance when paddles are applied directly to the chest wall to deliver a shock. Better protective for patients and doctors. Especially with Mindray intellectual AED, an un-trained person can also make an emergency rescue under the guide of the defibrillators' screen and voice
AED Cable has 1 or 2 17AWG-22 AWG wires can bear 5000V AC voltage and 3-8 wires for Signals transition.Round Coiled Extension cord and Flat Bulk Cable are the two main forms.
Coiled Extension cord for Defibirllator adopts TPU as Jacket. As for insulation,when extreme high voltage such as 8000V AC ,is needed,and also need the cable to be thin,then Teflon (FEP,PFA PTFE) is used.
Welcome Ask for sample or custom solution:
Technical Specification
| Conductor | Material | Tinned copper alloy+kevalr2C | Tinned copper alloy+kevalr 8C |
| AWG | 22AWG | 26AWG |
| Construction | 25/0.05Tsn+200DKEVALR*7C | 66/0.05Tsn+200DKEVALR |
| Pitch | | |
| Pitch Direction | right | right |
| Stranded O.D | | |
| Insulation | Material | | |
| NO of wire | 2C | 8C |
| O.D mm | 1.9±0.08 | 1.05±0.05 |
| AVG. Thickness mm | 0.45 | 0.22 |
| Min. Thickness mm | 0.36 | 0.17 |
| Color | RED/BLK | 8 colors |
| Low-noise | Material | Conductive PVC | N/A |
| NO of wire | 2C | N/A |
| O.D mm | 2.1±0.05 | N/A |
| Outer shield | Material | Tinned copper | N/A |
| Type | 0.08TC Spiral | N/A |
| Coverage | 95% | N/A |
| Wrap | Material | PTFE | N/A |
| coverage | >25% | N/A |
| Filling | Material | kevlar |
| Cabling | Pitch mm | 60±10 |
| Material | FILLER+ALL CORE |
| | 5.7 |
| Wrap | Material | PTFE |
| coverage | >25% |
| Jacket | Material | TPV Santoprene |
| O.D mm | 7.6±0.2 |
| AVG. Thickness mm | |
| Min. Thickness mm | |
| Color | BLACK or Customized |
| Mark | |
Its Matchable Branch cable for AED(1+8):
Other Coiled Cable for Defibrillator as following:
Your may also interested in following medical grade cables
Single lead to 18 leads cable for ECG Monitoring System as following:
Coaxial Low Triboelectrical Noise Cable for micro signal devices,including ECG monitor
1P+2C/3C/4C/5C/6C/7C for Spo2 Extension Cable
Acocording to different Sterrilization Method or Chemical or Physical Properties,we provide
different materials for options:
| Conductor Options | Shielding Options | Enhancement Options | Insulation & Jacketing Materials |
| Bare Copper | Bare Copper Braid | Strength Members | CPE/Chlorinated Polyethylene | PFA/Perfluoroalkoxy |
| Tinned Copper | Tinned Copper Braid | Water Blocking | EPDM/Ethylene Propylene Diene Monomer | PFE/Perfluoroelastomer |
| Silver Plated Copper | Silver Plated Copper Braid | Fillers | ETFE/Ethylene Tetrafluroroethylene | PP/Polypropylene |
| Nickel Plated Copper | Nickel Plated Copper Braid | Rods | FEP/Fluorinated Ethylene | PTFE/Polytetrafluoroethylene |
| High Strength Alloys | High Strength Alloys Braid | Tubes | Foamed FEP | PUR/Polyurethane |
| Copper Clad Steel | Copper Clad Steel Braid | | Foamed PFA | PVC/Polyvinyl Chloride |
| Prebonded Conductor | Stainless Steel Braid | | Foamed PE | Silicone |
| Overcoated Conductor | Aluminum Mylar Foil Shield | | Foamed TPE | Tefzel |
| Topcoated Conductor | Spiral Shield | | Halar | TFE/Tetrafluoroethylene |
| | | | HDPE & LDPE | TPE/Thermoplastic Elastomer |
| | | | Hytrel | TPR/Thermoplastic Rubber |
| | | | mPPE/Modified Polyphenylene | XLPE/Cross-Linked Polyethylene |
| | | | Neoprene | XLPO/Cross-Linked Polyolefin |
| | | | PE/Polyethylene | |
Custom Medical Cable Manufacturer -3 Key Factors To Make Your ChoiceTo choose a reliable custom medical cable manufacturer is critical to a medical device manufacturer. When you are making a choice, there are 3 factors you have to consider:
First,Are They An Experienced Medical Cable Manufacturer?
Working with a experienced medical cable expert is critical if you want to keep your medical devices running safely, functionally and durable. A medical cable manufacturer must be ISO 13485 certified. This is the most direct way you can make a rough judgment how many years they have engaged in medical
cable. But this is not totally reliable, some cable manufacturers would like to apply all types of certifications when then founded the company.
An experienced medical cable factory
usually will ask you following questions when you make an inquiry if you did not give them your exact requirement:- What medical device will the medical cable be applied to/used for?
- What is the acceptable OD(out diameter)and tolerance of the cable
- What is the gauge of each wire? Or how many strands of specific conductor you would like each wire to be
- Where is the medical device being used (i.e. X-ray room, doctor's office, Ambulance, operating room, etc.)?
- Do you prefer disposable medical cable or reusable cable?
- What are your sterilization methods (chemicals or physical? What are the chemical sterilization materials? What is the
temperature, pressure, Ray (Ultraviolet, note: X-ray not used for sterilization)? - Will the medical cable be exposed to any other chemicals or fluids? Will there be any extra coat to protect the cable?
- What is the contacting level between the cable and patient (i.e. absolutely no contact, occasional contact, always
contact, implanted, etc. This relates to biocompatibility and material choosing)? - Do you have any supplementary requirements (such as, UL94 Level/framing rate, temperature resistant,ultra-flexible, Matt or Glossy, coiling etc.)?
Second:what Are Their Producing Equipment And Laboratory Testing Devices?
Medical cable manufacturing has much more processing procedures than normal cable. And in most situation, it demands the conductors to be as thin as possible. For the
same gauge cable, thinner conductor will make it more flexible and better electronic performance. Not all conductor stranding machine can strand thin conductors as they are easy to break.so the precision level can determine the quality of the wire in some way besides of staff expertise. For testing devices, without the right testing devices, you cannot make related testing, such as RoHS,High Frequency,Triboelectric noise ,Tensile…(please refer to our Lab)
Third:Strategic Partners
For most industries, Partners belongs to commercial secret. For medical cable field, medical devices manufactures has a AVL(approved vendor list),similar to UL in some way. If a medical cable manufacturer is in the AVL of many worldwide famous brands,this is the easiest way for you to choose it as your potential partner too. YQF
has be a partner for many famous brands and in their AVL for many years,contact us for trading reference if you are making medical cable supplier. 1,High pressure resistance: AC 1500V, leakage current 0.25Ma/Min DC5000V,the leakage current less than 0.25mA,no breakdown
2,Insulation resistance:DC500V,(1M) the resistance are more than 10000M
3, Bending test: loading 800g,±90°40times/min more than 5000time
4,Conductor resistance: < 0.239Ω/M
Our Advantage:
1, We are manufacturer of more than 16years' experience, produce all the products displayed in our website.Providing OEM/ODM service
2,Free samples available with 3days delivery
3,Certifications: ISO9001:2008,ISO13485-2003 ISO14001-2004
4Warranty: 12months for reusable SPO2 sensor cable,6months for ECG cables
5,Top-quality,non-toxic, anti-interference,soft and durable TPU cable
6, Excellent skilled staffs with professional product knowledge and high work efficiency to solve your any problems within 6hours.
7,strictly testing before packing and shipping:
1) 1.Bending testing
2).Resistance testing
3).Capacitance testing
4).Dielectric strength testing
5).Aging testing
6).Low noise testing
A leading manufacturer of customized wires and cables1,Focus on Cable R&D and Manufacturing for 16 years2,Annual output: 80,000KM ,round the Earth for 2 circle3, ISO 9001,ISO13485,ISO14001 certified4,Repeated order rate:100%5,30% of our partners have been working with us for 10 yearsProducts Certificates We have
Complaint
