Optix Osn 1500 Optical Transmission System Product

Min.Order: 1
Product origin: Chongqing, China
Infringement complaint: complaintComplaint
US$ 600 ~ 1000

Description

 

 

Product Description

Positioning

The OptiX OSN 1500 intelligent optical transmission system (the OptiX OSN 1500 for short) developed by HW is the next-generation intelligent optical transmission equipment.

The OptiX OSN 1500 is of a "universal switch" architecture. That is, the OptiX OSN 1500 can be used in packet mode or in TDM mode. When used with the other equipment of HW, the OptiX OSN 1500 supports various networking applications, such as the pure packet mode application, hybrid networking application (overlay networking of the packet mode and TDM mode), and pure TDM mode application. By using a proper networking solution, the data service and conventional SDH service can be processed in the optimal manner.

Technology

The OptiX OSN 1500 efficiently transmits voice, data, SAN/Video, and video services on the same platform.

In packet mode, the OptiX OSN 1500 supports the following technologies:

  • Multiprotocol Label Switching (MPLS)
  • ETH PWE3 (Pseudo Wire Edge to Edge Emulation)
  • TDM PWE3

In TDM mode, the OptiX OSN 1500 supports the following technologies:

  • Synchronous digital hierarchy (SDH)
  • Plesiochronous digital hierarchy (PDH)
  • Ethernet
  • Asynchronous transfer mode (ATM)
  • Storage area network (SAN)/Video
  • Wavelength division multiplexing (WDM)
  • Digital data network (DDN)

Network Application

OptiX OSN 1500 is mainly used at the access layer of the metropolitan area network (MAN). The network application scenarios are described as follows:

  • In TDM networking, can be networked with the other OptiX transmission equipment (the OptiX OSN 9560, OptiX OSN 9500, OptiX OSN 7500 II, OptiX OSN 7500, OptiX OSN 3500 II, OptiX OSN 2500, OptiX OSN 3500, OptiX OSN 500, and OptiX OSN 550) to optimize carrier investment, achieving a full range of networking solutions at the access layer, convergence layer, and backbone layer.
  • With the packet switching technology, can constitute a packet data transmission network with the other OptiX transmission equipment (the OptiX OSN 7500, OptiX OSN 7500 II, OptiX OSN 3500, OptiX OSN 500, OptiX OSN 550, and OptiX RTN 900) to meet the requirement for bearing IP services.
  • Can be flexibly networked with WDM equipment and Metro equipment.
  • Can transparently transmit services over third-party Layer 2 networks, allowing end-to-end configuration and management.

Detailed Photos

 

Product Parameters

 
 

Indicator and Specifications

 

Description
AppearanceOptiX OSN 1500A
OptiX OSN 1500B
Dimensions (H x W x D)

•  OptiX OSN 1500A: 131 mm x 444 mm x 262 mm
•  OptiX OSN 1500B: 221 mm x 444 mm x 263 mm

Number of valid slots

•  OptiX OSN 1500A: 8 for processing boards
•  OptiX OSN 1500B: 12 for processing boards and 4 for interface boards

Equipment capacityPacket

8 Gbit/s

TDM60 Gbit/s higher order cross-connections and 20 Gbit/s lower order cross-connections
Service type supportedSDH, PDH, ATM, CES, Ethernet , PCM, SAN, video and others
Network topologyPoint-to-point, chain, star, ring, ring with chain, intersecting rings, tangent rings
Backup and protection

Networklevel
protection (packet)

Tunnel 1:1/1+1 APS, PW 1:1/1+1 APS, LPT

Networklevel
protection (TDM)

•  SDH protection: subnet connection protection, linear
MSP, ring MSP, DNI protection, shared-fiber virtual path
protection, optical-path-shared MSP
•  EoS protection: LCAS, LPT, STP/RSTP, MSTP, RPR, VP-Ring/VC-Ring protection

Devicelevel
protection

•  Packet LAG
•  TDM: TPS, BPS, PPS, LAG, DLAG
•  1+1 hot backup for system control, switching, and timing units
•  1+1 hot backup for power input units
•  1:N protection for +3.3 V power supply of the board
•  Intelligent fan
•  Board protection modes under abnormal conditions

MaintenanceMPLS OAMCV, FFD, BDI, FDI, Ping, Traceroute
ETH OAM (packet)

•  Ethernet service OAM: CC, LB, LT, LM (only singleended LM), DM (only two-way DM)
•  Ethernet port OAM: OAM auto-discovery, link
performance monitoring, remote loopback, fault detection, self-loop detection

ETH OAM (TDM)

•  Ethernet service OAM: CC, LB, LT, OAM_Ping
•  Ethernet port OAM: OAM auto-discovery, link
performance monitoring, remote loopback, fault detection, self-loop detection

SynchronizationPacket

•  Physical-layer clock (SDH)
•  Synchronous Ethernet
•  IEEE 1588v2
•  CES ACR

TDMPhysical-layer clock (SDH)
DCNOutband DCNHWECC, IP over DCC, OSI over DCC
Inband DCNHWECC, IP
Standard working voltage

•  If the standard voltage of the input power is -48 V, the power voltage ranges from -38.4 V to -57.6 V.
•  If the standard voltage of the input power is -60 V, the power voltage ranges from -48 V to -72 V.

Installation methodETSI cabinet, 19-inch cabinet, wall, desk

Equipment
running
environment

Subrack
temperature

•  Long-time operation: 0ºC to 45ºC
•  Short-time operation: -5ºC to +55ºC

Subrack
humidity
(relatively)

•  Long-time operation: 5-85%
•  Short-time operation: 5-95%

Reliability
specifications

System
availability

0.9999953

Mean time
to resolution (MTTR)

2 h

Mean time
between
failures
(MTBF)

•  OptiX OSN 1500A: 48.16 years
•  OptiX OSN 1500B: 48.07 years

 

Company Profile

  Chongqing Chimu Technology Co., Ltd. was established in 2011, we have been engaged in this industry 11 years.   Relying on 11 years of deep experience in the communication field and scientific and technological innovation ability, through the integration of multi-brand, full series of communication products resources, with a one-stop service model.  Let the network better connect you and me, connect the world.  In order to meet the needs of customers, we have eatablished a perfect supply chain system to provide super products with reliable quality and reasonable price. 
  We are devoted to offering Switches,  Routers,  Servers, Storages, LTs,  SDHs,  Network Modules,  Interface Cards,  Security Firewalls, Wireless AP. Our long-term aim is to provide users high-quality, efficient, economic, timely services.  Looking forward to establish long-term and win-win business relations with you.

Our Advantages

A)Stable and Wide Supply Chain System
we have established a perfect supply chain system to provide a wide range of products with reliable quality and reasonable price.
B)Competitive Price
We ensure the most competitive price. Warm reminders here, telecommunications equipment configuration is quite different, the price shown on the website is only for reference. After configuration and quantity been confirmed, we will give the final most competitive discounted price.
C) Safe and Easy Payment Solutions
We accept all major credit cards, PayPal and wire transfer.
D)Fast Delivery and Shipping
Fast, professional and reliable delivery.
E)11 Years Experience
we have been engaged in this industry more than 11 years, we have rich industry experience.

Packaging & Shipping

FAQ

Q: How about your main products?
A: Our product lines include Switches, Routers, SFP Modules, OLTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP etc.

Q: What brand of products do you offer?
A: We can supply all the brands you need.

Q: what services can we provide?
A:Accepted Delivery Terms: FOB,CFR,EXW,FCA;
   Accepted Payment Currency:USD,EUR,CAD,HKD,GBP,CNY;
   Accepted Payment Type: T/T,MoneyGram,PayPal,Western Union,Cash etc...

Q: Can we get free samples?
A: Sorry, it is not available, but you can pay for one.

Q. How can we guarantee quality
?

A:Always a pre-production sample before mass production;
   Always final Inspection before shipment;

Q: How about your delivery time?
A: Generally, it will take 1 to 10 days after receiving your deposit.  The specific delivery time depends on the items and the quantity of your order.

Q: Do you test all your goods?
A: Yes, We have professional engineer to test all devices before shipping.

Q:How about the MOQ?
A:1 piece



Scroll to Top