Technical Parameter:
Automatic High Speed Energy Saving Type Machine | Model | PM-K4 | PM-K6 | PM-K8 | PM-K12 |
Bottle type specification
| Cavity | 4 | 6 | 8 | 12 |
| Max.volume | 2L | 2L | 2L | 0.75L |
| Bottle mouth maximum overall diameter | 28-38mm | 28-38mm | 28-38mm | 28-38mm |
| Bottle biggest diameter | 100mm | 100mm | 100mm | 100mm |
| Bottle maximum height | 330mm | 330mm | 330mm | 330mm |
| Capacity | Theory output | 6000-8500BPH | 9000-12000BPH | 14000BPH | 24000BPH |
| Power specification | Light tube quantity | 16pcs | 32pcs | 32pcs | 32pcs |
| Light tube power | 1.25KW | 1.25KW | 1.5KW | 1.75kw |
| Maximum heating power | 20KW | 40kw | 48KW | 56kw |
| All electric machine installation | 29KW | 49kw | 65KW | 71kw |
| Actual consumption | 30%--60% | 30%--60% | 30%--60% | 30%--60% |
Air pressure specification
| Work pressure | 5-6kg/cm2 | 5-6kg/cm2 | 5-6kg/cm2 | 5-6kg/cm2 |
| Blow bottle pressure | 25-45kg/cm2 | 25-45kg/cm2 | 25-45kg/cm2 | 25-45kg/cm2 |
| Higher -pressure gas consumption | 6000Ltr/min | 8000Ltr/min | 12000Ltr/min | 24000Ltr/min |
Frozen water specification
| Work pressure | 5-6 kg/cm2 | 5-6 kg/cm2 | 5-6 kg/cm2 | 5-6 kg/cm2 |
| Temperature range | 10ºC | 10ºC | 10ºC | 10ºC |
| Consumption | 8000kcal/hr | 8000kcal/hr | 12000kcal/hr | 12000kcal/hr |
| Forzen water flow | 88L/min | 120L/min | 150L/min | 220L/min |
| Machine specification | Machine size | 3.6x1.6x1.9 | 4.8x1.8x1.9 | 5.8x1.6x1.9 | 7.6x1.6x1.9 |
| Machine weight | 4.3tons | 6.1tons | 7.5tons | 11.5tons |
Automatic Type Machine | Model | Item | PM-A2 | PM-A4 | PM-A6 | PM-9000 | PM-12000 |
| Productivity | Depend on bottle design | 1800-2200PCS/H | 3500-4200PCS/H | 5500-6300PCS/H | 8000-9200PCS/H | 11000-12200PCS/H |
| Product type | Volume | 0.1-2.0L | 0.1-2.0L | 0.1-2.0L | 0.1-0.75L | 0.1-0.75L |
| Body diameter | ≤100mm | ≤100mm | ≤100mm | ≤100mm | ≤100mm |
| Height | ≤310mm | ≤310mm | ≤330mm | ≤330mm | ≤330mm |
| Neck diameter | ≤38mm | ≤38mm | ≤38mm | ≤38mm | ≤38mm |
| Mold | Cavity | 2 | 4 | 6 | 6 | 9 |
| Mold thickness | 240mm | 240mm | 240mm | 240mm | 240mm |
| Mold volume | 260*240*370mm | 510*240*360mm | 640*240*360mm | 640*240*360mm | 840*240*360mm |
| Main machine power | Electrical source power | 380V/220V 50/60Hz | 380V/220V 50/60Hz | 380V/220V 50/60Hz | 380V/220V 560/60Hz | 380V/220V 560/60Hz |
| | 3Phase | 3Phase | 3Phase | 3Phase | 3Phase |
| Rated power | 25kw | 49kw | 73kw | 97kw | 127kw |
| Really use power | 6.5kw | 13kw | 25kw | 32kw | 52kw |
| Air system | HP air compressor | 1.6m³/min3.0MPa | 3.0m³/min3.0MPa | 6.0m³/min3.0MPa | 6.0m³/min3.0MPa | 8.0m³/min3.0MPa |
| LP air compressor | 1.0m³/min1.0MPa | 1.6m³/min1.0MPa | 2.0m³/min1.0MPa | 2.0m³/min1.0MPa | 2.0m³/min1.0MPa |
| Air tank | 0.6m³3.0MPa | 0.6m³3.0MPa | 1.0m³3.0MPa | 1.0m³3.0MPa | 1.0m³3.0MPa |
| Air dryer | 1.0m³/min3.0MPa | 2.0m³/min3.0MPa | 6.0m³/min3.0MPa | 6.0m³/min3.0MPa | 8.0m³/min3.0MPa |
| Cooling water | Water Chiller | 3HP | 3HP | 5HP | 5HP | 8HP |
| Machine | Size(L*W*H) | 1900*1280*1930mm | 1900*1860*1930mm | 4100*1400*1800mm | 4100*2200*1800mm | 4700*2600*1800mm |
| Weight | 2000kg | 3600kg | 4200kg | 4800kg | 5700kg |
| Preform unscrambler | Size(L*W*H) | 2000*950*2480mm | 2000*950*2480mm | 2000*950*2480mm | 2000*950*2480mm | 2000*950*2480mm |
| Weight | 500kg | 500kg | 500kg | 500kg | 500kg |
Semi automatic type machine: | | UNIT | PM-12 | PM-8Y | PM-1500 | PM-1-20 |
| | Theoretical output | PCS/h | 500 | 900 | 1800 | 90 |
| Product | Volume | L | 5.0 | 2.0 | 2.0 | 20 |
| Max. Height | mm | 360 | 360 | 360 | 550 |
| Max. Diameter | mm | 120 | 105 | 105 | 300 |
| Mould | Number of cavities | / | 1 | 2 | 4 | 1 |
| Mould piate dimension(L*H) | mm | 490*470 | 490*405 | 490*405 | 620*620 |
| Mould thickness | mm | 250 | 220 | 220 | 380 |
| Mould opening stroke | mm | 220 | 180 | 180 | 380 |
| Electrical | Power | / | 220_380V/50_60Hz | 220_380V/50_60Hz | 220_380V/50_60Hz | 220_380V/50_60Hz |
| Total power | KW | 11 | 11 | 21 | 36 |
| Heating power | KW | 10 | 10 | 20 | 37 |
| Machine | Main body dimension(L*W*H) | M | 1.5*0.65*2.0 | 1.5*0.65*2.0 | 1.5*0.65*2.0 | 2.1*0.75*1.6 |
| Main body weight | Kg | 600 | 550 | 550 | 900 |
| Pre-heater(L*W*H) | M | 1.5*0.65*1.5 | 1.4*0.65*1.5 | 1.8*0.65*1.5 | 2.7*0.7*1.6 |
Brand Name | Name | Brand |
| PLC controller | Delta TAIWAN |
| Touch screen | Delta TAIWAN |
| Clamping servo | Delta TAIWAN |
| Stretch servo | Delta TAIWAN |
| Range servo | Delta TAIWAN |
| Bottle out servo | Delta TAIWAN |
| Main chain servo | Delta TAIWAN |
| Cylinder | FST Germany |
| Magnet valve | FST Germany |
| Photoelectric switch | OMRON Japan |
| Proximity switch | OMRON Japan |
| Contactor | SCD France |
| Switch power | SCD France |
| Sensor | Sutonics Korea |
Name:Auto-loader
Auto-loader improves working efficiency, accurate transportation, reliable and durable, raw materials are completely free of moisture, pollution, foreign matter, and loss during feeding process. Realize transportation process of feeding process, avoid danger of high-altitude feeding, reduce labor intensity and increase production efficiency.
Name:Servo transmission system
High positioning accuracy, fast speed and stability, good reliability. Gas circuit design will divide action and blowing into three parts to meet the needs of different pressure for blowing bottles and movement; Adopt high pressure and double crank arm link locking, strong clamping force.
Name:Infrared lamp heating system:Adopt infrared lamp heating, strong penetration, preform rotation heating, track revolution, heating evenly, fast and reliable; Heating lamp, reflector width and height can be adjusted to suit preform heating of different structure, with automatic temperature-removal device to ensure the constant temperature of oven. Name:Servo clamping and stretching system for bottle moldingBlow the bottles according to the designed bottle molds,it adopts servo motor using for stretching to ensure the bottle blowing speed faster and more stable bottle quality.There are two cranks to control the clamping system which can shorten the mold-clamping time and improve productivity, and also solve the swelling mold and big joint line problem with the effect of pressurize plate.Name: Auxiliary equipmentComplete Air compressor,filter,air tank to supply the machine with required gas.
Blowing / Blow machine Features:
1. Stable performance with advanced PLC.
2. Automatic preform conveyer to save human cost.
3. Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4. High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5. High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6. Introduce the air cylinder to avoid contamination and noise.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mould.
9. Customized bottle mold design.
10. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process. Easy installation and starting.
11. Contamination is avoided for the bottle body.
12. Ideal effect of the chilling with the chilling system.
13. Low rejection rate: Less than 0.2 percent.
14. Safereliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand. Our ServiceInstallation serviceWhen you finish the Preparation conditions, our fast and professional aftersales service engineer team will go to your factory to install the machine, give you the operating manual, and train your employee until they can operate the machine well.
The sample service1. We can send you the video of the running machine.
2. You are welcome to come to visit our factory, and see the machine running.
Customized service1. We can design the machines according your requirements(materil, power, filling type, the kinds of the bottles, and so on), at the same time we will give you our professional suggestion, as you know, we have been in this industry for many years.
After-sales service1. We will delivery the machine and provide the bill of load on time to make sure you can get the machine quickly
2. When you finish the Preparation conditions, our fast and professional aftersales service engineer team will go to your factory to install the machine, give you the operating manual, and train your employee until they can operate the machine well.
3. We often ask feedback and offer help to our customer whose machine have been used in their factory for some time.
4. We provide one year warranty
5. Well-trained & experienced staff are to answer all your inquiries in English and Chinese
6.24 hours for engineer response (all services part 5days in customer hand by Intl' courier).
7.12 Months guarantee and life-long technical support.
8. Your business relationship with us will be confidential to any third party.
9. Good after-sale service offered, please get back to us if you got any questions.
Quality ControlWe have the single quality department, that make sure the material of the raw materials is good, and ensure the machine running smoothly.
If you want to know more information about the product, You can send an inquiry, we will solve any of your problems and send you running vedio.
FAQ
1. How to tell us your enquiry?
: You can contact us by email, phone call, fax, Instant Messenger (Trademanager, WhatsApp, Skype) and let us know your requirement.
2. Are you manufacturer or trading company?
We are industrial manufacturer, which locates in Zhangjiagang city over 22 years.
3. Where is your factory?
Our Factory is located in Zhangjiagang City, it is very near to Shanghai and Wuxi (airplane and train both available). If you arrive at Shanghai or Wuxi, we can pick you up to visit our factory.
4. Do you have any technical supports with your Bottle Blowing Machines?
Yes, We have a professional team of engineers who owned many installation, debug and training experiences abroad, are available to service machinery overseas.
We Warmly Welcome Customers All Over The World To Our Company. If You Have Interests In Our Products. Please Contact Us If You Have Any Problems.
Complaint
