Complaint
Spray bake paint booth Automotive Spray Booth/Car Paint Spray Room CE approve/Spray Paint Booth/Booth Spray
Model: HE-606
| Outside size (m) | 7*5.4*3.42m(LW"H) | |
| Inside size (m) | 9*3.9*2.7m(LWH) | |
| Wall panel | Color | Optional: gray, white, blue, red |
| Material | Rock wool density: 120kg. Thickness: 50mm | |
| Color steel plate | Thickness: 0.426mm | |
| Structure | Strengthen structure, reduce deformation improve wind pressure resistance double-sided film | |
| One side | Use 8mm tempered glass, with heat insulation and explosion-proof film on one side. 360°viewable | |
| Door | Size | 3000(W2600(H) |
| Structure | Use 0.8mm zinc plate, steel frame welding to ensure strength; door hinge uses 6mm steel plate to ensure no deformation or sagging, 5mm square tempered glass observation window is set | |
| Color | Optional: gray, white, blue, red | |
| Safety door + small steps | 1800 x 600 (mm), 1 aluminum alloy door | |
| Lighting system | LED | (2) side x (4) group x (4) branch, (18) W/ branch Using LED it works normally when the power is as low as 180 volts. |
Air supply system | Control cabinet | 40*40 square tube welding. 0.8 galvanized sheet overall painting |
| Inlet motor | YDW type centrifugal fan, 4 kilowatts, with M type air inlet | |
| Air volume | Air volume 24000 (m3/hour), wind speed 0.25-0.35 (m/s air change frequency 280 times/h | |
| Wind tube | 4 straight pipes (7007001000) and 1 elbow pipe (700700"R200) | |
| Heating system | Short-wave infrared radiator | 3*51.5cm*10 groups (30kw) double-door short-wave infrared heaters The power cord adopts a high temperature resistant cable with a diameter of 1.5 square meters |
| Ground assembly | Made of galvanized steel | Made of 1.2mm galvanized sheet and 40"80"1.8 square steel bracket. All grill bottom with fiberglass wool |
| Approach bridge | Anti-skid checker plate | |
| Netting | Top cotton | 6 groups/set of support mesh installation, cotton rack 30*30 square tubes, filtration efficiency ≥96%. |
| Structure | Disassembly method: cotton screw + pressed disc method | |
| Top beam | Well-shaped connection bracket | 40*60*1.5 square tube |
| Top plate | Galvanized sheet assembly, thickness of steel plate: 0.8mm | |
| Filtering system | Primary filter cotton, sub-high efficiency filter cotton | |
| Electronic Control System (Mechanical Control) | The box is made of 1.5mm galvanized sheet the surface is sprayed and there are total control switches, fan switches, lighting switches heating switches, and single-group baking light switches, all of which are independently controlled. | |
| Installed total power | 39.5KW (three-phase four-wire) 380V/50H2 | |
Yantai Lift Equipment Co., Ltd. is a joint-stock enterprise specializing in the production and sales of wheel alignment, car lift, tire changer, wheel balancer and other garage equipment.
The company has four major production bases: Wheel alignment, car lift, tire changer and wheel balancer. The company always adheres to independent research and development and independent production. Advanced intelligent equipment and scientific management mode provide its excellent quality assure.
Wheel alignments include car wheel alignments, truck wheel alignments, and car lifts include scissor car lifts, single-post car lifts, two-post car lifts, four-post car lifts, and motorcycle lifts.
Our products have been exported to Australia, Thailand, Malaysia, Indonesia, France, Spain, Turkey, Jordan, Mexico and other countries.
Our products: The perfect combination of high quality and high cost performance.
Our mission: High-quality products serve the automotive aftermarket in China and the world.
We are becoming a modern and competitive company, a leader in the field of automotive service equipment.
Trade Terms | FOB / CFR |
MOQ | 3UNITS (USD200.00 extrally charged for LCL shipment to cover the inland freight + custom declaration fee) |
Port | QINGDAO |
Shipment | BY SEA |
Payment Terms | T/T |
Payment condition | 30% prepayment,balanced againt BL copy&L/C at sight. |
Supply Capability | 1000units/month |
Sample Availability | Yes ,But all freight(Inland freight +seafreight) covered by buyer |
Sample Time | 5-10days(depends on whether have in stock) |
Lead Time | 25-30days(Rush season 5-10days longer) |
Packing | Metal frame&Carton |
Delivery time | 30-45days shipping time (depends on destination position) |
Service | 1% free parts;1year warranty after port of destination |
1. Why should I choose our spray booth?
There are several reasons you should strongly consider purchasing our tire changer:
*Top raw materials from only the finest plants
*Only professional cost-effective equipment
*Low prices with high quality revenue producing products
*Increase productivity for your customers( Your customers gain more, they will enjoy buying from you.)
*The best customer service. Quick reply within 24 hours and more.
*Great Warranty
2. How safe are our spray booth?
Ourtire changer have been tested and CE certified for safety . They also meet the American and Australian Standard.
3. Should I keep repair and replacement parts in stock?
Yes, most all commonly required repair and replacement parts should always keep in stock.
4. Are tire changer designed for commercial use?
All of our tire changer can be used in commercial applications without any problems.
5. Do you offer any custom designs?
Yes,we provide OEM/ODM services to top range partners.Produce a superior product for you by your designs.
