Description
| Product Model | ATM-23 |
| Nominal working pressure | 0.22MPa |
| Rated Functioning Temperature | 134ºC |
| Temperature Range | 115~134ºC |
| Tank Capacity | 2.5 |
| Voltage/frequency | AC220V/50Hz |
| Power | 2200W |
| Capacity | 23L |
| Sterilization chamber Dimension | mm | ∅250*452 |
| In | ∅9.8*17.8 |
| Net weight | KG | 53Kg |
| LBS | 117 |
| Gross weight | KG | 60kg |
| LBS | 132 |
| Boundary Dimension | (LXWXH)mm | 490*455*690 |
| (LXWXH)In | 19*18*27 |
| Packing Dimension | (LXWXH)mm | 560x510x760 |
| (LXWXH)In | 22x20x30 |
| (20'/40'/40'H)Container Load | 120/240/270 |
| Cabinet Type | Horizontal (open forward) |
| Ambient Temperature | 5~40ºC |
| Heating Type | vapor generator |
| Cold Air Removal Method | Pulsation vacuum |
| Water-Injection Method | Automatic |
| Drainage Method | Manual |
| Door Opening Method | Manual |
| Safety protection | Anti-dryburning, over-pressure protection,over-temperature protection,over-current protection,sensor disconnection detection. |
| Sensor Type | PT100 |
| Controller | Microcomputer |
| Display Screen | LCD |
| Accessories details | Manual, instrument tray, instrument tray holder, door adjustment wrench, drain pipe |
Precise control and efficient sterilization
•The built-in independent steam generator can quickly generate saturated steam, and
make the steam fully contact every corner of the instrument under the pre-vacuum
state, which can truly achieve efficient and thorough sterilization
• Convenient operation, LCD dynamic display, and detailed display of current status during
Sterilization
After vacuum deep drying, the drying achieves the best effect
• Meet the European grade B standard, three pulsating vacuum to ensure sterilization effect
• Pressure safety protection, overtemperature and overpressure double protection
• Fully comply with European EN13060 small sterilizer standard
• Multilevel protection. safe and reliable
- Position the device on a plane surface with minimum capacity 60 Kg.
- The sterilizer should be placed on a level worktable.
- Improper water level in the chamber could cause a sterilizer malfunction.
- Leave at least 10 cm between the device rear part and the wall. The clearance required to open the door is 40cm.
- Position the autoclave at such a height as to make it possible for the operator to check the whole sterilization chamber and carry out the normal cleaning operations.
- The room where the device is installed must have sufficient ventilation.
- Do not install the autoclave near washing basins, taps, etc. where it is likely to be splashed.
- Do not install the sterilizer nearby a heat source.
- Do not lean on the door when it is opened.
- Do not place trays, papers, fluid containers, etc. on the sterilizer.
- Check the label on back panel of sterilizer to verify voltage rating for the unit. Failure to connect
the autoclave to an appropriate power supply could result in damage to the unit, and electrical shock to personnel.- Plug power cord into a properly polarized and grounded receptacle rated. A dedicated circuit only used for the sterilizer is recommended.
• Automatic protection function: over temperature protection; over pressure protection,low water level protection, anti-dry burning, safety door lock
• After sterilization, the buzzer will remind and the machine will stop automatically
• Automatically discharge cold air and steam after sterilization
• Built-in steam generator to quickly provide saturated steam
• High-quality stainless steel liner, sealed cover
• Door lock safety interlock device
• BD test, HELIX test, vacuum test
• Equipped with standard test interface
• Open top water tank
• European Class B standard
• Triple pulsation vacuum
• LCD display, touch button
• Microcomputer control
Aucma Co., Ltd. was established in 1987 and got listed on A Stock Market of Shanghai Stock Exchange on Dec 29, 2000. Always aiming to be the most reliable refrigeration equipment supplier and refrigeration expert of the world,
We have built up the long term partnership with famous brands like Siemens, Electrolux, Nestle, Coca Cola, Sinopec, with complete set of cold chain solution
In 2014, to help strengthen the refrigerated vaccine supply chain-the "cold chain"-in underserved regions, AUCMA and Global Good have partnered to provide Arktek. Both parties share the same value that saves the children by vaccination for underserve region. In Jan 2015, Arktek acquired WHO-Pre-PQS. Now Arktek move to commercialization stage to demonstrate its essentiality to benefit the people with technologies.
Qingdao Aucma Global Medical Co.,Ltd is the fully-owned subsidiary of Aucma Co.,Ltd.It is responsible for research ,development and sales of medical & scientific equipment.
Our products include Blood Bank Refrigerator, Pharmacy Refrigerator , Ice-land Refrigerator, Deep Freezer (-25ºC,-30ºC,-40ºC) , Ultra Deep Freezer (-60ºC,-86ºC), Heating Cabinet, ArkTek, MetaFridge , Clean Bench, Vertical Steam Autoclave , Tabletop Steam Autoclave .
Complaint
