Description
LDX serious Printing slotting die cutting folding gluing strapping inline
Main specification:
| Model | LDX2400 | LDX2600 |
Machine inside width (mm)
(mm) | 2400 | 2600 |
Max feeding paper siz(mm)
(mm) | 900*2200 | 1200*2400 |
Max effective printing size(mm)
(mm) | 900*2000 | 1200*2200 |
Min coverage size(mm)
(mm) | 350*720mm | 350*720mm |
Design speed(/)
(pcs/min) | 250pcs/min | 200pcs/min |
Max Working speed(/)
(pcs/min) | 0-220 pcs/min | 0-180 pcs/min |
| Standard Thickness of printing plate | 4-6mm | 4-6mm |
| Printing precision | ±0.5mm | ±0.5mm |
| Thickness of cardboard | 2-9mm | 2-9mm |
| Wall thickness | 50mm | 50mm |
| Main motor power | About 30kw | About 30kw |
MACHINE DRAWINGS
Performance and Characteristics
The machine can finish multi processes one time such as: printing, slotting, creasing, trimming, corner cutting, punching, die cutting, gluing
Machine is designed according to high request and reliable function, humanization operation, it can setting, revision, implement, changing and memories in short time, and display data accurately .
All of drive rollers are made of high quality steel with temper and quenching treatment, not change shape when high speed running, hard chrome plated the surface with grinded.
Main drive gears adopt high quality steel with heat treatment with grinded, adopt cross slip system connect each gear, keep gear fix position, ensure transmission precision.
The main drive roller adopt keyless connect, decrease the connection gap, ensure printing precision.
The machine adopts sealed spray lubrication for gear system, engineer oil automatic balance device; keep the oil level equal in each unit.
Motorized digital phase adjustment with "automatic zero return" and "memories" function PLC control with touch screen
Lead edge feeder with vacuum sucntion, easy operate, high precision.
All units move automatic orderly, locked by pneumatic, alarm continually
Main motor is VFD, working stability, low power consumption.
Details of each unit
1,light-pressure lead edge feeder unit
Light pressure Lead edge feeder with vacuum suction, wind is adjustable depend on sheet, make sure feed sheet smoothly.
Main motor with start protecting device, machine cannot run when machine units aren't lock.
Continuous or skip feeding available
Double feed rollers wrapped with rubber, with groove prevent overpressure, reduce pressed sheet
Left-right baffle adjusted by computer with automatic flap, back baffle adjusted by motorized, front baffle manual synchronous adjust.
Dust clearance bush and fan to clean dust on board. Air outlet can be adjusted as per sheet size
Machine units move by motorized and move with alarm belling to make sure safety.
Electronic count can set the production quantity, and reach the quantitative automatic alarm.
Fast change printing plate, with footstep to control cylinder rotate clockwise or anticlockwise
Feed roller, press roller, rubber roller, anilox roller gap adjust with self-lock part
Printing phase adjusted by PLC in 360degree with digital input, do when machine running or stop
Pneumatic brake device to keep printing register fixed, when units separate or clean, brake limit gear rotate, keep original gear position.
Pneumatic lift anilox roller for ink, motorized ink will no dry.
Printing cylinder made of seamless steel pipe, be grinded with chrome plated, do balance treatment, running smooth and steady.
Lift-down design( when feed sheets anilox roller down in order, stop sheet lift rollers in order)
Double diagram pump ink, recycle automatically, clean with water
Memory function, after clean plate it back to original position
Printing precision: +-0.5mm
Printing cylinder horizontal move by motorized The gap between the anilox roller and the plate wheel is adjusted slightly.
Closed cover and recovery ink tank device, easy to clean and leak-proof design.
Option: Ceramic roller+doctor blade,can make machine high printing quality in high speed.
Option:
3,slotting unit
Box height adjusted by motorized.
Slotting phase adjusted by PLC in 360 degree with digital input, do when machine running or stop.
Slotting die and crease die move together by motorized
Crease gap and knife gap adjusted by self-lock mechanism
Collison protection on slotting knife for height adjust and move, don't damage machine
Collison protection for slotting die horizontal move (electronical)
Adopt 5 slotting knife ,it can Achieve trimming while slotting,Slotting knife width 7mm, good quality material, with hot-treatment and grinded, teeth knife, double-piece trim knife, sharpen and precision.
4,Die-cutting unit
Rubber roller: made of good quality steel, be grinded with chrome plated.
Do balance treatment, improve machine running steady
Rubber cylinder is separate with die cylinder by air cylinder when no cutting, reduce no-load and prolong blanket use-life.
Die roller lift-down automatic by pneumatic control( feed sheets roller go up, stop feeding roller down, make sure correct cutting for every sheets)
Rubber roller move 40mm in left and right, wearable average prolong use-life
Rubber roller rotates follow die roller by speed compensation device whatever how rubber diameter change, make sure rubber speed same as wooden die, keep cut box is consist with wooden die.
Planetary gear structure used for phase adjustment.
Phase adjustment by PLC in 360degree with digital input( can be done when run, stop or clockwise or anticlockwise)
Machine have repair roller to grind blanket, so it can use many times.
Equipped with automatic waste cleaning device, waste paper can be discharged automatically
With slotting knife device,electric auto adjust blade, easy to operate,no need to make wooden die when produce regular cartons.
Option:vibration unit
The unit is for removing the waste paper of the carton from die cutting unit
5,Inline automatic folder gluer
The printing slotting die cutting machine is equipped with folder & gluer, which has the advantages of simple structure, high folding precision and beautiful folding.
Its electrical, bearing, belt chain and other important components are used in Japan, Taiwan and other well-known enterprises products.
Machine rail smooth, low noise, high efficiency, simple operation, good safety and reliability, the first choice for enterprises to get rich products.
The average speed of gluing machine is 8000-12000 / hour, with high speed and greatly improved production efficiency.
Automatic gluing, folding, correction, counting and stacking, only two~ three workers can complete the whole process.
Folding beam adopts elastic pressure wheel and suction belt to convey accurately.Two-fold beam man-machine correction, electric adjustment, and with preloading, integral, correction device, so that the carton folding to eliminate the size of the mouth, reduce the rejection rate.
Equipped with rectify deviation device to prevent scissors efficient.
Automatic patching device, paper receiving, stacking and discharging are precisely controlled by servo system with fast circulation speed.It can be moved around according to the folding size of cardboard.
2,Gluing part basic configuration
Gluing part
The position adjustment of gluing head is electric, which can be controlled by human-machine interface
Gluing wheel system function. (automatic glue spraying system is optional)
equipped with gluing roller servo control to coordinate the synchronous operation of the host.
The horizontal movement of rubber roller is adjusted by electric screw rod. The size is controlled by man-machine interface
The gluing part adopts nonstop or gluing system to prevent the glue solidification when the machine starts at the end of a short time,the gap of the upper rubber wheel can be adjusted easily, which can adapt to the gluing of 3-8mm thick paper, and the gluing amount can be adjusted easily.
Folding part
Folding beam electric displacement, human-machine interface control.
The front and rear drive shafts are located at the top of the folding beam.
Equipped with adjustable folding rod.
Equipped with elastic roller for conveying belt.
With lower synchronous conveyor belt.
Equipped with carton guide positive side roller.
With upper belt tension set by cylinder, belt extension can automatically compensate.
The belt speed of upper and lower beams and the speed of slotting machine can be adjusted separately, and the gluing folding belt and conveyor belt are very close to the speed of the slotting machine, avoiding the problem of paper grabbing or blocking between the paste box line and the slotting machine.
The speed of lower belt is separately adjusted by the servo motor, that is, when the upper and lower belt speed is different, it can be adjusted to the same, and micro-adjust for rectify correction.
Adopt belt and rubber covered roller to fold, flexible to adjust the angle of folding and easy to operate.
Preloading degree, using up and down sticks adjustable gap preloading can press 3-8mm paper thick folding box, with man-machine interface for easy adjustment.
Paper stacking section
With air pressure paperboard down, before shooting paperboard paper.
Equipped with electric adjustment stacking department.
With front and rear baffle electric displacement function.
Count and discharge par
the number of cartons per stack can be set from 15~30 for automatic discharge.
equipped with board lifting roller device.
with the paper holder electric adjustment height function.
Electric stacking and aligning of the cardboard, attain totally work automatically.
Adopt electric eye (electric eye signal) to count carton quantity, easy to setting and operate , structure safety and dependable.
electric eye count the stacking quantity, accurate output.
6,Auto Strapping unit
the strapping machine consists of three units. paper conveyer and steering unit,gather align unit and no-man power strapping unit.
This strapping assembly line is a fully automatic strapping assembly line with the integration of machinery, electricity and gas.
Working environment: the relative humidity is less than or equal to 90%, the temperature is 0-40 degrees Celsius, and the noise is less than or equal to 75 dB (A);
The bandwidth is 5 mm(standard) 0r 9 mm (optionally); the tape reel specification: the inner diameter of the paper core with the ring is 200-210 mm, the outer diameter of the belt ring is 400-450 mm, and the band width is 175-190 mm;
Bonding method: hot fusion;
The bonding mode: the bottom is adhered, the bonding surface is more than or equal to 90 percent, the deviation of the bonding position is less than or equal to 2 millimeters
Fast packing speed: PLC control, stable performance, compact packing time, faster.
Technical Parameter
| Model | 1600 |
| Max package size | 2400mmX1600mm*400mm (L * W * H) |
| Belt size | Width 5mm Thickness:0.5-0.55mm |
| Speed | 9-18 units /min |
| Machine weight | 2000kgs |
| Dimensions | 2100*5040*1670mm |
| Transportation speed | 0 -50m / min |
| Air source pressure | 0.5-0.8MPa |
| bundling tightness | 0-45Kg |
DONGGUANG XINGLONG PACKAGING MACHINERY CO., LTD. is specialized in the production of various kinds of carton equipments of the well-know enterprise.
Factory for over twenty years, we introduced advanced technology at home and abroad, developing and manufacturing products, has been well received by customer.
We are specialized in producing 3ply, 5ply, 7ply corrugated cardboard production line, high speed printing machine, ordinary printing machine, single facer, rotary die cutter and other corrugated cardboard production equipment .products are distributed Russia ,the Middle East, Africa, Southeast Asia, EU and other countries and throughout the country. Product quality and enterprise reputation get the high praise at home and abroad.
Over the years the company take "the quality first" "integrity-based" corporate purpose always meet user're-equipments as our sole purpose, providing the products with excellent quality, professional technology. Our company is willing to cooperate with domestic and foreign insight, strive for innovation, coexist win-win, hand in hand altogether will create packaging future.
1. Q: Are you a manufacturer, trading company or a third party?
A: We are a manufacturer, located in Mahai industrial area south of Dongguang county, Hebei province, China. Warmly welcome to visit our company.
2. Q: What is your minimum order quantity, can you send me samples?
A: Our minimum quantity is 1 set, as our product is machinery equipment, it's difficult to send you samples, if you have any questions about the products, please feel free to contact us for more detail, we are glad to provide you more information such as specifications, video, etc.
3. Q: How does your factory do regarding quality controlling?
A: 1) All raw material we used are environmental-friendly
2) Skillful workers care every details in handling the producing and packing process
3) Quality control department are specially responsible for quality in each process
We have been kept providing high quality products by introducing advanced technologies for over 20 years, and our products are also widely exported to many different countries including Russia, the Middle East, Africa, Southeast Asia, EU, etc, which earned us a high reputation among the customers.
4. Q: How about the after-sale service?
A: 1) TM online for 24 hours, also contact by email, skype, MSN, whatsapp, etc.
2) To solve the problems with videos/pictures.
3) One year warranty for spare parts change.
Complaint
