Self-Adhesive Polyethylene Reinforcement Modified Bitumen Waterproof Membrane

Min.Order: 1,000

Product origin: Tianjin, China

Infringement complaint:

Complaint

US$ 1.5 ~ 4.5

Description

The product is a high-quality waterproof product with independent intellectual property rights produced by BNBM group after digestion, absorption and improvement on the basis of a complete set of imported Spanish equipment, technology and formula. It has the characteristics of high elongation, water pressure resistance, corrosion resistance and strong deformation resistance, which is very suitable forunderground waterproof engineering.

Thickness	2.0mm / 3.0mm
Length	15m / 10m
Width	1m
Certificate	ISO9001/14001/45001

-Underground project: basement,metro, tunnel,culvert.

-Roofing: damp-proof and impervious works of buildings.

-Common waterproof layer for planting waterproof works.

- Adhesion method:
On the dry, flat and dust-free base layer, first brush the base treatment agent. After drying, remove the isolation film from the self-adhesive surface of the coil, and then bond directly with the substrate.

- Construction Points:
Substrate should be evenly coated with the base treatment agent, and the coiled material shall be timely paved after drying.
Tear off the bottom isolation material when paving the membrane.
Air under the coiled material shall be exhausted and firmly bonded by rolling.
Waterproof membrane shall be flat and straight, and the lap size shall be accurate.

- Notes:
Do not pave membrane in rainy, snowy or windy weather.
During construction, it is necessary to ensure the cleanliness of surface at the overlap.
When construction at low temperature, hot air should be used to assist the construction of the overlapping part.
Pay attention to the protection of finished products, temporary protection measures should be set on coils for self-adhesive materials.