Complaint
Applications | Automotive, Medical, Consumer Electronics, Military, Aerospace and etc. |
Processing Service | Material Burdening, Melting, Forging, Hot Rolling, Cold Rolling, Slitting, Cold drawing, Cutting off, Rough machining, Heat treatment, 100% magnetic inspection, Fine machining, Final inspection/packaging |
Size | Customized |
Shape | Block, Rod, Disc, Ring, Arc, Customized |
Grade | FeCrCo10/3, FeCrCo12/4, FeCrCo16/2, FeCrCo28/5, FeCrCo30/4, FeCrCo35/5, FeCrCo36/5, FeCrCo44/4, FeCrCo52/5 |
Tolerance | ±1%, Customized |
Magnetism Direction | Length, Width, Thickness, Axial, Diameter, Radial Multi-poles, Customized |
Coating | Nickle, Zinc, Epoxy, Parylene, Gold, Ag, Al, PTFE, Everlube and etc. |
Density | 7.5-7.6g/cm³ |
1.Operating temperature
When the magnet exceeds the specified working temperature, it will cause the magnet to demagnetize or demagnetize. Please use it carefully.
2.Magnetizing direction
The magnet starts from the production of slices, which determines the magnetization direction and working surface of the product, which cannot be changed.
3.Operation Tips
Installation and use: magnets are not iron (iron is cast, like iron wire, with good toughness and continuous falling; magnets are made of powder fired, like ceramic properties, hard but brittle, no toughness, and will break when touched or dropped on the ground), The magnet is made of rare earth alloy crystalline material, which is hard and brittle, and is fragile. After magnetization, it is naturally attracted to each other without external force control, and it is easy to collide and break. Please pay attention to correct installation and use. Sturdy use, please do not use electric work, it is easy to squeeze and cause the magnet to break.
