Complaint
Product name | Ferrite Magnet,Ceramic Magnet-Y30, Y35, Y40, Y30BH, C3, C5, C8 etc | |||
Material | The cheapest magnetic material,main contents including ferric oxide ,barium and strontium. | |||
Grade | Max. Operating Temperatures | |||
Y10T | 250°C | |||
Y25 | 250°C | |||
Y30 | 250°C | |||
Y33 | 250°C | |||
Y35 | 250°C | |||
Y30BH | 250°C | |||
Y35BH | 250°C | |||
Size | Customized size | |||
Shape | Disc,Cylinder,Block,Ring,Countersunk,Segment,Trapezoid and Irregular shapes and more.Customized shapes are available | |||
Feature | A low cost alternative to other magnetic materials, offers relatively high operating temperatures and good resistance to corrosion& demagnetization. However, it has lower energy levels (Br) and is brittle in nature. | |||
Size tolerance | ±0.05mm for diamater /thickness, ±0.1mm for width/ length,which need to contact our engineer! | |||
Applications | Hard ferrite magnets have a wide variety of applications: Speaker Magnets, DC Motors, Sweepers, Magnetic Separators for ferrous materials, Automotive Sensors, MRI's, Reed Switching, Hall Effect Devices, in Assemblies such as (separating, holding, lifting, retrieving, and latching), Refrigerator Magnets and Arts and Crafts as well as many other novelty applications. Hard ferrite must be magnetized in the direction of orientation, which is the same as the direction of pressing. | |||
Description | Ferrite magnet or ceramic magnet is the cheapest magnetic material available with the lowest cost/energy ratio, also known as Ceramic Magnets, they are mainly Strontium based (SrFe2O3), manufactured with Strontium Carbonate additive to increase performances from the obsolete Barium based (BaFe2O3). Their good coercive force results from high crystal anisotropy of Strontium iron oxide. However, isotropic parts can also be produced where a simple and easy multi-pole magnetization is required. The most common shapes are simple, such as blocks,cylinders, rings and arcs. Ferrite is not conductive and has high resistance against corrosion, acids, salts, lubricants. | |||
| Chinese standard | ||||||||
| Material | Br | Hcb | Hcj | (BH)max | ||||
| mT | KGs | KA/m | KOe | KA/m | KOe | KJ/m3 | MGOe | |
| Y10T | 200~235 | 2.0~2.35 | 125~160 | 1.57~2.01 | 210~280 | 2.64~3.52 | 6.5~9.5 | 0.8~1.2 |
| Y20 | 320~380 | 3.2~3.8 | 135~190 | 1.70~2.38 | 140~195 | 1.76~2.45 | 18.0~22.0 | 2.3~2.8 |
| Y22H | 310~360 | 3.1~3.6 | 220~250 | 2.77~3.14 | 280~320 | 3.52~4.02 | 20.0~24.0 | 2.5~3.0 |
| Y23 | 320~370 | 3.2~3.7 | 170~190 | 2.14~2.38 | 190~230 | 2.39~2.89 | 20.0~25.5 | 2.5~3.2 |
| Y25 | 360~380 | 3.6~4.0 | 135~170 | 1.70~2.14 | 140~200 | 1.76~2.51 | 22.5~28.0 | 2.8~3.5 |
| Y26H | 360~390 | 3.6~3.9 | 220~250 | 2.77~3.14 | 225~255 | 2.83~3.21 | 23.0~28.0 | 2.9~3.5 |
| Y27H | 370~400 | 3.7~4.0 | 205~250 | 2.58~3.14 | 210~255 | 2.64~3.21 | 25.0~29.0 | 3.1~3.7 |
| Y30 | 370~400 | 3.7~4.0 | 175~210 | 2.20~2.64 | 180~220 | 2.26~2.77 | 26.0~30.0 | 3.3~3.8 |
| Y30BH | 380~390 | 3.8~3.90 | 223~235 | 2.80~2.95 | 231~245 | 2.90~3.08 | 27.0~30.0 | 3.4~3.7 |
| Y30-1 | 380~400 | 3.8~4.0 | 230~275 | 2.89~3.46 | 235~290 | 2.95~3.65 | 27.0~32.0 | 3.4~4.0 |
| Y30H-2 | 395~415 | 3.95~4.15 | 275~300 | 3.46~3.77 | 310~335 | 3.90~4.21 | 28.5~32.5 | 3.5~4.0 |
| Y32 | 400~420 | 4.0~4.2 | 160~190 | 2.01~2.38 | 165~195 | 2.07~2.45 | 30.0~33.5 | 3.8~4.2 |
| Y33 | 410~430 | 4.1~4.3 | 220~250 | 2.77~3.14 | 225~255 | 2.83~3.21 | 31.5~35.0 | 4.0~4.4 |
| Y35 | 400~410 | 4.00~4.10 | 175~195 | 2.20~2.45 | 180~200 | 2.26~2.51 | 30.0~32.0 | 3.8~4.0 |
| USA standard | ||||||||
| Material | Br | Hcb | Hcj | (BH)max | ||||
| mT | KGs | KA/m | KOe | KA/m | KOe | KJ/m3 | MGOe | |
| C1 | 230 | 2.3 | 148 | 1.86 | 258 | 3.5 | 8.36 | 1.05 |
| C5 | 380 | 3.8 | 191 | 2.4 | 199 | 2.5 | 27 | 3.4 |
| C7 | 340 | 3.4 | 258 | 3.23 | 318 | 4 | 21.9 | 2.75 |
| C8(=C8A) | 385 | 3.85 | 235 | 2.95 | 242 | 3.05 | 27.8 | 3.5 |
| C8B | 420 | 4.2 | 232 | 2.913 | 236 | 2.96 | 32.8 | 4.12 |
| C9 | 380 | 3.8 | 280 | 3.516 | 320 | 4.01 | 26.4 | 3.32 |
| C10 | 400 | 4 | 288 | 3.617 | 280 | 3.51 | 30.4 | 3.82 |
| C11 | 430 | 4.3 | 200 | 2.512 | 204 | 2.56 | 34.4 | 4.32 |
Different Shapes of Ferrite Ceramic Magnets
The magnetization direction of the magnet would be determined during pressing. The magnetization direction of the finished product cannot be changed. Please be sure to confirm the required magnetization direction.
↓
Magnetism Direction
Different Types of Coating for Neodymium Magnets
Our Factory
Quality Control
1. Magnet will be inspected strictly during every process of production.
2. Every magnet will have a certificate before delivery.
3. Magnetic Flux report and Demagnetization Curve could be offered according to request.
Packing & Delivery
Our regular product packaging is shown as in the following pictures, which could be customized. If shims, N-Pole or S-Pole marks or other things are required, please contact us.
Application
Why Choose Us
Reviews from our customers:
FAQ
Q1: Can I have a sample order for Neodymium magnet?
A: Yes, we welcome sample order to test and check quality. Low MOQ of 1pc for sample checking is available.Mixed samples are acceptable. Please cover the freight.
