FFU Fan Filter Unit The HEPA Filter System Ceiling of Cleanroom

Min.Order: 1

Product origin: Shenzhen, Guangdong, China

Infringement complaint:

Complaint

US$ 80 ~ 175

Description

Ultra thin FFU is generator set with super thin motor inside which is used in the turbulent layer and laminar flow clean room, where have limited installation space. Its speed can also reach to 0.45m/s ±20% same as other FFU.

It is 100mm thinner than the ordinary FFU.The material of cabinet is stainless steel, Galvanized steel with aluminum painting, Cold rolled steel with epoxy powder and so on. It is lighter, corrosion-resistance, rust-resistance and beautiful.

Feature
1. Overheating protection

Inside equipped with overheating protection, the surface is smooth and bright, lower air resistance and good sound insulation. Special air entrance design can low down the noise effectively .

2. The average air velocity increase to 25% Long-life span, energy-saving, low noise, less maintenance, small vibration and adjustable speed. The average air velocity increase to 25%.

3. Life-long span It works as an average air speed of 0.45m/s. The outlet speed is stable and can shorten the period the replace filters. In the meantime, it can extend the service life of fans.

4. Space-saving

Light and convenient, easy and beautiful design. Let the using space reduced largely and the efficiency is higher. Not only improve the scope and space, but also energy saving.
• Voltage: 120/240 V
• Material: Stainless Steel
• Size: 2'x2', 2'x3', 2'x4'
• Filter: ULPA, HEPA
• Filter Replacement Access: Room-Side, Top Side

Key Techgnical Parameters:

FFU measurement(mm )	575575190	1175575190
Filter Measurement (mm)	57057069	117057069
Rated Air Flow(m3/h)	500	1000
Power Consumption(W)	70-110	150-180
Noise Level (dB)	48-52	49-54
Resistance @0.45 (m/s)	230	290
Power consumption(A)	0.33-0.51	0.69-0.82
Air Velocity(m/s)	0.3-0.5
Filtration Rating		H13 (optional from H13-U17)
Power Supply		220V/50HZ
Method of Control	Shift adjustment /Infinite variable adjustment /Group control adjustment
Casing Material	Aluminum Coated Zinc Plate/Stainless Steel/Pre-coated Aluminum Plate