Complaint
| TYPE | Production Flow Rate GPD(m³/d) | Stable Rejection Rate | Operation Pressure | Recovery Rate |
| 4040-LP | 2400(9.1) | 99.5% | 225 psi (15bar) | 15% |
| 4040-ULP | 2400(9.1) | 99.2% | 150 psi (10bar) | 15% |
| 4040-XLP | 2400(9.1) | 98.5% | 100 psi (7bar) | 15% |
| 8040-LP | 10500(40) | 99.5% | 225 psi (15bar) | 15% |
| 8040-ULP | 10500(40) | 99.2% | 150 psi (10bar) | 15% |
| 8040-XLP | 10500(40) | 98.5% | 100 psi (7bar) | 15% |
| LP(Low Pressure) | ULP(Ultra Low Pressure) | XLP(Extra Low Pressure) | |
| Test Conditions | 2000 ppm Nacl Solution 225 psi Applied Pressure 77F (25ºC)Operation Temperature 15% Pemeate Recovery 6.5-7.5 PH Range | 1500 ppm Nacl Solution 150 psi Applied Pressure 77F (25ºC)Operation Temperature 15% Pemeate Recovery 6.5-7.5 PH Range | 1500 ppm Nacl Solution 100 psi Applied Pressure 77F (25ºC)Operation Temperature 15% Pemeate Recovery 6.5-7.5 PH Range |
| Type | Configuration: Low Pressure Spiral Membrane Polymer: Composite polyamide Membrane O Ring: EPDM | ||
| Maximum Operating Temperature | 113ºF(45ºC) |
| Maximum Working Pressure | 600psi(41.0 bar) |
| The high pressure drop | 15psi (1.0bar) |
| Continuously operating PH range a | 3-10 |
| Short wash PH range (30min) b | 2-12 |
| Maximum feed water SDI | SDI 5 |
| Tolerance Of Free Chlorine | <0.1ppm |
| Maximum pressure drop for single membrane element | 15psi(0.1Mpa) |
