Complaint
Features
PA6 has similar chemical and physical properties to PA66, however, it has a lower melting point and a wide range of process temperatures. It has better impact and solubility resistance than PA66, but it is also more hygroscopic. Because many quality characteristics of plastic parts are affected by moisture absorption, so the use of PA6 design products to take this into full consideration. In order to improve the mechanical properties of PA6, various modifiers are often added. Glass is the most common additive, and synthetic rubber, such as EPDM and SBR, is sometimes added to improve impact resistance. For products without additives, the shrinkage rate of PA6 is between 1% and 1.5%. Adding a fiberglass additive reduces shrinkage to 0.3%(but slightly more perpendicular to the process). The shrinkage of molding and assembly is mainly affected by crystallinity and hygroscopicity of materials.
The technical parameters
| PA6 chips | ||
| Brand/Grade | Relative viscosity | Features & Usage |
| YH800 | 2.85±0.03 | Medium viscosity, suitable for injection molding, flame retardant modification and spinning brown silk, monofilament, etc. |
| YH700 | 2.75±0.03 | Medium viscosity, suitable for injection molding, flame retardant modification and spinning brown silk, monofilament, etc. |
| LX275 | 2.75±0.03 | Medium viscosity, general purpose grade, bright chips |
| JQC-2750 | 2.75±0.03 | Used in fishing net, spinning, injection molding, packaging materials, etc., also used in modified plastic base material, after modified by glass fiber reinforced flame retardant, widely used in electrical appliances, machinery, electronics, automobile and other industries. |
| 1013B | 2.75±0.02 | Used in auto parts, power tools, sockets, building materials, hardware, fishing nets, spinning, plastic modification, packaging materials and other injection molding products. |
| M2500I | 2.5 | Medium viscosity , bright chips, direct injection, rapid prototyping, Good mold release performance |
| YH600 | 2.55 | Suitable for reinforcing modification, alloy and spinning brown silk, fishing net, etc. The characteristic molecular weight is moderate. |
| YH400 | 2.43 | Low viscosity, wear resistance, high flow, for electrical appliances and automotive applications |
| YH3400 | 3.40±0.03 | High viscosity, suitable for industrial silk, packaging film and high strength wear-resistant structural parts |
| BL1340H | 3.35±0.05 | High viscosity, home appliance automotive applications |
| BL2280H | 2.71 | Food grade high temperature resistant electronic and electrical parts, injection molding |
| BL2280Z | 2.70±0.03 | Uses: auto parts, electrical and electronic plug-ins, mechanical parts, baby carriage parts, wear-resistant pulleys, gears, ties and their complex shape products. Features: good fluidity, easy demoulding, short molding cycle, good dimensional stability, good mechanical properties, excellent comprehensive performance, can replace similar products: 1013B \ F223-D \B3S \ M2500I \ B30S |
| BL3240H | 2.48 | High flow, low viscosity, fiber grade, injection molding, spinning, application: fitness equipment, thin wall products, wire, home appliance parts, automotive applications, power tools, electrical and electronic parts, cable, general purpose. |
| Toughened / Reinforced / Flame-retardant PA6 | ||
| Grade | Filler | Features & Usage |
| WBG35H | 35% Glass fiber | high speed turntable 8000 RPM for garden machinery, agricultural applications, industrial machinery |
| WB3H-4 | / | For high torque screw, nut, shaft, shaft, gear and other super strength industrial parts, injection molding and extrusion |
| BAL30Z | / | Extrusion grade, used for all kinds of vehicle oil pipe, also can be used for injection molding for other need toughness, softness products |
| B25Z-20/40/60 | Impact modified | Impact modified nylon 6 can be used for cold-resistant products and industrial parts of -20, -40, -60ºC |
| BFRG33XH | 33% Glass fiber, Red phosphorus flame retardant | Used for environmental protection, halogen-free, high flame retardant, anti-warping, need high strength, anti-fatigue electronics, electrical appliances and other industrial components |
| BG15 | 15% Glass fiber | Easy injection molding, rapid prototyping; Used for electronic appliances and medium - rigid thin - wall industrial parts. Good surface finish. |
| BG33H | 33% Glass fiber | Easy injection molding, used for electronic and electrical skeleton and high rigidity and thermal stability of industrial parts, fan blades and electrical insulation parts, good surface finish. |
| BG50 | 50% Glass fiber | Used for high rigidity, low warping, high strength, heat resistant electronic and electrical industrial parts and fan blades, can replace long glass fiber reinforced nylon 6; The surface is smooth and clean. |
| BG10Z | 10% Glass fiber | used for industrial parts that require cold resistance, uv resistance, rigidity and toughness |
| BG2010 | 30% Glass fiber | Used for high strength, high rigidity, hardness, and dimensional stability of the components, window decoration special materials |
| BG30C8 | 30% Glass fiber | Hydrolysis resistance, cold resistance, used for water pumps, water meters, pipe joints, etc |
| BG30HUV1 | 30% Glass fiber | Heat resistance, weather resistance, uv resistance, used for car door handle, reflector base and other outdoor parts |
| BG30W | 30% Glass fiber | No drying, direct injection molding, stable size, rapid molding; Good surface finish; Used for high precision parts. |
| BG30Z-30 | 30% Glass fiber | Impact modified. Used for industrial parts requiring strength and toughness. Cold resistance -40 ºC |
| BG33HSL | 33% Glass fiber | Used for high rigidity, high strength, stable size, long-term heat resistant electronic and electrical industrial components; Uncolored HSL grade, without the addition of color, the final product after injection molding will be light green |
| BG33HFL | 33% Glass fiber | Ultra high liquidity; Used for ultra-thin parts and high-precision electrical industrial parts with complex shapes |
| BG35FWUV | 35% Glass fiber | Uv aging resistance, high strength, high rigidity, good uv linear resistance, used for outdoor industrial components. |
| BG40Z | 40% Glass fiber | used for rigid and impact-resistant parts of automobile and machinery industry. It can resist fatigue, weather and low temperature. Can replace DSM K224-PG8 |
| BG40H8 | 40% Glass fiber | Impact modified. Can replace reinforced PA66 |
| BG55L | 55% Glass fiber | With high strength and rigidity, can be used for complex parts, good surface finish |
| BG65L | 65% Glass fiber | With high strength and rigidity, can be used for complex parts, good surface finish |
| BG70H | 70% Glass fiber | For industrial parts requiring ultra-high rigidity, can replace metal materials |
| 5020T | / | Toughened, high toughness, high impact resistance, low temperature -40ºC, application: electronic appliances, industrial machinery, automobile parts, injection molding |
1.Packing:
In 25kg PP woven bag, or per your requirement.
2.Storage:
The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.
3.Transportation:
During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.
Q1: Are you trading company or manufacturer?
We are factory.
Q2 : Can I take a look at some samples first?
Yes, of course! We could provide free samples for you.
Q3 : Do you accept customization?
OEM can be acceptable.We can produce according to your indicators.
Q4 : What is your payment terms?
T/T, Western Union, Paypal etc.
