IEC61034-1 Smoke Density Measuring Device Cable Smoke Density Testing Equipment Introduction In accordance with GB/T17651.1~2, IEC61034-1~2 "cable or optical cable burning under specific conditions of smoke density determination" part 1 "test equipment" and part 2 "test procedures and requirements".The measurement of smoke density is an important aspect to evaluate the combustion characteristics of cable or optical cable, which is related to the evacuation of personnel and the determination of whether close to fire extinguishing.This instrument is mainly used to determine the smoke concentration of the cable and optical cable when burning under specific conditions, and to verify the smoke density.In the flame combustion or flameless combustion conditions, transmittance is used as a comparison of different cables or optical cable under specific conditions of a determination.
IEC61034-1 Smoke Density Measuring Device Cable Smoke Density Testing Equipment Features: The instrument involves mechanical, optical, electronic three aspects of professional knowledge, is the integration of mechanical and electrical products, has the advantages of reasonable structure, stable performance, easy operation;Windows XP operation interface, LabVIEW style, perfect security mechanism.During the test, the measurement results can be displayed in real time and the perfect curve can be drawn dynamically (displaying the transmission rate and time curve). The data can be permanently saved, read and printed out, and the report can be printed directly. Measurement software: it is in Windows XP+VB6.0 operation interface, can test the main data smoke optical density, specific optical density, smoke generation rate, maximum smoke generation rate, average smoke density, etc.Also has the calibration, editing, testing, parameter adjustment and other operation interface.The program adopts computer automatic control, collection, record and result settlement.
IEC61034-1 Smoke Density Measuring Device Cable Smoke Density Testing Equipment Detailed technical parameters: 1. Combustion chamber: inner size: 3M× 3M× 3M, a total of 27 cubic meters.Can be brick wall structure, also can be steel plate structure, by the customer's choice. 2, light measuring device: A, light source imported quartz halogen lamp: nominal power 100W, nominal voltage: 12V, nominal light return: 2000-3000LM B. Receptor: silicon photocell, light transmittance of 0% is no light through, light transmittance of 100% light without blocking completely through. 3. Standard ignition source: A. The ignition source is 1.0L alcohol B. Alcohol plate: stainless steel, bottom side 210×110mm, Top surface 240×140mm, height 80mm 4. Mixing of smoke: the use of desktop fans to make the smoke evenly distributed in the combustion chamber. 5. Blank test: burn the alcohol lamp to make the temperature of the combustion chamber reach 25±5ºC. 6, temperature measuring device: in the door surface from the ground height of 1.5m, A temperature sensor is installed 0.5M away from the wall. 7, including a set of transmittance measurement software, can output curves and reports. 8, including a computer (printer) 9, power: 220V, 4KW.(The total power of the equipment should be indicated) 10, (smoke density) 0-924 six automatic shift gear 11. Measuring range: 0.0001 -- 100%; 12, measuring accuracy: + 3%; 13. Working voltage: 200-240V 50HZ; 14, ambient temperature: room temperature - 40ºC 15, relative temperature: ≤85%; 16, working environment: when the instrument is running, should avoid direct light, and there is no forced air flow phenomenon.