10kv Resin Insulated Dry Type Transformer for Power Distribution Low Voltage Sc (B) Series Outside Switchgear Enclosure

Min.Order: 3

Product origin: Chongqing, China

Infringement complaint:

Complaint

US$ 50 ~ 500

Description

The epoxy resin insulated dry-type transformer provided by our company has the following characteristics:
Resistance to short circuit and strong weather resistance: foil coil is used at low pressure, segmenting cylinder coil is used at high pressure, the coil is poured in epoxy resin, and the coil adopts advanced directional gel technology, so that epoxy resin gel reaction is thorough without stress accumulation. Excellent mechanical strength and weather resistance.
Strong overload capacity, good flame retardant: the use of international advanced saturated packing thin insulation epoxy resin vacuum casting technology, so that the product has greater heat dissipation capacity and good flame retardant performance.
High heat resistance grade: H grade epoxy resin is adopted, which has better heat resistance.
Small local discharge: vacuum pouring pressure infiltration process and uniform field strength design, avoid residual bubbles during pouring, local discharge is very small.
Environmental adaptability: the packed epoxy resin material is closer to the thermal expansion coefficient of the coil conductor, the temperature or load fusion will not cause cracking of the resin, and the dense epoxy resin insulation layer has 100% moisture and water resistance.

Environmental conditions:
1.Environment: indoor
2.Altitude: below 1000m
3.Earthquake intensity: 8 degrees
4.Ambient temperature: -25ºC - +40ºC
5.pollution level: according to provisions of GB/T16434-1996 3 pollution level, the leakage distance not less than 2.5 cm/kV (highest working voltages).

General technical parameters

project	unit	Technical parameters
The rated voltage	KV	10(20,35)/ 0.4
frequency	Hz	50 / 60
Tapping range		±2x2.5%
Insulation grade		F
Local discharge	PC	<10
Insulation level	KV	10KV LI75AC35/AC3
		20KV LI125AC55/AC3
		35KV LI200AC85/AC3
Noise level	dB	JB/T10888
Cooling way		AN/AF
Protection grade		IP20
Short circuit capacity		GB1094.5
Mode of operation		Operation mode

1.1 SC(B)10 series 10kV resin insulated dry type power transformer technical parameters

Product standard		GB/T10228-2015
		GB1094.11-2007
		GB/T1094.12-2013
Capacity Sr	Short-circuit impedance Uk%	No-load loss Po	Load loss Pw	No-load current Io%	connetion symbol	Voltage kV		Tapping range	NVH	Insulation grade
kVA	%	(W)	120ºC(W)	%	connetion symbol	H.V.	L.V.	Tapping range	dB	Insulation grade
30	4	190	710	2	Yyn0 OR Dyn11	11 10.5 10 6.3 6	0.4	±5% ±2×2.5%	63	F
50		270	1000	2					63
80		370	1380	1.5					65
100		400	1570	1.5					65
125		470	1850	1.3					66
160		540	2130	1.3					66
200		620	2530	1.1					67
250		720	2760	1.1					67
315		880	3470	1					69
400		980	3990	1					69
500		1160	4880	1					70
630		1340	5880	0.85					71
630	6	1300	5960	0.85					71
800		1520	6960	0.85					72
1000		1770	8130	0.85					72
1250		2090	9690	0.85					74
1600		2450	11700	0.85					75
2000		3050	14400	0.7					77
2500		3600	17100	0.7					78
1600	8	2450	12900	0.85					75
2000		3050	15900	0.7					77
2500		3600	18800	0.7					78

1.2 SC(B)11 series 10kV resin insulated dry type power transformer technical parameters

Product standards		GB/T10228-2015					L.V. KV				0.4
Product standards		GB1094.11-2007					L.V. KV				0.4
Insulation grade		F					Tapping range				±5% OR ±2×2.5%
H.V. kV		11,10.5,10,6.3,6					connetion symbol				Yyn0 OR Dyn11
Capacity Sr	Short-circuit impedance Uk%	No-load loss Po	Load loss Pw	No-load current Io%	Sound power level NVH	Weight G.W.	L	B	H	l	b	h	m	k	d	g
kVA	%	W	120ºC(W)	%	dB	kg	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm
30	4	170	710	1.8	63	345	1250	1050	1200	935	620	1013	400	275	225	280
50		240	1000	1.8	63	440	1250	1050	1200	955	620	1041	400	300	235	290
80		330	1380	1.3	65	550	1300	1050	1200	970	620	1059	550	320	240	295
100		360	1570	1.3	65	625	1350	1050	1250	990	620	1087	550	325	245	300
125		420	1850	1.1	66	780	1350	1100	1250	1010	620	1102	550	335	255	310
160		490	2130	1.1	66	1000	1400	1100	1300	1030	620	1118	550	345	260	315
200		560	2530	1	67	1140	1450	1100	1350	1060	710	1135	660	350	265	320
250		650	2760	1	67	1360	1500	1150	1400	1100	710	1159	660	365	275	325
315		790	3470	0.9	69	1580	1500	1200	1450	1150	710	1194	660	375	280	330
400		880	3990	0.9	69	1850	1600	1250	1600	1260	870	1284	660	400	320	360
500		1040	4880	0.9	70	2160	1600	1300	1650	1290	870	1355	820	410	325	365
630	6	1170	5960	0.75	71	2275	1700	1300	1650	1340	870	1340	820	445	310	350
800		1370	6960	0.75	72	2680	1900	1300	1800	1550	870	1570	820	480	330	375
1000		1590	8130	0.75	72	3290	1850	1300	1850	1550	870	1620	820	490	330	375
1250		1890	9690	0.75	74	3790	1950	1300	1950	1570	870	1714	820	515	365	399
1600		2210	11730	0.75	75	4800	2000	1400	2100	1650	1120	1787	1070	535	380	420
2000		2750	14450	0.75	77	5680	2150	1500	2200	1770	1120	1859	1070	580	405	430
2500		3240	17170	0.6	78	6770	2200	1500	2200	1870	1120	1944	1070	605	425	440
1600	8	2210	12960	0.6	75	4800	2000	1400	2100	1650	1120	1787	1070	535	380	420
2000		2750	15960	0.75	77	5680	2150	1500	2200	1770	1120	1859	1070	580	405	430
2500		3240	18890	0.6	78	6770	2200	1500	2200	1870	1120	1944	1070	605	425	440

1.3 Technical parameters of 10kV class resin insulated dry type on-load voltage regulating power transformer

Product standard		GB/T10228-2015
		GB1094.11-2007
		GB/T1094.12-2013
Capacity Sr	Short-circuit impedance Uk%	No-load loss Po	Load loss Pw	No-load current Io%	connetion symbol	Voltage kV		Tapping range	NVH	Insulation grade
kVA	%	(W)	120ºC(W)	%	connetion symbol	H.V.	L.V.	Tapping range	dB	Insulation grade
315	4	990	3610	1.1	Yyn0 Dyn11	11 10.5 10 6.3 6	0.4	±3×2.5%±4×2.5%	69	F
400		1125	4275	1.1					69
500		1296	5225	1.1					70
630		1494	6175	1					71
630	6	1440	6365	1					71
800		1710	7505	1					72
1000		1980	8788	0.85					72
1250		2340	10450	0.85					74
1600		2727	12445	0.85					75
2000		3420	15200	0.7					77
2500		3960	18145	0.7					78

1.4 Technical parameters of 20kV class resin insulated dry type on-load voltage regulating power transformer

Product standard		GB/T10228-2015
		GB1094.11-2007
		GB/T1094.12-2013
Capacity Sr	Short-circuit impedance Uk%	No-load loss Po	Load loss Pw	No-load current Io%	connetion symbol	Voltage kV		Tapping range	NVH	Insulation grade
kVA	%	(W)	120ºC(W)	%	connetion symbol	H.V.	L.V.	Tapping range	dB	Insulation grade
50	6	340	1230	2	Yyn0 Dyn11	20 22 24	0.4	±5% ±2×2.5%	64	F
100		540	1990	1.8					65
160		670	2470	1.5					66
200		730	2940	1.5					68
250		840	3420	1.3					68
315		970	4080	1.3					70
400		1150	4840	1.1					70
500		1350	5790	1.1					70
630		1530	6840	1					72
800		1750	8260	1					72
1000		2070	9780	0.85					72
1250		2380	11500	0.85					76
1600		2790	13800	0.85					76
2000		3240	16300	0.8					78
2500		3870	19300	0.8					78
2000	8	3240	17800	0.8					78
2500	8	3870	21200	0.8					78

1.5 Technical parameters of 35kV class 10 resin insulated dry type power transformer

Capacity Sr	Short-circuit impedance Uk%	No-load loss Po	Load loss Pw	No-load current Io%	connetion symbol	Voltage kV		Tapping range	NVH	Insulation grade
kVA	%	(W)	120ºC(W)	%	connetion symbol	H.V.	L.V.	Tapping range	dB	Insulation grade
50	6	450	1420	2.3	Yyn0 Dyn11	33 35 36.5 38.5	0.4	±5% ±2×2.5%	64	F
80		550	1820	2.3					64
100		630	2090	2					65
160		790	2810	1.5					66
200		880	3320	1.5					68
250		990	3800	1.3					68
315		1170	4510	1.3					70
400		1370	5410	1.1					70
500		1620	6650	1.1					70
630		1860	7690	1					72
800		2160	9120	1					72
1000		2430	10400	0.75					72
1250		2830	12700	0.75					76
1600		3240	15400	0.75					76
2000		3820	18200	0.75					78
2500		4450	21800	0.75					78
800	6	2250	9400	0.95	Yyn0 Dyn11 Yd11		3.15 6 6.3 10 10.5 11		72
1000		2670	10900	0.95					72
1250		3130	12900	0.85					76
1600		3690	15400	0.85					76
2000	7	4230	18200	0.75					78
2500	7	4860	21800	0.75					78
3150	8	6030	24500	0.7					78
4000		7020	29400	0.7					85
5000		8370	34900	0.6					85
6300		9900	40800	0.6					85
8000	9	11300	46000	0.5	Dyn11 YNd11 Yd11				88
10000		12900	55500	0.5					88
12500		15700	64600	0.4			6 6.3 10 10.5 11		88
12500		15700	64600	0.4					88
16000		19300	76000	0.4					93
20000	10	22900	85500	0.35					93
25000	10	27100	101000	0.35					93

1.6 SC(B)H15 series 10kV class resin insulated amorphous alloy dry distribution transformer technical parameters table

Product standards		GB/T10228-2015,GB/T22072-2018,GB/T1094.12-2013			L.V. KV			0.4
Insulation grade		F			Tapping range			±5% OR ±2×2.5%
H.V. kV		11,10.5,10,6.3,6			connetion symbol			Yyn0 OR Dyn11
Capacity Sr	Short-circuit impedance Uk%	No-load loss Po	Load loss Pw	No-load current Io%	Sound power level NVH	Weight G.W.	l	b	h	m	k	d	g
kVA	%	W	120ºC(W)	%	dB	kg	mm	mm	mm	mm	mm	mm	mm
30	4	70	710	0.6	60	345	935	620	1013	400	275	225	280
50		90	1000	0.5	60	440	955	620	1041	400	300	235	290
80		120	1380	0.5	62	550	970	620	1059	550	320	240	295
100		130	1570	0.5	62	625	990	620	1087	550	325	245	300
125		150	1850	0.4	63	780	1010	620	1102	550	335	255	310
160		170	2130	0.4	63	1000	1030	620	1118	550	345	260	315
200		200	2530	0.4	64	1140	1060	710	1135	660	350	265	320
250		230	2760	0.4	64	1360	1100	710	1159	660	365	275	325
315		280	3470	0.3	66	1580	1150	710	1194	660	375	280	330
400		310	3990	0.3	66	1850	1260	870	1284	660	400	320	360
500		360	4880	0.3	67	2160	1290	870	1355	820	410	325	365
630		420	5880	0.3	68	2265	1340	870	1340	820	445	310	350
630	6	410	5960	0.3	68	2275	1340	870	1340	820	445	310	350
800		480	6960	0.3	69	2680	1550	870	1570	820	480	330	375
1000		550	8130	0.2	69	3290	1550	870	1620	820	490	330	375
1250		650	9690	0.2	71	3790	1570	870	1714	820	515	365	399
1600		760	11730	0.2	72	4800	1650	1120	1787	1070	535	380	420
2000		1000	14450	0.2	74	5680	1770	1120	1859	1070	580	405	430
2500		1200	17170	0.2	75	6770	1870	1120	1944	1070	605	425	440
1600	8	760	12960	0.2	72	4950	1730	1120	1880	1070	560	400	440
2000		1000	15960	0.2	74	5850	1860	1120	1950	1070	610	430	450
2500		1200	18890	0.2	75	6973	1960	1120	2040	1070	640	450	460

Chongqing Lianwei Power Technology development Co., Ltd.(Tongxun Power Industry Co., Ltd.) was established in April 1989, located in Lidu Industrial Park, Fuling District, Chongqing. It has a 30-year history of production and development of complete electrical equipment. The company's predecessor is Fuling Three Gorges Electric Appliance Factory of Chongqing Yuneng Group, which was later assigned to Chongqing East Asia Group. In 2006, it was transformed into Chongqing Dixun Electric Technology Co., Ltd. and in 2013, it was renamed Chongqing Taiwei Electric Equipment Co., Ltd. in October 2015, it was reorganized into Chongqing Lianwei Power Technology development Co., Ltd.(Tongxun Power Industry Co., Ltd.)with wholly-owned subsidiaries of Lanzhou Changyao Distribution Engineering Co., Ltd., Lanzhou Guowei Power Supply Co., Ltd. and Chongqing Lianwei Power Technology Development Co., Ltd. The company is a group with integrated the general contracting of electric power projects, the loading, repairing, testing, manufacturing of electric power equipment, operation and maintenance of electric power systems and import and export trade.

Since 1989, being in line with the "Honesty and Trustworthy, customer first" corporate purpose and adherence to the "innovative, pragmatic, pioneering and enterprising" spirit, the company has shaped the "integrity, excellence, exquisite, value" brand image. Since 2000, the company has been successively awarded the following honorary titles: "Quality Designated Demonstration Unit", "Chongqing Famous Product", "Best District Civilization Unit", "A Class Taxpayer", and "National Quality Stable Qualified Product". The company has one patent for invention and six patents for utility model.

Chongqing Lianwei Power Technology development Co., Ltd.(Tongxun Power Industry Co., Ltd.) is looking forward to working with you to create a bright and brilliant tomorrow with good corporate reputation, excellent .

Tajikistan dangora 220KV substation
Katabang thermal power plant, Indonesia
Coal-fired power plant in riau, Indonesia
Vietnam north electric co. 's Hanoi van doon substation
East timor substation for Chinese nuclear industry
China institute of engineering physics
Xi 'an, China aviation industry corporation
Panzhihua xingang vanadium titanium xichang production
base
Longdong hydropower station in ya 'an, sichuan province
Batang langda hydropower station in ganzi prefecture
Sichuan guangan forward substation
Xiaojin county jiesigou secondary hydropower station
Luzhou hejiang longtan substation
Yunnan diqing north substation
Country garden lanzhou new city project
Country garden lanzhou new district project
Deyang country garden, sichuan
Nanchong country garden, sichuan
Guiyang poly group
Chongqing poly group
China railway group fuling beishan new town project
Raffles plaza, chongqing
Chongqing jiangbei international airport
Datang international wulong xingshun wind farm
Xiuzhou photovoltaic power generation project in jiaxing
Jiangsu dongtai photovoltaic power project
Guizhou kaiphosphorus holding group co. LTD
Chongqing jianfeng group
Chongqing huafeng group
Chongqing nanfu aluminum industry
Chongqing changjiang normal university
Chongqing vocational and technical college of industry
and trade
Chongqing university
Chongqing jiaotong university
Chongqing rail transit group
Chongqing electromechanical group
Chongqing changan group
Chongqing iron and steel group longevity production base
construction project
Chongqing wanda sheet fuling production base
Chongqing leading port construction project
Chongqing fuling gaishan bay traffic hub
Chongqing fuling sewage treatment plant
Sichuan guangyuan sewage treatment plant

Forward

Related products

10kv Resin Insulated Dry Type Transformer for Power Distribution Low Voltage Sc (B) Series Outside Switchgear Enclosure

US$ 50 ~ 500

10-35kv Resin Insulated Dry Type Transformer for Power Distribution Low Voltage Sc (B) Series Outside Switchgear Enclosure

US$ 30 ~ 300

250kVA/10kv/0.4kv Resin Insulated Dry Type Transformer for Power Distribution Low Voltage Sc (B) Series Power Transformer

US$ 6066.21

35kv Resin Insulated Dry Type Transformer for Power Distribution Low Voltage Sc

US$ 800 ~ 3000

Hot Selling Sc (B) 10 Series 33~38.5kv Cast Resin Insulation Low Power Lose Three Phase Dry-Type Distribution Power Transformer

US$ 1000 ~ 50000

125kVA/10kv Electrical Power Distribution Epoxy Resin Cast Dry-Type Power Voltage Transformer

US$ 5755.78

Low on-Load Loss Sc (B) Series Cast-Resin Dry Type Power Transformer 30kVA 50kVA, 80kVA 100kVA 315kVA 400ka

US$ 1000

Sc (B) 11-315/10 Three Phase Epoxy Resin Pouring (Cast Resin) Dry Type Power Distribution Electric High Voltage Frequency Transformer for Transmission

US$ 1000 ~ 200000

Customers Also viewed

6kv/10kv Three Phase Epoxy Resin Pouring (Cast Resin) Dry Type Power Distribution Electric High Voltage Frequency Transformer for Transmission

US$ 1999 ~ 5999

6kv/10kv Three Phase Epoxy Resin Pouring (Cast Resin) Dry Type Power Distribution Electric High Voltage Frequency Transformer for Transmission

US$ 1 ~ 999

10kv Three Phase Epoxy Resin Pouring (Cast Resin) Dry Type Power Distribution Electric High Voltage Frequency Transformer for Transmission

US$ 1000 ~ 200000

6kv 10kv Three Phase Epoxy Resin Pouring Cast Resin Dry Type Power Distribution Electric High Voltage Frequency Transformer for Transmission

US$ 2100 ~ 2260

10kv 50kVA Scb12 Three Phase Epoxy Resin Pouring (Cast Resin) Dry Type Power Distribution Electric High Voltage Frequency Transformer for Transmission

US$ -1

Product Tag:

Related categories:

Voltage Transformer Transformer Power Transformer Transformer Power Supply Transformer Current Low Power Transformer

Scroll to Top

Categories

10kv Resin Insulated Dry Type Transformer for Power Distribution Low Voltage Sc (B) Series Outside Switchgear Enclosure

Connect with us

Categories

Shopping bag