Complaint
Auto Car Diagnostic tool Programming Device With Full Packet Hardware
| System | Base on Android 7.1 multi-tasking and multi-language operating system |
| Dimension | 280*185*26.5mm |
| Display | 10.1 "resolution: 800*1280/1200*1920 |
| CPU speed | A72: 2GHz, A53: 1.4GHz |
| RAM | 2GB compatible |
| ROM Flash | 32GB |
| Speaker | Stereo Built-in 80/ 1W *2 speaker (waterproof) |
| CPU type | RK3399 (ARM quad-core A53+dual-coreA72) |
| Battery | Polymer lithium ion battery; 3.7V/10000mAh detachable; battery life:6+/H |
| Touchscreen | Capacitive screen |
| Docking | supports Docking extensions |
| Connection | WIFI (802.11 ac/b/g/n) & Bluetooth 4.0 |
| Camera | front and rear double shot, front 2MP / rear 5MP |
| Interface | HDMI, USB3.0, USB2.0, TF card slot (expandable to 128G), headphone jack, DC interface, COM port |
VCI Feature
1.When communicating with the vehicle,the signal light flashes to offer good instructions
2. Data transmission is stable when Bluetooth or USB is connected
Intelligent automotive industrial grade VCI communication module,supporting wide standards and vehicle manufacturer's protocols
3. Support all OBD K line, CANBUS, RS485, RS232 arbitrary pin combination,Compatible with all car communication protocols.
New Arrival 32GB Automotive Diagnostic Tool for All Cars Scanner Tool
| Product | DAT-930 PRO |
| Processor | ARM 32-bit Cortex processor |
| Input Voltage | DC 8-28V |
| Operating Temperature | -10 to 70 °C (14-158°F), Relative Humidity:<90% |
| Storage Temperature | -30 to 120 °C (-22-248°F), Relative Humidity:v90% |
| Communication model | Bluetooth or USB |
| Protocols | UDS, ISO 9141-2, K/L lines, SAE-J1859VPW, SAE-J 1850PWM, CAN ISO 11898 ISO 15765-4, High speed, Middle speed low speed and Single wire CAN, SAE-J 1939, SAE-J 1708, SAE-J 1587 |
Diesel Version
Basic Function: Read ECU Info, Read DTCS, Erase DTCS, Clear learning value, Data Stream, Actuation Test, Read freeze frame data.
Special Function:Oil Reset, Broken cylinder test, DPF Manual Forced Regeneration, Injector Codes,Speed limit, High speed test, Idle speed comparison, Input/output control, Air bleeding, Level calibration, Idle speed learning, Key programmer, Camshaft timing control learning,Control unit adaptations, Read/Write VIN, Write vehicle parameters Modify electronic control data, Idle speed adjustment, ECU litigation, ECU Programming.
Gasoline Version
Basic Function: Read Version Information, Read DTC, Clear DTC, Data Stream, Actuation Test, Data Stream, Actuations, Read freeze frame data, etc.
Special Function: oil Reset, Battery Reset,DPF Reset, EBP Reset, Injector Codes, SRS Reset, TPS Reset,Steering angle calibration, ABS Bleeding, Idle speed Adjustment,Control unit adaptations, Throttle adaptations, Gear Leaning,CVT Leaning, Level Calibration, Optimization, Read/Write VIN,Key Programming.
Our Factory:
Yantai Lift Equipment Co., Ltd. is a joint-stock enterprise specializing in the production and sales of wheel alignment, car lift, tire changer, wheel balancer and other garage equipment.
The company has four major production bases: Wheel alignment, car lift, tire changer and wheel balancer. The company always adheres to independent research and development and independent production. Advanced intelligent equipment and scientific management mode provide its excellent quality assure.
Wheel alignments include car wheel alignments, truck wheel alignments, and car lifts include scissor car lifts, single-post car lifts, two-post car lifts, four-post car lifts, and motorcycle lifts.
Our products have been exported to Australia, Thailand, Malaysia, Indonesia, France, Spain, Turkey, Jordan, Mexico and other countries.
Our products: The perfect combination of high quality and high cost performance.
Our mission: High-quality products serve the automotive aftermarket in China and the world.
We are becoming a modern and competitive company, a leader in the field of automotive service equipment.
Our customer:
Trade Terms | FOB / CFR |
MOQ | 3UNITS (USD200.00 extrally charged for LCL shipment to cover the inland freight + custom declaration fee) |
Port | QINGDAO |
Shipment | BY SEA /AIR |
Payment Terms | T/T |
Payment condition | 30% prepayment,balanced before shipment. |
Supply Capability | 1000units/month |
Sample Availability | Yes ,But all freight(Inland freight +seafreight) covered by buyer |
Sample Time | 5-10days(depends on whether have in stock) |
Lead Time | 25-30days(Rush season 5-10days longer) |
Packing | Metal frame&Carton |
Delivery time | 30-45days shipping time (depends on destination position) |
Service | 1% free parts;1year warranty after port of destination |
1.What's your advantage?
A: Honest business with competitive price and professional service on export process.
2. How I believe you?
A : We consider honest as the life of our company, we can tell you the contact information of our some other clients for you to check our credit. Besides, there is trade assurance from Alibaba, your order and money will be well guaranteed.
3.Can you give warranty of your products?
A: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service.
4.Where are you? Can I visit you?
A: Sure,welcome to you visit our factory at any time.
5.How about the delivery time?
A: Within 15-35 days after we confirm you requirement.
6.what kind of payment does your company support?
A: T/T, 100% L/C at sight, Cash, Western Union are all accepted if you have other payment,please contact me.
