Chinese Supplier Disposable Hospital Medical Warming System Inflatable Warming Blankets for Intensive Care Units Use
Material: SF+PE+SMS
Size: 125*120cm
Refer to the following figure for a different size.
Equipment Description
Temperature Modes | Five:32ºC,35ºC,38C,41ºC Ambient air High: ≥30CFM |
Airflow Modes | Med: ≥28CFM Low: =26CFM |
Interface | OLED Display |
Noise | ≤52dB(High fan setting) |
The Length of Hose | 2m |
Power Supply | 220v,50Hz |
Weight | 7.7kg |
Controller Dimensions | Width: 37.0cm Depth: 29.0cm |
Remark: 3M equipment available |
1. The hug design provides full, unrestricted access to the patient. while keeping the patient warm.
2. The fluid outlets reduce the pooling of fluids on the blanket's surface.
3. By maximizing airflow through the blanket's air channels and perforations, the blanket delivers consistent, even heating.
4. Imaging requirements are accommodated by soft, radiolucent materials.
5. This blanket has two resealable hose ports on either end, so you can place the hose in whichever direction you choose.
6. The blanket should be taped and tucked under and secured to the OR/procedure table with flaps.
7. Patients are surrounded by a "tent" of warm air created by two clear plastic drapes (included).
8. Provides warmth while allowing clinicians full access to a patient, even if they are a large child or a small adult.
9. Included clear drapes retain warm air around the patient and allow observation by the clinician.
Another Product