Complaint
As a large amount of engineering plastics, nylon is widely used in machinery, automobile, electrical appliances, textile equipment, chemical equipment, aviation, metallurgy and other fields.
As an indispensable structural material in various industries, its main characteristics are as follows:
1. Excellent mechanical properties. Nylon has high mechanical strength and good toughness.
2. Good self-moistening and friction resistance. Nylon has good self-moistening properties and small friction coefficient, so it has a long service life as a transmission part.
3. Excellent heat resistance. Such as nylon 46 and other high crystalline nylon thermal deformation temperature is very high, can be used in 150ºC for a long time.. .
After reinforced, the thermal deformation temperature reaches more than 250ºC.
4. Excellent electrical insulation performance. Nylon volume resistance is very high, breakdown voltage resistance is high, is an excellent electrical, electrical insulation material
5. Excellent weather resistance.
6. Water absorption. Nylon water absorption, saturated water can reach more than 3%. To a certain extent, it affects the dimensional stability of the parts.
PA66 (F01401MC NC)
| Product Description | Applications | ||||||||
| ·PA66 | · Injection molding | ||||||||
| · Excellent heat stability | · Good mechanical properties balance | ||||||||
| Properties | Test Method | Test Condition | Unit | Typical Values | |||||
| Physical properties | |||||||||
| Specific Gravity | ISO 1183 | 23ºC | g/cm3 | 1.15 | |||||
| Mechanical properties | |||||||||
| Tensile Strength | ISO 527 | 50mm/min | MPa | 55 | |||||
| Flexural Strength | ISO 178 | MPa | 75 | ||||||
| Flexural Modulus | ISO 178 | 2mm/min | MPa | 2400 | |||||
| Charpy Notched Impact Strength | ISO 179-1eA | 23ºC | kJ/m2 | 10.5 | |||||
| Thermal properties | |||||||||
| Heat deflection temperature | ISO 75 | 1.80MPa | ºC | 165 | |||||
| Other properties | |||||||||
| (CTI) | IEC 60112 | 600 | |||||||
| GWFI/GWIT | IEC 60695-2-13 | GWIT:760/1.0 | PASS | ||||||
| IEC 60695-2-12 | GWFI:960/1.0 | PASS | |||||||
| Flammability | UL94 | 0.7mm | V2 | ||||||
| Note: The data above is a typical value for reference, not a guaranteed value. The data will vary with tool design such as gate type, gate location, gate number, injection molding process, and part thickness. The data will vary with different colors as well. Prior to use the material, please consult with TOPO NEW MATERIAL CO., LTD. | |||||||||
| Processing Conditions | Range | ||||||||
| Melt Temperature | 245-260ºC | ||||||||
| Mold Temperature | 60-70ºC | ||||||||
| Injection Speed | 65-80% | ||||||||
| Pre-Dry needed | 120ºC, 2h | ||||||||
With the development of petrochemical industry and other industries, nylon engineering plastics provide abundant and cheap raw materials and broad market.
Nylon is mainly used in automobile industry, electrical and electronic industry, transportation industry, machinery manufacturing industry, wire and cable communication industry, film and daily necessities.
Vehicle light weight and energy saving requirements. Especially take advantage of its good mechanical strength, wear resistance, oil resistance, self-lubrication and other characteristics, manufacturing all kinds of bearings, gears, pulleys, oil pipe, oil reservoir, oil resistant gaskets, shielding, supporting frame, wheel cover cap, guide plate, fan, air filter shell, radiator water room, brake pipe, hood, door handles, etc.
1.Packing:
In 25kg PP woven bag, or per your requirement.
2.Storage:
The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.
3.Transportation:
During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.
There are some questions you may would like to know:
Q1: Are you trading company or manufacturer?
We are factory.
Q2 : Can I take a look at some samples first?
Yes, of course! We could provide free samples for you.
Q3 : Do you accept customization?
OEM can be acceptable.We can produce according to your indicators.
Q4 : What is your payment terms?
T/T, Western Union, Paypal etc.
