Complaint
| Active Cupric oxide Catalyst Technical Data | |
| Apperance | Black |
| Purity | 99% min |
| Strength | 40 N/cm min |
| Moisture | 1% max |
| Bulk Density | 1 ± 0.05 g/ml |
| Surface Area | 100 m2/g |
| Type | Powder, Particle Granule, Pellet Columnar, Honeycomb and Spherality Ball type |
| Type | Typical Sizes | Other Sizes |
| Pellet | Diameter 1.5 mm | All sizes from pellet 1.1mm to 9mm can be produced, such as pellet diameter 2mm, 4mm, etc. |
| Diameter 3 mm | ||
| Powder | Finer than 80 Mesh | Finer than 80 Mesh |
| Granule | 4x8 Mesh, 8x14 Mesh, 6x12 Mesh, 10x16 Mesh, 12x20 Mesh | Different granule sizes can be produced as your request. |
| Spherality Ball | Diameter 2mm-10mm | Produced as your request. |
| Flake | 30-80 Mesh | Produced as your request. |
| Note: Catalyst specification parameters can be customized according to requirements. | ||
Minstrong has pellet columnar, irregular granular, powder and spherality ball type for different working conditions. Minstrong also can customize different size and data as your request.
1) Can I get sample?
In order to help you know our products better, our factory would like to offer free sample after mutual communication.
2) How to replace catalysts of other brands?
Minstrong catalyst has excellent performance and low bulk specific gravity. You can achieve the same effect by replacing other brand catalysts with the same volume, and you can save 1/3 of the cost.
3) How do I determine the specification and dosage of the catalyst?
According to your working conditions, we can select catalysts with appropriate specifications and calculate reasonable dosages.
4) How can I compare the cost of catalyst?
Catalysts are not consumable materials, and are generally calculated according to volume. It is necessary to calculate the comprehensive cost of catalysts based on important factors such as specific gravity, catalytic efficiency, and service life, and at the same time assess the technical and service capabilities of suppliers to prevent after-sales risks
5) What should I do if I don't know how to use the catalyst?
We will design a reasonable process flow according to your working conditions, and provide you with one-stop services such as catalyst selection, test plan formulation, device design and manufacture, and on-site commissioning.
Thank you for your patient reading! We welcome your inquiry.
