Complaint
HC-220BI4501 is a 2.2 inch TFT LCD display module with optional resistive touch screen and capacitive touch screen control with a resolution of 240×320 pixels. This size TFT LCD monitor is portrait mode with wider viewing angle by POL adjustment, left: 45/right: 45/up: 50/down: 20 degrees (typical).Optional RTP or CTP.
This HC-220BI4501 module has built-in ST7789V2-G4 controller IC, supports MCU interface, power supply voltage (VCC) range is 3.0V to 3.6V, brightness is 390 nits (typ), and contrast ratio is 800:1. This module is Industrial ideal for communication equipment, medical equipment, etc. The module can work at temperatures from -20°C to +70°C; its storage temperature range is -30°C+80°C.
| Item | Contents | Unit |
| Size | 2.2TFT | inch |
| LCM Dimension | 38.68(W)* 55.14(H) * 2.35(T) | mm |
| LCD Active Area | 33.84* 45.12 | mm |
| Number OfDots | 240 * RGB * 320 | pixel |
| LCD Type | a-Si TFT | |
| Viewing Direction | 12 0'CLOCK | |
| Driver IC | ST7789V2-G4 | |
| Interface Type | MCU | |
| Operating Temperature | -20ºC~ 70ºC | |
| Storage Temperature | -30ºC~ 80ºC | |
| Backlight Type | 4 LEDs | |
| Brightness | 390 |
| NO. | Symbol | Description |
| 1 | GND | Ground |
| 2-5 | NC | NC |
| 6 | IMO | I/O choose |
| 7-9 | NC | NC |
| 10 | RESET | Reset pin |
| 11-14 | NC | NC |
| 15-22 | DB17-DB10 | Data Bus |
| 23 | NC | NC |
| 24-31 | DB8-DB1 | Data Bus |
| 32-34 | NC | NC |
| 35 | RD | Read signal, rising-edge-active. |
| 36 | WR | Write signal, rising-edge-trigger. |
| 37 | RS | Data/Command register address. |
| 38 | CS | Chip enable, Low-active. |
| 39 | VCC | POWER SUPPLY |
| 40 | VCC | POWER SUPPLY |
| 41 | LEDK | BACKLIGHT CATHODE |
| 42 | LEDA | BACKLIGHT ANODE |
| 43 | LEDA | BACKLIGHT ANODE |
| 44 | LEDA | BACKLIGHT ANODE |
| 45 | GND | Ground |
Q: How can I get some samples?
A: We don't provide free one, but we can have a discount when you reorder according to different quantity, and you will win at least 3% discount.
Q: What is the MOQ?
A: It depends on different products. Please keep in touch with sales to confirm the MOQ.
Q: How do you control quality?
A: All materials we purchase for making any orders are high quality and RoHS compliant, and Control quality with ISO 9001:2001 management system.
Advance inspection instrument and equipment to ensure 100% inspection for each and every piece before shipment.
Q: Does your product have any warranty?
A: Yes, we offer 12 months warranty for our products.
Q: What's your payment method?
A: Payment: T/T, Paypal, Western Union, etc.
For samples: payment in advance.
For mass production: 30% deposit and 70% balance before shipment.
Q: Do you offer custom solution?
A: Yes, we can offer custom solution if standard products couldn't meet buyer' requirements.
