Complaint
Explosion-proof fluorescent lamps are divided into traditional fluorescent lamps and electrodeless fluorescent lamps. Traditional fluorescent lamps are low-pressure mercury lamps, which use low-pressure mercury vapor to radiate ultraviolet rays during the discharge process, so that the fluorescent powder emits visible light. Therefore, it is a low-pressure arc discharge light source. . Explosion-proof discharge lamps that mainly use ultraviolet radiation generated by discharge to excite phosphors to emit light are called explosion-proof fluorescent lamps.
The fluorescent explosion-proof lighting is suitable for use in the ship, oil production platforms, chemical industry and zone 1 or zone 2 areas of the explosive gas environment. The shell is made of good quality steel, and the lampshade is made of good quality transparent PC. The light adopts a fluorescent lamp. It can be applicable to hang-type installation, and it is convenient to replace the light tube. The light body adopts a seal structure, it has high waterproof performance and anti-corrosion performance. It is an integral type clip with high protection grade.
| Model | MXEL 8197 | Frequency | 50/60Hz | |
| Rated Voltage | AC220V | Power Factor | >0.95PF | |
| Power | 1*18/1*36W | Operating Temperature | -30~50°C | |
| Protection Level | IP66 | Correlate Color Temperature | 3000-6500K | |
| Lighting Angle | 360° | Color Rendering Index | ≥70RA | |
| Base Specifications | CREE3030 | LED'S Operating Life | 50000Hours | |
| Light Source Specifications | T8 Fluorescent tube | T8 led tube | Start-up Time | ≤0.2S |
| Anti-corrosion Grade | WF2 | Weight | 2.8Kg | |
| Explosion Proof Grade | Ex d ll B T6 Gb | Size | 1280*202*146MM | |
| Light Efficiency | >90Lm/W | >120Lm/W | Executive Standard | GB3836.1,GB3836.2 |
| Name | Description | Quantity (pcs) | Name | Parameter |
| Outer box | 137*23.5*15.7cm Five layers of corrugated paper | 1 | N.W. | 5.6kg |
| Inner box | 135.6*22.2*14.5cm Five layers of corrugated paper | 1 | G.W. | 6.3kg |
| Foam | 222*147*70mm | 4 | G.W. | 11.5kg |
| Packaging method | A box of two | |||
1. Applicable to zone 1 and 2 of explosive environment;
2. Applicable to IIA, IIB, IIC explosive gas environment;
3. Applicable to zone 20, 21 and 22 of explosive dust environment;
4. Applicable to the environment where the temperature group is TI-T6;
4. It is mainly used in explosive and flammable places such as petrochemical industry. The installation can be hung or hung.
Caution
-Schematic diagram
1.Before installation, it is necessary to check whether the actual operating conditions are in conformity with the parameters listed on the lamp nameplate.
2.Before installation, please test the lighting according to the parameters of the lamp nameplate to ensure that there is no quality problem before installation.
3.Before installation, it is necessary to determine the installation location and mode of the lamps according to the installation mode provided by the product, in combination with the on-site use environment and lighting requirements, so as to ensure that the installation is firm and reliable.
4.Connect the prepared cables with the input cables of lamps and lanterns according to the corresponding fire (brown), zero (blue) and ground (yellow-green) wires, so as to ensure that the connection is firm, and make good insulation and waterproof measures at the connection.
5.The input end of the cable can be connected to the power supply of the corresponding voltage to illuminate.
-Using The Matters Needing Attention
1. When transporting, the lamp should be installed in the carton equipped with foam shock absorption.
2. When using, the surface of the lamp has a certain temperature rise, which is a normal phenomenon.
3. The power supply voltage can work normally in the rated voltage. If the power supply voltage is too high, the lamp will be damaged; if the voltage is too low, the lamp will not start normally.
4. The luminaire must be reliably grounded.
-Quality Assurance
The company has passed ISO9001:2008 international quality system audit certification, this product strictly implements ISO9001 international quality management system standard production, to ensure that the product quality fully meets national standards and design requirements.
Explosion Proof Exit Light EX proof Emergency Light Explosion-Proof High Bay Light
1.Why is Explosion Proof Lighting necessary in your area?
Plenty of commercial facilities have areas where lighting fixtures can come into contact with hazardous materials. These can be flammable, combustible, or ignitable materials, gases, or vapors. These areas can be at risk of fire or even explosion if the lighting fixtures can't withstand the abnormal conditions.
2.What is hazardous location lighting?
Hazardous location lighting refers to fixtures that you can safely use in an area where it's likely that fire might start. According to the National Electrical Code, hazardous locations are those areas "where fire or explosion hazards may exist due to flammable gases or vapors, flammable liquids, combustible dust, or ignitable fibers or flyings."
3.What is explosion-proof light fixture?
Explosion proof lighting refers to lighting fixtures that are able to contain sparks that could potentially the flammable and explosive gases in the atmosphere. Therefore, explosion proof lighting does not refer to lighting equipment that are resistant to explosions but rather, the capacity to prevent external explosions from occurring in a hazardous location.
Finding suitable lighting for the work site that won't falter under extreme circumstances is what makes it most reliable in any situation. Lamp suite explosion proof lighting is 100% certified with non-spark, durable, and thick materials, along with all necessary features to maintain a high level of safety at all times.
So, what makes Lamp suite different?
Our expertise in solar and technical lighting solutions allows us to give you the appropriate explosion proof lighting to suit you and your business's needs the best. As a result, you can expect outstanding LED performance, lower costs, increased productivity, and safety adherence to give you and your workers total peace of mind.
Lamp suite has a passionate team aiming to help you create a safe working or public environment where workers, pedestrians, shoppers, or anyone nearby can feel comfortable moving around.
