Description
Product Description
Manual rotary pipe cold cutter is the most professional and most effective cold-cutting tool produced by E-WORK, which can cut carbon steel, stainless steel, cast iron, and nodular cast iron pipes in large diameters. The reasonable body design and ingenious structure make the pipe-cutting procedures faster and more labor-saving. The cutting blade is made of high-strength tool steel and the strength and toughness of the blade are perfectly balanced after particular heat treatment, which makes the blade cuts pipes rapidly and more wear-resisting.
This series of pipe-cutting machines are widely used in a flammable and explosive environment, no noise areas, narrow space trenches, underwater, etc..No spark or debris is produced during the pipe-cutting operation, which not only ensures the safety of pipeline construction but also ensures the tidiness inside the pipe to avoid clogging the valve. It is the most ideal cold-cutting tool for pipes of large diameter.
Product Features
· The most professional pipeline cold-cutting tool at present· Purely manual operation, no spark, ensures the safety of pipeline construction· Debris-free to ensure the clean interior of the pipe and prevent the valve from clogging· The cutting blade is made of high-strength tool steel and the strength and toughness of the blade are perfectly balanced after particular heat treatment, which makes the blade cuts pipes rapidly and more wear-resisting.· Reasonable design of guide frame makes the cutting edge smooth and straight, more efficient
· Four blades cut at the same time, faster and more labor-saving.
· Simple operation, no other power source required, durable
· This cutting machine is the only straight-cutting tool in the market, and the only one recommended for cutting large-diameter carbon steel, stainless steel, cast iron, and nodular cast iron pipesApplicable Environment
Flammable and explosive environment, no noise area, narrow trench, underwater, etc
Product Parameters
| PRODUCT MODEL | OUTSIDE DIAMETER OF THE PIPE | SPECIFICATION | WEIGHT |
| INCH | MM | MM | KG |
| ECR8 | 6-8 | 159-264 | 530*300*110 | 17.7 |
| ECR12 | 10-14 | 266-358 | 640*330*110 | 22 |
| ECR16 | 16-18 | 368-462 | 800*530*110 | 24.5 |
| ECR20 | 16-20 | 368-529 | 900*530*110 | 26 |
CUTTER BLADE TABLE:| PRODUCT MODEL | STANDARD PACKING | APPLICABLE E-WORK PIPE CUTTER | BLADE EXPOSURE LENGTH | APPLICATION |
| INCH | MM |
| EBR8-36S | 4 | ECR8, ECR12, ECR16 | 0.635 | 16.1 | ECR8, ECR12, ECR16, carbon steel, stainless steel |
| EBR8-36I | 4 | ECR8, ECR12, ECR16 | 0.5 | 12.7 | ECR8, ECR12, ECR16, cast iron, nodular cast iron |
| EBR8-36XS | 4 | ECR8, ECR12, ECR16 | 0.819 | 20.8 | ECR8, ECR12, ECR16, extra-thick carbon steel, stainless steel |
INSTRUCTIONS:
S = pipe cutters with blades of cutting carbon steel and stainless steel.
I= pipe cutters with blades of cutting cast iron and nodular cast iron.
X = pipe cutters with blades of cutting size 80 thick steel.
XX= pipe cutters with blades of cutting size 100 thick steel.
XS = pipe cutters with blades for cutting extra-thick carbon steel and extra-thick stainless steel.
For pipe cutters of the same type, you only need to change blades to cut pipes made of different materials. Product Operation Instruction
- Check the blades to make sure they are suitable for the type of pipe to be cut.
- Make sure the bolt end is in a proper position, suitable for the size of the pipe to be cut. The double-end nut should be unscrewed evenly until the distance between the center of the rod end loop and the screw end is approximately 57 mm(two and a quarter inches). Unscrew the quick plug and pill pin and press the pipe-cutting machine against the pipe to be cut (if the clearance around the pipe is minimal, you may have to unscrew two pins). Connect the quick plug and pull the pin to the appropriate position through the supporting part of the tool holder and the rod end, and place the part of the torsional spring-loaded guide apparatus of the pipe-cutting machine above the pipe. Tighten the two double-end nuts by hand evenly until all four cutter wheels touch the pipe. Tighten the screws once every 1/2 round. A pipe-cutting machine can also be driven around the pipe by a double-end nut.
- While still being able to push the pipe-cutting machine around the pipe, tighten the double-end nut as much as possible (if sufficient tension is provided, the handle lever can be easily tightened--1/2 turn of the screw).
Note: When cutting the pipe, adding oil to the cutting edge can save power and extend the service life of the blade and the equipment. Detailed Photos
Product Structure
| ITEM | NAME | EA | ITEM. | NAME | EA |
| 1 | Support tool holder | 2 | 8 | bolt | 3 |
| 2 | Blade pin | 4 | 9 | Hexagonal nut | 3 |
| 3 | Blade | 4 | 10 | Torsional spring | 2 |
| 4 | Quick plug and pull pin | 1 | 11 | Elastic cylindrical pin | 2 |
| 5 | Dextro loose joint bolt | 2 | 12 | roller | 8 |
| 6 | Double-end nut | 2 | 13 | Guide apparatus | 2 |
| 7 | Levo loose joint bolt | 2 | 14 | Operation handle assembly | 1 |
Company Profile
Henan E-work Industrial Equipment Co., Ltd. is a professional company dedicated to the R&D, production, and sales of piping machines and tools related to pipes.
In line with the business tenet of "piping solutions expert" and the mission of "making work easy and efficient", we have
independently developed and produced a series of products that customers love. Our product series mainly include pipe-cutting machines, pipe-beveling machines, pipe-bending machines, pipe-threading machines, HDPE pipe machines, and related tools. These products are widely used for stainless pipe, steel pipe, galvanized pipe, mild steel, and plastic pipes.
Our company not only has a professional and skilled workforce but also has established a complete and complete quality management system. We are committed to providing customers with world-class products and look forward to sincere and friendly cooperation with our customers to have a good business together.
Complaint
