| Product classification:Inconel |
| Material:Inconel 600 |
| Corresponding Brand |
| High temperature new name | High temperature old name | New name for corrosion resistance | Corrosion resistant old name | National brand number |
| | | NS3102 | | OCr15Ni75Fe |
| JIS | ASTM | UUNS,SAE | DIN | EN |
| | Inconel600 | N06600 | 726LC,2.4817 | |
| Chemical Composition |
| % | C | Si | Mn | P | S | Cr | Ni | Co | Fe |
| Min | | | | | | 14 | allowance | | 6 |
| Max | 0.1 | 0.5 | 0.1 | 0.03 | 0.015 | 17 | | 0.04 | 10 |
| Physical Property |
| Density g/cm³ | Magnetism | Thermal conductivity/w/(m.k) | Resistivity | Specific heat capacity | Coefficient of linear expansion |
| 100~900ºC | ºC)/(Ω.mm2/m2 | ºC)/J/(kg.k)ºC | /(10-6/k) |
| | | | 20~900ºC |
| 8.43 | | | 1.03 | 443 | |
| Temperature0/ºC | 21 | 540 | 650 | 760 | 870 |
| Modulus of elasticity | 214 | 184 | 176 | 168 | 157 |
| Thermal Conductivity |
| θ/ºC | 20 | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 1000 |
| λ//(W/(mºC)) | 12.85 | 13.94 | 15.15 | 16.62 | 18.71 | 20.72 | 22.40 | 24.49 | 27.00 | 29.51 | 31.60 |
| Coefficient of Linear Expansion |
| θ/ºC | 20~200 | 20~ 00 | 20~400 | 20~500 | 20~600 | 20~700 | 20~800 | 20~1000 |
| a/10-6ºC-1 | 12.35 | 12.75 | 13.10 | 13.55 | 14.50 | 15.15 | 15.70 | 16.20 |
| Chemical Property |
| θ/ºC | 800 | 900 | 1000 |
| Oxidation rate/(g/m2 -h) | 0.01865 | 0.05724 | 0.13718 |
| Mechanical Property:Performance Specified In Technical Standards |
| Variety | θ/ºC | tensile property | HBS | bending test |
| σb/MPa | OP0.2/MPa | 05/% | φ/% |
| Bar | 20 | ≥585 | ≥240 | ≥30 | | 134~217 | |
| A round cake, a circular blank, or a ring | 20 | ≥520 | ≥205 | ≥35 | | ≥187 | |
| hot rolled plate | 20 | ≥550 | ≥240 | ≥35 | ≥40 | | |
| 900 | ≥95 | ≥45 | ≥40 | ≥50 | | |
| cold-rolled sheet | 20 | 2550 | ≥240 | ≥30 | | | 1 |
| 900 | ≥90 | ≥40 | ≥60 | | | |
| cold-rolled sheet | 20 | ≥550 | ≥200 | ≥30 | | | test |
| strip | 20 | ≥550 | ≥240 | ≥30 | | | 1 |
| wire | 20 | Actual measurement | Actual measurement | Actual measurement | | HV≤151 | Cold forging pass |
| Table |
| Product thickness/mm | <0.25 | 0.25~1.30 | >1.30~4.00 |
| Bending coefficient | Mutual agreement | 1 | 2 |
Complaint
