Complaint
HDPE
High density Polyethylene (HDPE): is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion
Performance of the project | Test condition [condition] | The test method | The test data | The data unit | |
Basic performance | Density mass index | GB/T 1033 | 0.948±0.002 | g/cm3 | |
Density test results | GB/T 1033 | 0.948 | g/cm4 | ||
Melt flow rate mass index | 190ºC/5.0kg | GB/T 3682 | 0.23±0.03 | g/10min | |
Melt flow rate test results | GB/T 3682 | 0.25 | g/10min | ||
Melt flow rate mass index | 190ºC/21.6kg | GB/T 3682 | 6.2±1.5 | g/10min | |
Melt flow rate test results | GB/T 3682 | 6.4 | g/10min | ||
Mechanical properties of | Tensile yield strength quality index | GB/T 1040 | ≥23 | MPa | |
Test results of tensile yield strength | GB/T 1040 | 27.6 | MPa | ||
Elongation at break quality index | GB/T 1040 | ≥600 | % | ||
Test results of elongation at break | GB/T 1040 | 804 | % | ||
Quality index of impact strength of simply supported beam | GB/T 1043 | ≥25 | KJ/m2 | ||
Test results of impact strength of simply supported beam | GB/T 1043 | 26.7 | KJ/m2 | ||
Other properties | Volatile matter quality index | GB/T 15658 1 | ≤350 | mg/kg | |
Volatile test results | GB/T 15658 1 | Did not check out | mg/kg | ||
Biochemical property | Cleanliness (color granule) quality index | SH/T 1541 | ≤20 | grain/kg | |
Cleanliness (color particle) test results | SH/T 1541 | 0 | grain/kg | ||
Cleanliness (impurities) quality index | SH/T 1541 | ≤60 | grain/kg | ||
Cleanliness (impurities) test results | SH/T 1541 | 0 | grain/kg | ||
1.Fiber ( Carpet, Textiles, Upholstery, etc.)
2.Film ( shopping bags, casting film, multilayer film, etc.)1.Fiber ( Carpet, Textiles, Upholstery, etc.)
2.Film ( shopping bags, casting film, multilayer film, etc.)
3.Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
4.Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
5.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture,Toys, etc.)
3.Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
4.Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
5.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture,Toys, etc.)
1. Are youtrading company or Manufacturer ?
We are factory.
2.About Sample
We provide samples, but you need to pay the sample fee and freight.
3. About Material
We can customize the material according to customers' requirement.
4. About Quality
All the products must be tested strictly according to the testing procedure before shipment.
5. About Delivery Period
Normally delivered in 7 working days after the confirmation of order& payment. And it varies according to the material and
quantity.
6. About Payment term
It's flexible, T/T, L/C at sight,100% in advance,30% in advance, the balance by copy B/L
