Complaint
Continuous carbonization furnace is also called coconut shell carbonization furnace, rice husk carbonization furnace, straw carbonization furnace, wood chip carbonization furnace, and bamboo chip carbonization furnace.
Application range: peanut shells, sawdust, corn stalks, bagasse, branches, rice husks, bamboo chips, sorghum stalks, coconut shells, apricot shells, coffee shells, cotton stalks, bean stalks, potato grass, dead leaves, traditional Chinese medicine residue, dirt Carbonization of materials with biomass properties such as mud and domestic waste.
Materials that can be processed: sawdust, rice husk, straw, peanut shell, palm shell, coconut shell, fruit shell, walnut shell, apricot shell, melon seed shell, bamboo, bamboo powder; electronic waste, battery, capacitor, resistor, circuit board, copper Wires, wires, plastics, cans, domestic waste, municipal waste, activated carbon, medical waste
Continuous carbonization furnace structure:
It consists of four major equipments: vaporization furnace, flue gas purification system and carbonization machine, cooling.
Model: 1.2*12m
Output: 600kg/h
Load in one 20' feet container and one 40' feet container.
We have various production line configurations, and flexible combinations support customization.
Working principle of continuous carbonization furnace:
It will first be burned in a gasification furnace to generate flue gas. After filtering out gas impurities such as wood tar and smoke through the flue gas purification system, the flue gas will be transmitted into the carbonization machine for combustion. When a certain temperature is reached, the carbonization machine will add materials that need to be carbonized. , through the transmission of the pipeline, the material is burned in the carbonization machine. The combustion of organic matter needs to meet three points: heat, oxygen and organic matter, because the carbonization machine is almost a closed space, which cannot meet the demand for oxygen, so that the material is kept at 800 degrees inside the carbonization machine. At high temperature, after adjusting the speed of the conveying device of the carbonization machine, it will not burn into ash, but only burn into charcoal. After the flue gas produced by the materials burned in the carbonization machine is treated by flue gas purification, it returns to the carbonization machine for combustion, so that the thermal energy of the machine can run continuously, achieving smoke-free, environmental protection and continuous effects. Then the charcoal is transported by the cooler to cool down, so that the temperature of the charcoal is only 50-80 degrees when it comes out. During the transport process of the charcoal after it comes out, because the charcoal is fully exposed to the air, if the material density is large and relatively thick. Although there is no open flame on the surface, there may be sparks in the inner core of the material, or it may spontaneously light. It is necessary to install mist spray equipment to cool the charcoal out twice to completely eliminate the source of ignition.
Advantages of carbonizing furnace
01. Good quality charcoal.
Using the new principle of spontaneous combustion calcination,
Improve the quality of charcoal
02. Low production cost
The comprehensive carbonization furnace does not need external heating fuel,
Save a lot of production fuel and cost
03. Less labor is used in production
In the production of comprehensive carbonization furnace, one person can
Operate dozens of carbonization furnaces, greatly reducing
labor intensity
04. Easy to move
It can be moved as a whole with the relocation of the carbonizing plant.
FAQ:
01 Can the carbonization furnace be produced continuously?
This carbonization furnace can be produced continuously for 24 hours.
02 Is the carbonization furnace smoke-free and environmentally friendly?
Yes, this carbonization furnace is smokeless and environmentally friendly, and the flue gas produced can be recycled.
03What is the output?
There are configurations with different output: 150kg/h, 600kg/h, 1000kg/h...
04 There are several models of drum carbonization furnace
0.8*10m, 1.2*12m...
We Gashili Machinery are mainly engaged in the production processing and sales of charcoal machines, carbonization furnaces, rod making machines, charcoal powder molding machines, dryers, wood shredders, biomass pellet machines and other environmental protection equipment.
Type of carbonization furnace:
Ordinary type: It can only be used to produce charcoal and cannot collect gas;
Wood carbonization equipment: used to carbonize branches, wood blocks, coconut shell blocks, scraps in furniture factories, etc. The equipment can be equipped with a gasification furnace device to recover gas and turn it into gas for the carbonization furnace or others;
Carbon powder production line: The machine used to produce carbon powder can carbonize rice husk, sawdust and bamboo powder into carbon powder and then process it into activated carbon.
