Motor size | 94 |
---|
Size | 450 mm |
---|
Rotor surface | Painted black |
---|
Terminal box material | PP plastic |
---|
Impeller material | PP plastic, galvanized sheet-metal plate |
---|
Guard grille material | Steel, coated with black plastic (RAL 9005) |
---|
Number of blades | 5 |
---|
Airflow direction | V |
---|
Direction of rotation | Clockwise, viewed toward rotor |
---|
Degree of protection | IP54 |
---|
Insulation class | "F" |
---|
Ambient temperature note | Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings. |
---|
Moisture (F) / Environmental (H) protection class | H2 |
---|
Max. permitted ambient temp. for motor (transport/storage) | + 80 °C |
---|
Min. permitted ambient temp. for motor (transport/storage) | - 40 °C |
---|
Installation position | Shaft horizontal or rotor on bottom; rotor on top on request |
---|
Condensation drainage holes | On rotor side |
---|
Mode | S1 |
---|
Motor bearing | Ball bearing |
---|
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 3,5 mA |
---|
Electrical hookup | Terminal box / Capacitor integrated and connected |
---|
Motor protection | Thermal overload protector (TOP) with basic insulation |
---|
Protection class | I (with customer connection of protective earth) |
---|
Motor capacitor according to EN 60252-1 in safety protection class | S0 |
---|
Conformity with standards | EN 60034-1 / CE |
---|
Approval | CS A C22.2 No. 100 / EAC / UL 1004-1 |
---|