Complaint
| Product Description | ||||
| Injection Molding grade, Light diffusion grade, Weather resistance, Flame resistance | ||||
| General | ||||
| Form | ||||
| Feature | ||||
| UL Yellow Card E244324-103158489 | ||||
| Uses | Lighting Applications | Lighting Diffusers | Led | |
| Physical | Nominal Value | Test Method | ||
| Density | 1.20 g/cm³ | ISO 1183 | ||
| Melt Volume-Flow Rate, MVR(300 °C;1.2 kg) | 3.5 cm³/10 min | ISO 1133 | ||
| Molding Shrinkage, Across Flow(4 mm) | 0.50 - 0.70 % | Internal Method | ||
| Molding Shrinkage, Flow(4 mm) | 0.50 - 0.70 % | Internal Method | ||
| Water Absorption(24 hr;23 °C) | 0.20 % | ISO 62 | ||
| Mechanical | Nominal Value | Test Method | ||
| Tensile Modulus | 2400 MPa | ISO 527-2/1 | ||
| Tensile Stress, Yield | 64.0 MPa | ISO 527-2/50 | ||
| Tensile Stress, Break | 50.0 MPa | ISO 527-2/50 | ||
| Tensile Strain, Yield | 6.0 % | ISO 527-2/50 | ||
| Nominal Tensile Strain at Break | 30 % | ISO 527-2/50 | ||
| Flexural Modulus(2 mm/min) | 2240 MPa | ISO 178 | ||
| Flexural Stress(2 mm/min) | 96.0 MPa | ISO 178 | ||
| Charpy Notched Impact Strength(23 °C) | 10 kJ/m² | ISO 179 | ||
| Charpy Unnotched Impact Strength(23 °C) | No Break | ISO 179 | ||
| Thermal | Nominal Value | Test Method |
| Heat Deflection Temperature, Unannealed(1.8 MPa) | 124 °C | ISO 75-2/A |
| CLTE, Flow | 7.0E-5 cm/cm/°C | ISO 11359-2 |
| CLTE, Transverse | 7.0E-5 cm/cm/°C | ISO 11359-2 |
| RTI Elec(1.5 mm) | 130 °C | UL 746 |
| RTI Imp(1.5 mm) | 125 °C | UL 746 |
| RTI Str(1.5 mm) | 130 °C | UL 746 |
| Flame Rating(1.5 mm) | V-0 | UL 94 |
| Glow Wire Flammability Index 1.5 mm 3 mm | 960 °C 960 °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature [GWIT] 1.5 mm 3 mm | 875 °C 875 °C | IEC 60695-2-13 |
| Electrical | Nominal Value | Test Method |
| Surface Resistivity | > 1.0E+15 Ohms | IEC 60093 |
| Volume Resistivity | > 1.0E+15 Ohms·cm | IEC 60093 |
| Optical | Nominal Value | Test Method |
| Transmittance (3000 µm) | 77.0 % | ASTM D1003 |
