PPA 9023 is free flow, 25 mesh white powder fluoropolymer based processing aid. At a very low level addition(50-800ppm), it can improve PE processing without affect the original physical property of the plastics as well as sealing, adhesion and printing, can be used for mLLDPE, LLDPE, HDPE, LDPE, EVA and other polyolefin resin.
Processing Guide The dispersion of PPA in the resin determines in a large part the using effect, the recommended process is make the 2% - 3% master batch by the twin-screw extruder, and then add it into the extrusive resin according to ultimate goal. When using for the first time, there are 20-60 minutes onset time according to the equipment, the base material and the shear rate. No onset time for the equipment that use PPA9023 long-term continuously.
Product Functions Improve film surface quality by eliminating melt fracture; Reduce wears of a mold in the processing; eliminate the die buildup; Increase the ratio of LLDPE in LLDPE/LDPE blends for lower cost, higher quality; Increase output and save energy.
Shelf Life 1 year, under 30ºC, avoid extensive humidity and light.
Packing Net 25kg per barrel
Food Contact Safety PPA meets the requirements of FDA 21 CFR 177.1520 USA. It can be used in food contact.