Complaint
ZC3-T Digital Schmidt Hammer Lab Equipment, Resiliometer Test Equipment
Characteristics:
1. Connection problem: Connection wires between main machines and minor machines are always the weakest link of old-fashioned digital resiliometers, and due to insertion, pulling, bending and wear, damage, loose contact and other situations are easy to arise; connection wires are also very inconvenient for overhead operation or special occasions. ZC3-D one-piece digital resiliometer completely solves the above problems.
2. random software: random computer data processing software, after the field sampling data is completed, the spring back instrument through the USB port connection communication cable, the data sent to the computer, you can immediately generate a test report.
3. data view: after the completion of the sample can be immediately view the original rebound value of finished components, the measured area strength, the overall evaluation of the component and other data.
4. real-time clock: real time display, record the sampling time, and can be uploaded to the computer software.
5. battery real-time monitoring: real-time monitoring of the battery, exhaust alarm to facilitate the user to arrange working hours.
6. the strength of the test curves: a unified curve and more than 10 local measurement of the strong curve, sampling before setting up the platform to set up
7. and resiliometer appearance: rebound instrument design has the advantages of beautiful appearance, compact and handy, OLED LCD screen convenient hand operation and data view; standardization of the button layout, convenient operation started.
8. sensor grating: rebound tester sophisticated sensor with independent intellectual property rights completely satisfy the accuracy of the detection data
9. the rebound value: the mechanical spring back device without blocking the slider, the value of the LCD screen is completely unified, easy to check each other. Can be used in the same as the traditional mechanical rebound tester on the special test instrument for verification.
Main Technical Parameter:
| Memory storage | 128 components, up to 20480 points and related data |
| Display | 55x13 (mm) 128x32 (dot matrix) OLED LCD |
| Power | 3.7V lithium ion battery |
| Communication rate | 115200bps |
| Nominal kinetic energy | 2.207J + 0.100J |
| Length of pointer | 20.0±0.2mm |
| Friction of pointer | 0.65±0.15N |
| Sphere semidiameter at the end of the flip rod | 25±1.0mm |
| Rigidity of flip tensioned spring | 785.0±40.0N/m |
| Location of flip hammer's hook release | "100" at the scale mark |
| Work length of flip tensioned spring | 61.5.0±0.3mm |
| Strike length of flip hammer | 75±0.3 |
| Hop location of the flip hammer | "0" at the graduated scale |
| Fixed value of steel anvil | 80±2 (our products are controlled between 80-81) |
