M3 M6 M10 M15 M20 Replacement Yojo B60b Gasket Plate Heat Exchanger HVAC Marine Industry

Min.Order: 1

Product origin: Wuxi, Jiangsu, China

Infringement complaint:

Complaint

US$ 150 ~ 1000

Description

Model	A(mm)	B(mm)	C(mm)	D(mm)	E(mm)
B60B/M6	N(2.0+X)	320	140	920	640

The bottom of the center to ground level(mm)	140
MAX.LC(mm)	1200
Interface Path(mm)	50
Monolithic heat transfer area(m2)	0.15
The maximum number of pieces(N)	250
Maximum flow(m3/h)	36
Design pressure(Mpa)	1.6

Features

Every detail is carefully designed to ensure optimal performance, maximum uptime and easy maintenance.

Selection of available features:

• Corner guided alignment system

• Chocolate pattern distribution area

• Glued gasket

• Clip-on gasket

• Leak chamber

• Fixed bolt head

• Key hole bolt opening

• Lifting lug

• Lining

• Lock washer

• Tightening bolt cover

Can be customized according to customer's requirements.

Plate Material	Suitable fluid
Stainless steel (SUS304, 316L etc.)	Pure water, River water, Edible salt water, Mineral oil
Titanium, ti-pd	Brine, sea water, Salt water
SMO254	Dilute sulphuric acid, Salt water solution, Inorganic aqueous solution
Ni	High temperature, High concentration of caustic soda
Hastelloy (C276, C22)	Concentrated sulfuric acid, Hydrochloric acid, Phosphoric acid

Main Body Gasket	Operating Temperature (ºC)	Suitable Fluid
NBR	-15 ~ +135	Water, Sea water, Mineral Salt, Brine
EPDM	-25 ~ +180	Hot water, Vapour, Acid, Base
F26	-25 ~ +230	Acid, Base, Fluid
FTP	0 ~ +160	Concentrated acid, Base, High temperature oil, Vapour

Plate Type	Application
Lower Runner (B)	Temperature drop of heat-transfer medium too large, Temperature difference of logarithm too small
High Runner (H)	Request of viscosity, Fibroid, Pressure drop too small

Model	A (mm)	B(mm)	C (mm)	D (mm)	E (mm)	MAX.LC (mm)	Connection (mm)	Exchange area (m2)	Max. number of plates	Max. volume flow (m3/h)	Design pressure
M3 / B30B	N(2.5+X)	180	60	480	357	500	32	0.032	95	18	1.6
TS6M / S60H	N(4+X)	400	203	704	380	1200	65	0.086	147	50	1.6
M6 / B60B	N(2.0+X)	320	140	920	640	1200	50	0.15	250	36	1.6
M6M / B60H	N(3.0+X)	320	140	920	640	1200	50	0.15	203	36	1.6
K60B	N(2.0+X)	320	140	950	689	1200	50	0.12	250	36	1.6
K60H	N(3.0+X)	320	140	950	689	1200	50	0.12	203	36	1.6
M10B / B100B	N(2.55+X)	470	225	1069	719	1600	100	0.25	278	140	1.0/1.6/2.5
M10M / B100H	N(3.95+X)	470	225	1069	719	1600	100	0.25	180	140	1.0/1.6/2.5
K100B	N(2.55+X)	470	225	1099	763	1600	100	0.3	278	140	1.0/1.6/2.5
K100H	N(3.95+X)	470	225	1099	763	1600	100	0.3	180	140	1.0/1.6/2.5
TS20M / S200H	N(4+X)	800	363	1405	698	3000	200	0.3	400	600	1.6
TL10 / L100B	N(2+X)	480	225	1888	1338	3000	100	0.5	400	140	1.0
K150H	N(3.95+X)	610	298	1616	1095	3000	150	0.5	600	360	1.0/1.6/2.5
M15B / B150B	N(2.5+X)	610	298	1815	1294	3000	150	0.65	600	360	1.0/1.6/2.5
M15M / B150H	N(3.95+X)	610	298	1815	1294	3000	150	0.65	600	360	1.0/1.6/2.5
M20M / T20M / B200H	N(4+X)	780	353	2260	1478	3000	200	0.85	400	600	1.0/1.6
MX20B / MX25B / B250B	N(2.5+X)	920	439	2895	1939	3000	250	1.5	500	750	1.0/1.6/2.5
M30 / B350B	N(3.3+X)	1150	596	2882	1842	4800	350	1.85	700	997	1.0/1.6

High Efficiency
The embossed pattern of the YOJO's special heat transfer plates promotes high turbulence at low fluid velocities. The high turbulence results in very high heat transfer coefficients.

Compact Size
YOJO's brazed heat exchanger can be anywhere from 50% to 80% smaller than other types of heat exchangers. It requires less floor space due to the high thermal efficiency of the stainless steel. The plates are brazed together at high temperatures, allowing the heat exchanger to be compact, leak tight, and rugged.

Close Approach Temperatures
Close-approach temperatures of 1-2°F (0.5-1.0°C) are possible because of true counter flow and high heat transfer efficiency of the plates. This is an important factor in regeneration and heat recovery processes.

High Temperature and Pressure Ratings
YOJO's Brazed Plate Heat Exchanger maximum working pressures from 300 psi to 650 psi, and temperature ratings of 350°F.

Refrigeration Systems:
Evaporator,
Condenser,
Economizers and Desuperheaters
Air dryer
Heat pump
Absorption
chiller
HVAC
Radiant Floor,
Snow Melt,
Boiler and Solar water heat exchanger
District heating
Other Industrial applications such as:
Heat Recovery and Oil Cooler: Hydraulic oil cooling, engine oil cooling, and fuel oil heating.
Steam Heating.
Flat plate heat exchanger
Beer wort cooler
Milk pasteurization
Wind turbine oil cooler
Marine oil cooler