Description
White Fused Alumina / White Aluminum Oxide/White Fused Aluminum Oxide/Whit Corundum/WA /WFA
White Fused Alumina is a high purity, synthetic mineral,manufactured by the fusion of controlled quality pure grade Bayer Alumina in an electric arc furnace at temperatures greater than 2000C followed by a slow solidification process. Strict control over quality of raw materials and fusion parameters ensure products of high purity and high whiteness,high hardness, toughness is a bit low, excellent self sharpening, grinding force, low calorific value, high efficiency,acid and alkali resistance, good thermal stability.
Al2O3 white fused alumina compound refractory material is an optimal refractory material to make refractory products:
Section sand 0-1mm,1-3mm,2-3mm,3-5mm,5-8mm:
- Shaped refractory products such as refractory bricks
- Unshaped refractories aggregates in furnace building
Fine powder -100#,-200#,-320#:
- Unshaped refractories castables for ladles
- Refractory paint and coatings
- Foundry sand in precision casting
White corundum grain size sand ,high hardness and dense particles. Single-particle roundness is good.Uniform distribution of particle size, single-particle shape consistent,Chemical stability and, high-temperature stability is very good.
Grain size sand:- Abrasive tools made of it are suitable for grinding high-speed, high carbon steel,etc.
- It also can be used as materials for grinding and polishing, precision casting, spraying and coating, medium body for chemical industry, special ceramics and high-grade refractory materials,etc.
White Fused Alumina Micropowder
White Fused Alumina Fines:
white, strong cutting force. Good chemical stability and good insulation.
It is suitable for wet or dry sandblasting, suitable for ultra-fine grinding and polishing of crystal and electronic industries, and making advanced refractory materials, etc.
Used for refractory, castable:
Properties | 0-1mm 1-3mm 3-5mm 5-8mm | 0-100 0-200 0-325 |
Guarantee Value | Typical Value | Guarantee Value | Typical Value |
Chemical Composition | Al2O3 | ≥99 | 99.5 | ≥98.5 | 99.0 |
SiO2 | ≤0.4 | 0.06 | ≤0.30 | 0.08 |
Fe2O3 | ≤0.2 | 0.04 | ≤0.20 | 0.10 |
Na2O | ≤0.4 | 0.30 | ≤0.40 | 0.35 |
Used for abrasives, blasting, grinding:
Properties | Grains |
24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# |
Guarantee Value | Typical Value |
Chemical Composition | Al2O3 | ≥99 | 99.50 |
SiO2 | ≤0.2 | 0.04 |
Fe2O3 | ≤0.2 | 0.04 |
Na2O | ≤0.3 | 0.23 |
Used for abrasives, lapping, polishing:
Properties | Micropowder |
W63 W50 W40 W28 W20 W14 W10 W7 W5 W3.5 W2.5 W1.5 W0.5 |
F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000 |
240# 280# 320# 360# 400# 500# 600# 700# 800# 1000# 1200# 1500# 2000# 2500# 3000# 4000# 6000# 8000#10000# |
Guarantee Value | Typical Value |
Chemical Composition | Al2O3 | ≥99 | 99.20 |
SiO2 | ≤0.4 | 0.08 |
Fe2O3 | ≤0.2 | 0.06 |
Na2O | ≤0.4 | 0.35 |
- Refractory material, furnace charge, castable, pounding material, refractory brick, casting, etc.
- Sandblasting ,semiconductor sandblasting, silicon wafer sandblasting, circuit board sandblasting, surface treatment, rust removal, mobile phone shell sandblasting, kitchenware sandblasting, tungsten, molybdenum, titanium and other rare metal products such as cemented carbide, etc.
- Makeup industry Cosmetics, manufacture of beauty handicrafts, dermabrasion, etc.
- Ceramic products, grinding, polishing, chamfering, etc.
- Sandblasting, grinding and polishing of hardware, titanium alloy glasses frames, etc.
- Ceramic glaze, epoxy sand, wear-resistant floor coatings, powder coatings, environmental protection coatings, anti-corrosion coatings, wear-resistant floor coating additives, etc.
- Production of whetstones, grinding stones, whetstones and other products
- Polishing wax, polishing liquid, polishing paste, etc.
- Buttons, mobile phone cases, silver rubbing rods and other polishing abrasives, abrasives and other abrasive media
- Flooring, adhesives, electronic glue, FRP wear-resistant plates, FRP surface paint, etc.
- Production of ceramic filter plates, foam ceramic filters, porous ceramics, water-absorbing ceramics, filter ceramics, honeycomb ceramics, etc.
- Ceramic separation membrane/ceramic membrane/ceramic flat membrane/flat ceramic membrane/tubular ceramic membrane/filter membrane/membrane module
- Production of diamond grinding wheels, etc., silicon wafers, dry/water grinding discs for diamond tools, resin grinding discs, resin gel coats, wear-resistant layers of insulating plates, etc.
- Production of stone polishing wheels, etc. / polishing stone, pebbles, marble, granite, jewelry agate, etc.
- Production of FRP grids, production of platinum melting crucibles, etc.
- Casting instead of zirconium powder
- Shell body material
- Rubber roller/optoelectronic industry/ceramic/diamond resin grinding wheel/washing table surface coating filler
- Quartz glass cutting material, spacer powder for ceramic dewaxing, etc.
- Floor/floor paint/resin gel coat/coating/non-stick pan coating/powder coating wear-resistant powder/inorganic zinc-rich anti-skid coating, paint primer wear-resistant powder, etc.
1 MT big bag or 25kg paper bag *40 bags on one pallet ; As per customer's requirement
Our company enjoys a well-developed management system and quality system. We have various equipment including 7 smelting furnace, 4 grinding miller, 5 ball grinder, a central laboratory, an OMEC particle size analyzer, a Slap sieving machine, a microscope and other high-tech instruments. The annual production capacity can reach to 50,000 tons according to user demand sub-brand production. Our products, with high cleanliness, strong adaptability and stable performance, are exported to Europe, North and South America, Australia, Japan, Korea, Taiwan, Thailand, Singapore, Malaysia and other more than 30 regions and countries, enjoying a good reputation.
1. We are a manufacturer, which can control the cost easier than trade companies also can give you an answer more quickly.
2. As a manufacturer, we know much in technique and can give you more support in technique problems.
3. Professional and experienced service team, specialized in abrasive production, more than 10 years.
4. Our products are complete in specifications of various sizes.
5. We enjoy a good reputation in the customers in domestic and overseas markets.
6. Large production capacity, short lead time of products.
7. 24*7 online service.
Q1: Are you a trading company of a factory?A1: We are a professional factory, which has produced abrasive material since 2009.
Q2: Can you provide free samples?
A2: Yes, free samples under 1kg are provided.
Q3: What is your payment term?
A3: L/C or T/T 30% deposit, and 70% balance at sight of BL copy.
Q4: What's your package?
A4: 25kg/woven bag or a kraft paper bag. Package can be customized.
Complaint
